ALLSOME BG-5167

Contents

ALLSOME 6-Speed 800W Benchtop Drill Press Drilling Machine BG-5167

User Manual

1. Introduction

This manual provides instructions for the safe operation, maintenance, and troubleshooting of your ALLSOME BG-5167 6-Speed 800W Benchtop Drill Press. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

ALLSOME 6-Speed 800W Benchtop Drill Press
Figure 1: ALLSOME BG-5167 Benchtop Drill Press

2. Safety Instructions

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this power tool.

  • Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves.
  • Ensure the work area is clean, well-lit, and free from obstructions.
  • Secure the workpiece firmly before drilling.
  • Do not operate the drill press in damp or wet conditions.
  • Keep hands and loose clothing away from moving parts.
  • Disconnect power before making adjustments or changing accessories.
  • Do not force the tool; let the drill bit do the work.
  • Ensure the drill press is stable and securely mounted on a workbench.

3. Product Components

Familiarize yourself with the main parts of your drill press:

Product dimensions and labeled components
Figure 2: Key Components and Dimensions
  • Switch: Power ON/OFF control.
  • Operating Handle: Used to lower and raise the drill chuck.
  • External Carbon Brush: Access point for carbon brush replacement.
  • Stroke Pointer: Indicates the drilling depth.
  • Stainless Steel Chuck: Holds the drill bits.
  • Bold Column: Main support structure for the drill head.
  • Chassis Fixing Screw Hole: For securing the base to a workbench.
  • Accessory Fixing Slot: For mounting additional accessories like vises or worktables.
  • Thickened Base: Provides stability for the machine.

4. Setup and Assembly

The ALLSOME BG-5167 Benchtop Drill Press typically comes partially assembled. Follow these general steps for final setup:

  1. Unpacking: Carefully remove all components from the packaging. Check for any damage or missing parts.
  2. Base Installation: Place the thickened base on a stable, level workbench. Secure it using appropriate fasteners through the chassis fixing screw holes to prevent movement during operation.
  3. Column Assembly: Ensure the bold column is firmly seated and secured to the base.
  4. Drill Head Mounting: Mount the drill head assembly onto the column, ensuring it slides smoothly and can be locked at the desired height.
  5. Handle Attachment: Attach the operating handle to the drill head mechanism.
  6. Chuck Installation: If the chuck is not pre-installed, insert it into the spindle and secure it according to the chuck's specific instructions.
  7. Power Connection: Connect the power cord to a suitable 220V/50Hz power outlet.

Compatible Accessories

The BG-5167 is compatible with various accessories to enhance its functionality:

  • Compatible Worktables: BG-6300, BG-6330
  • Compatible Vises: BG-6369, BG-6368, BG-515806, BG-6257
Compatible Worktables for BG-5167
Figure 3: Compatible Worktables (BG-6300, BG-6330)
Compatible Vises for BG-5167
Figure 4: Compatible Vises (BG-6369, BG-6368, BG-515806, BG-6257)

5. Operating Instructions

  1. Select Drill Bit: Choose the appropriate drill bit for your material and desired hole size. The chuck can accommodate bits with a clamping diameter of Ø1.5-13mm.
  2. Install Drill Bit: Insert the drill bit into the chuck and tighten it securely using the chuck key.
  3. Adjust Height: Loosen the drill head locking mechanism and adjust the drill head to the desired height above the workpiece. Re-tighten the locking mechanism.
  4. Secure Workpiece: Place your workpiece on the base or a compatible worktable. Use a vise or clamps to secure the workpiece firmly to prevent it from moving during drilling.
  5. Set Drilling Depth: Use the depth stop mechanism to set the desired drilling depth. The stroke pointer will indicate the current depth. The maximum work travel (stroke) is 60mm.
    Depth stop mechanism
    Figure 5: Depth Stop Mechanism
    Stroke pointer and depth scale
    Figure 6: Stroke Pointer and Depth Scale
  6. Power On: Flip the power switch to the ON position.
  7. Drilling: Slowly lower the drill bit into the workpiece using the operating handle. Apply steady, even pressure. Do not force the drill. The machine offers 6-speed settings (0-2800r/min) for various materials.
    Drilling action with operating handle
    Figure 7: Drilling Operation
  8. Power Off: Once drilling is complete, raise the drill bit from the workpiece and turn off the power switch.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your drill press.

  • Cleaning: After each use, clean the machine to remove dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
  • Lubrication: Periodically lubricate moving parts such as the column and spindle to ensure smooth operation.
  • Carbon Brushes: Check the external carbon brushes periodically for wear. Replace them when they are worn down to prevent motor damage.
  • Chuck Maintenance: Keep the chuck clean and free of debris. Ensure it opens and closes smoothly.
  • Power Cord: Inspect the power cord for any signs of damage. Replace immediately if damaged.

7. Troubleshooting

Problem Possible Cause Solution
Drill press does not start No power supply; Faulty switch; Worn carbon brushes Check power connection; Inspect/replace switch; Replace carbon brushes.
Excessive vibration Loose drill bit; Unsecured workpiece; Damaged drill bit Tighten drill bit; Secure workpiece; Replace drill bit.
Drill bit not cutting efficiently Dull drill bit; Incorrect speed setting; Insufficient pressure Sharpen or replace drill bit; Adjust speed; Apply steady pressure.

8. Technical Specifications

Feature Specification
Model Number BG-5167
Rated Voltage 220V
Frequency 50Hz
Rated Input Power 800W
No-Load Speed 0-2800r/min (6-speed)
Clamping Diameter Ø1.5-13mm
Max. Drilling Diameter 13mm
Work Travel (Stroke) 60mm
Drilling Capacity (Iron) Ø8mm
Drilling Capacity (Wood) Ø30mm
Weight 12 Kg (Product), 8.9 Kg (Package)
Power Source AC
Drill Type Drill Press
Application 1.5-13mm drilling
Package Dimensions (L x W x H) 55cm x 27cm x 20cm

9. User Tips

Based on user feedback, consider the following tips for an improved experience:

  • Handle Clearance: Be aware that the action lever may conflict with the height adjustment wheel handle when the drill head is in its lowest position. Adjust accordingly.
  • Height Adjustment: Note that some height adjustment bolts are hand-operated, while others may require an Allen key. Keep the necessary tools handy.
  • Depth Scale Interpretation: The centimeter depth scales might appear reversed to some users. Always double-check your desired drilling depth before operation.
  • Quiet Operation: Users have noted the machine operates very quietly, contributing to a more pleasant working environment.
  • Precision: This tool is considered precise and suitable for DIY enthusiasts.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance, refer to the contact information provided at the point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.