1. Introduction and Overview
The Lumintop D3 is a high-performance, versatile flashlight designed for various lighting demands, including rescuing, searching, camping, and hiking. It features a powerful SFN60 3V LED, delivering up to 7500 lumens and a beam distance of up to 650 meters. The flashlight is equipped with a magnetic tail cap for hands-free operation and a convenient USB Type-C charging port. Its robust aluminum body with Type III hard-coat anodizing ensures durability, while the IP68 rating provides excellent water and dust resistance.


2. Setup
2.1 Battery Installation
The Lumintop D3 requires one 26800 Li-ion battery (not included). To install the battery:
- Unscrew the tail cap of the flashlight.
- Insert the 26800 Li-ion battery with the positive (+) terminal facing towards the head of the flashlight.
- Screw the tail cap back on securely.

2.2 Charging
The D3 flashlight features a USB Type-C charging port and supports QC2.0/3.0 and PD3.0 fast charging protocols, with a maximum charging current of 4A. It includes overcharged protection.
- Locate the USB Type-C port on the flashlight body.
- Connect a USB Type-C cable to the port and the other end to a compatible power source.
- The built-in charging indicator will blink while charging and remain constant on when fully charged.
- Charging typically takes about 3 hours for a full charge.


3. Operating Instructions
The Lumintop D3 features a single tactile switch with a back-lit rubber boot for all operations. It has General modes (Low, Med, High) and Hidden modes (Moonlight, Turbo, Strobe, SOS, Beacon).

- ON/OFF: Fully press the switch once to turn the flashlight ON or OFF.
- Output Change (Ramping): From the ON state, press and hold the switch to smoothly ramp the brightness up or down. Release the button to select the desired output level. The flashlight has a mode memory function.
- Turbo: From the ON state, perform two quick clicks of the switch to activate Turbo mode. Another click will return to the general mode.
- Moonlight: From the OFF state, press and hold the switch to enter Moonlight mode.
- Strobe/SOS/Beacon: From Moonlight mode, perform two quick clicks to enter Strobe mode. Another two quick clicks will cycle through SOS and Beacon modes.
- Battery Check: From the OFF state, continuously click the switch three times. The flashlight will blink to indicate the battery voltage (e.g., 3.8V is indicated by 3 blinks, then a pause, then 8 blinks).
- Lock-out/Unlock: From the OFF state, click the switch four times. Momentary low output is available when the switch is pressed and held in lockout mode. To unlock, click the switch four more times, or slightly loosen and then re-tighten the threads to cut off and restore electricity.
- Switch Back-lit Light ON/OFF: From the OFF state, click the switch seven times to toggle the back-lit light on or off.
4. Features
- High-Performance LED: Equipped with a SFN60 3V LED, offering high and stable outputs.
- USB-C Rechargeable: Supports QC2.0/3.0, PD3.0 fast charging with a max 4A current and overcharged protection.
- Max 7500 Lumens Output: Provides powerful illumination for various tasks.
- Max 650 Meters Throw: Long-range beam distance for extended visibility.
- Magnetic Tail Cap: Allows for hands-free attachment to metal surfaces.
- IPX-8 Rated Protection: Capable of underwater submersion up to 2 meters for 30 minutes and totally dustproof.
- Lock-out Function: Prevents accidental activation.
- Mode Memory: Remembers the last used general output level.
- Multiple Protection: Includes low-voltage protection and overheat protection.




5. Specifications
| Feature | Description |
|---|---|
| Emitter | High-performance SFN60 3V LED |
| Lifespan | Up to 50,000 hours |
| Power | 78W |
| Output | Up to 7500 lumens (Turbo) |
| Intensity | 91600cd (ANSI throw 650 meters) |
| Tail | Magnetic tail |
| Battery | One 26800 Li-ion battery (not included) |
| Lens | Glass with Anti-reflective coating |
| Body | Aluminum with TYPE III hard-coat anodizing |
| Button | Tactile with back-lit rubber boot |
| Ingress Rating | Equivalent to IP68 (underwater 2m for 30min) |
| Weight | ~182g (without battery) |
| Dimensions | 135mm (Length) * 45.5mm (Head) * 31.5mm (Tube) |
| Charging | USB Type-C (QC2.0/3.0, PD3.0 fast charging, Max 4A) |

Runtime Table (Approximate)
| Mode | Output (LM) | Runtime | Distance |
|---|---|---|---|
| Moonlight | 1.5 | 30 Days | N/A |
| Low | 200 | 21 H | N/A |
| Med | 1000 | 3 H 30 Min | N/A |
| High | 3000 | 50 S + 3 H 20 M | N/A |
| Turbo | 7500 | 30 S + 3 H 20 M | 650 M (Max) |
| Strobe/SOS/Beacon | 3000 | N/A | N/A |
Note: The above approximate data are lab-tested using a 26800 Li-ion battery. Runtime on Turbo is accumulated due to over-heat protection.
6. Maintenance
- Cleaning: Regularly clean the threads and O-rings with a clean cloth. Apply silicone grease to the O-rings periodically to maintain water resistance.
- Battery Care: If the flashlight will not be used for an extended period, remove the battery to prevent leakage. Store batteries in a cool, dry place.
- Water Resistance: Ensure the rubber plug for the USB-C port is securely sealed to maintain IP68 water resistance. The D3 is not designed for diving or long-term underwater use.
- Lens Care: Keep the lens clean from dust and debris to ensure optimal light output. Use a soft, lint-free cloth for cleaning.

7. Troubleshooting
- Flashlight not turning on:
- Ensure the battery is correctly installed with the positive (+) terminal facing the head.
- Check if the battery is charged. If not, connect it to a Type-C charger.
- Verify that the flashlight is not in lockout mode (4 clicks from OFF to unlock).
- Ensure the tail cap is screwed on tightly to make proper electrical contact.
- Output not changing/ramping:
- Ensure the flashlight is ON. Press and hold the switch to ramp the output. If it's not ramping, try turning it off and on again.
- Charging indicator not working:
- Check the USB Type-C cable and power source for proper connection and functionality.
- Ensure the flashlight is not already fully charged (indicator would be constant on).
- Flashlight gets hot on Turbo mode:
- This is normal for high-output flashlights. The D3 has overheat protection which will automatically reduce output to prevent damage. Allow the flashlight to cool down.
8. User Tips
- The D3's robust build quality and magnetic tail cap make it ideal for hands-free work, such as under a car hood.
- The intuitive controls, including the ramping feature, allow for quick and precise brightness adjustments.
- Despite its high output, the D3 manages heat well, even in Turbo mode, making it reliable for extended use in various conditions.


9. Warranty and Support
For warranty information, product support, or to view additional item guides and documents, please refer to the official Lumintop website or contact your retailer. A user manual in PDF format is available for download from the seller's product page.
PDF Reference: Lumintop D3 User Manual (PDF)