1. Introduction
Thank you for choosing the Hirisi S8 Wireless Bite Alarm Set. This advanced fishing accessory is designed to enhance your carp fishing experience by providing reliable bite indication and remote monitoring. The set includes multiple bite alarms and a 2-way remote control receiver, ensuring you never miss a bite. Made from durable ABS material, these alarms are built for performance and longevity in various fishing conditions.

2. Product Overview and Features
The Hirisi S8 set offers a comprehensive solution for bite detection, featuring both visual and auditory alerts, along with remote control capabilities.
Key Features:
- Wireless 2-Way Remote Control: Allows for remote adjustment of settings and reception of bite signals up to 150 meters.
- Adjustable Sensitivity (S): Customize the alarm's sensitivity to detect subtle or aggressive bites.
- Adjustable Tone (T): Select from various tones for personalized audio alerts.
- Adjustable Volume (V): Control the sound level of the alarms and receiver.
- Night Light Function: Integrated night light for enhanced visibility during low-light conditions.
- Anti-Theft Function: Provides an additional layer of security for your fishing equipment.
- Run/Drop Indication: Distinct visual and auditory signals for line running out (run) or slackening (drop).
- Durable Construction: Made from ABS material for robust performance.

3. Setup Instructions
3.1 Battery Installation
- Locate the battery compartment on the back of each bite alarm and the remote receiver.
- Open the battery cover.
- Insert the required batteries (typically 9V for the receiver and smaller batteries for the alarms, specific types may vary, please check product packaging). Ensure correct polarity.
- Securely close the battery cover. The covers are designed to fit tightly for protection.

3.2 Mounting the Bite Alarms
- Attach each bite alarm to your rod pod or bank stick. The alarms typically screw onto a standard fishing rod support.
- Ensure the alarms are securely fastened and stable.
- Place your fishing rod onto the bite alarm's cradle.
- Thread your fishing line through the alarm's roller wheel.


4. Operating Instructions
4.1 Power On/Off
- To power on/off the bite alarms: Long press the "Function" button on each alarm.
- To power on/off the remote receiver: Long press the power button (usually marked with a circle and vertical line) on the receiver.
4.2 Adjusting Settings on Bite Alarms
Each bite alarm features three rotary knobs for adjustment:
- Volume (V): Rotate the 'V' knob to increase or decrease the alarm's sound level.
- Tone (T): Rotate the 'T' knob to change the pitch of the alarm sound.
- Sensitivity (S): Rotate the 'S' knob to adjust how much line movement is required to trigger the alarm. Higher sensitivity detects more subtle bites.
The alarms also feature distinct LED indicators for 'Run' (line moving away) and 'Drop' (line slackening), often accompanied by different tones.

4.3 Adjusting Settings on Remote Receiver
The remote receiver allows you to mirror and control settings from a distance:
- Volume (V): Use the 'V' buttons on the receiver to adjust its volume.
- Tone (T): Use the 'T' buttons to change the tone of the receiver's alerts.
- Sensitivity (S): Use the 'S' buttons to adjust the sensitivity of the paired alarms remotely.
- Night Light: Activate the night light function on the receiver for visibility in the dark.
- Anti-Theft Function: Engage the anti-theft function to trigger an alarm if a rod is removed from a paired bite alarm.
5. Maintenance
- Cleaning: Wipe down the alarms and receiver with a soft, damp cloth after each use to remove dirt and debris. Avoid harsh chemicals.
- Battery Care: Remove batteries if the device will not be used for an extended period to prevent leakage. Replace batteries when performance degrades.
- Storage: Store the bite alarm set in its protective case in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance: While many users report good performance in rainy conditions, these devices are generally designed to be water-resistant, not fully waterproof. Avoid submerging them in water.

6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/device not turning on | Dead or incorrectly installed batteries. | Check battery polarity. Replace with fresh batteries. Ensure battery covers are tightly closed. |
| No signal/poor range | Obstructions between alarm and receiver, or too far apart. Low battery. | Reduce distance between alarm and receiver. Ensure clear line of sight. Replace batteries. |
| False alarms or missed bites | Sensitivity set too high or too low. Wind or water movement. | Adjust sensitivity (S) setting. Experiment with different levels to suit conditions. |
| Alarms not pairing with receiver | Incorrect pairing procedure. | Refer to the specific pairing instructions in the full manual (if available) or contact support. Ensure both devices are in pairing mode. |
| Different tones for 'run' and 'drop' not working | Feature not enabled or specific model variation. | The Hirisi S8 is designed to provide distinct tones for 'run' and 'drop' indications. If not working, check settings or contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Hirisi |
| Model | S8 |
| Type | Fish Bell/Alarm |
| Material | ABS |
| Wireless Range | Up to 150 meters (approx. 492 feet) |
| Remote Control | 2-Way |
| Adjustable Settings | Volume, Tone, Sensitivity |
| Special Functions | Night Light, Anti-Theft |
| Package Weight | 0.8 kg (approx. 1.76 lbs) |
| Package Dimensions | 45cm x 35cm x 15cm (approx. 17.7in x 13.8in x 5.9in) |
| Origin | Mainland China |
8. User Tips
- Weather Resistance: Many users report that the alarms perform reliably even in rainy conditions.
- Battery Covers: The battery covers are designed to close very tightly, which helps in protecting the internal components.
- Field Testing: It is recommended to test the alarms and receiver thoroughly during actual fishing sessions to familiarize yourself with their functionality and optimal settings for your environment.
- Quality Assurance: Users consistently praise the quality and functionality of the Hirisi S8 set, noting its professional performance.
9. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the Hirisi Official Store directly through the platform where you purchased the product. Ensure you retain your proof of purchase.