1. Introduction
The PULUZ Wireless Lavalier Microphone is a portable audio and video recording solution designed for use with iPhone and Android devices. It offers high-fidelity sound capture, intelligent noise reduction, and a convenient plug-and-play setup, making it ideal for live streaming, vlogging, interviews, and other content creation scenarios.
Video: PULUZ Wireless Lavalier Microphone Product Demonstration
2. Package Contents
Please check the box for the following items:
- Wireless Microphone Transmitter(s) (1 or 2, depending on your selection)
- Receiver (Type-C or 8-Pin, depending on your selection)
- Monitor Headphones
- Windproof Fleece (for microphone)
- Charging Cable
- User Manual
- Storage Box
Image: Complete Package Contents
3. Key Features
- 2.4G Wireless Connection: Provides up to 48K high-fidelity recording with low latency.
- Intelligent Noise Reduction (ENC): Built-in chip for strong anti-interference ability, ensuring clear recording even in noisy environments.
- 360° Omnidirectional Pickup: High-sensitivity condenser microphone captures sound equally from all directions, restoring pure audio.
- Bluetooth (BT) Mode: Allows for karaoke, adding background sound during recording, and a 'Dodge' function.
- Dodge Function: In Bluetooth mode, automatically suppresses background music when the main sound is detected, highlighting the primary audio.
- Reverb Function: Enhances audio with a reverb effect for a more immersive sound.
- Long Battery Life: 300mAh high-capacity battery offers over 10 hours of continuous recording and 6 months of standby time (off state).
- Plug and Play: No app or Bluetooth connection is required for basic recording (using the receiver).
- 10m Barrier-Free Transmission: Reliable wireless range for flexible use.
Image: Intelligent Noise Reduction DSP Chip
Image: 360° Omnidirectional Pickup Diagram
Image: Microphone Battery Life Indicator
Image: 10m Barrier-Free Transmission Diagram
4. Setup Instructions
- Unpack: Carefully remove all components from the storage box.
- Charge: Ensure the microphone transmitter(s) are fully charged using the provided charging cable. The battery indicator will show charging status.
- Connect Receiver: Plug the appropriate receiver (Type-C or 8-Pin) directly into your smartphone or tablet's charging port. The receiver does not require a separate power source.
- Power On Microphone: Press and hold the power button on the microphone transmitter(s) until the indicator light turns on, indicating it's powered on and ready to pair.
- Automatic Pairing: The microphone transmitter(s) will automatically pair with the receiver. A successful connection is usually indicated by a solid light on both devices.
- Attach Microphone: Clip the microphone transmitter securely to your clothing, ensuring the microphone head is facing towards your mouth for optimal sound capture. You can attach the windproof fleece for outdoor use or to reduce plosives.
Important Note: For recording, you MUST use the receiver. Bluetooth connection is primarily for background music playback and monitoring, not for recording audio from the microphone itself.
Image: Plug and Play Setup with Receiver
5. Operating Instructions
5.1 Basic Recording
Once the receiver is plugged into your device and the microphone transmitter is powered on and paired, you can begin recording using your device's native camera app or any third-party recording application. The microphone will automatically be recognized as the audio input source.
5.2 Noise Reduction (ENC)
The microphone features built-in intelligent noise reduction (ENC) which is enabled by default. This helps to filter out ambient noise, ensuring clearer audio in various environments.
5.3 Bluetooth Mode (Background Music & Dodge Function)
To use the Bluetooth mode for background music or the 'Dodge' function:
- Ensure the microphone transmitter is powered on.
- On your smartphone, go to Bluetooth settings and connect to the microphone (e.g., "Wireless M2").
- In Bluetooth mode, you can play background music from your device.
- To activate the 'Dodge' mode, press the volume up button on the microphone for 2 seconds. When 'Dodge' mode is active, the background music volume will automatically decrease when you speak into the microphone, highlighting your voice. This function is only active in Bluetooth mode.
Image: Bluetooth Mode Connection Diagram
5.4 Reverb Function
The microphone includes a reverb function to add an echo effect to your audio, making it sound more dynamic. Refer to the specific buttons on your microphone transmitter for activating and deactivating the reverb function (usually a dedicated button or a long press on a volume button).
5.5 Monitoring
Connect the monitor headphones to the microphone transmitter's monitoring port to listen to your audio in real-time during recording. This allows you to ensure optimal sound quality and adjust your speaking volume as needed.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the microphone and receiver. Do not use liquid cleaners or abrasive materials.
- Storage: Store the microphone system in its provided storage box when not in use to protect it from dust and damage.
- Battery Care: To prolong battery life, avoid fully discharging the microphone frequently. Charge it regularly, even if not in constant use.
- Avoid Extreme Conditions: Do not expose the device to extreme temperatures, humidity, or direct sunlight.
7. Troubleshooting
- Microphone not recording:
- Ensure the receiver is securely plugged into your device's charging port.
- Verify the microphone transmitter is powered on and successfully paired with the receiver (indicated by solid lights).
- Confirm that you are NOT attempting to record via Bluetooth. The microphone requires the physical receiver for audio input during recording. Bluetooth is for background music playback only.
- Check your device's audio input settings to ensure the external microphone is selected.
- Ensure the microphone is charged.
- Poor audio quality/noise:
- Ensure the windproof fleece is properly attached, especially in windy conditions.
- Check for obstructions between the microphone and receiver.
- Ensure you are within the effective transmission distance (up to 10 meters).
- Avoid placing the microphone too close to external noise sources.
- No sound from monitor headphones:
- Ensure headphones are fully plugged into the microphone transmitter's monitoring port.
- Check headphone volume settings on the microphone or your device.
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Lavalier Wireless Microphone |
| Channel System | Dual Microphone one Receiver (or Single Microphone one Receiver) |
| Control Method | Button |
| Active/Passive | Active |
| 2.4G Solution | Jerry AD6976M4 |
| Working System | GFSK |
| Working Frequency | 2.4G-2.4835GHZ |
| Radio Sensitivity | -38db |
| Effective Distance | ≥ 10 meters |
| Transmitter Shutdown Power Consumption | 2ua |
| Transmitter Power Consumption (Video Mode) | 25ma |
| Transmitter Power Consumption (Bluetooth Mode) | 30-40ma |
| Receiver Power Consumption | 16ma |
| Receiver Charging Current for Mobile Phone | 1000ma |
| Microphone Signal-to-Noise Ratio | ≥ 65db |
| Frequency Response | 20Hz-20KHz |
| Monitoring | One-way monitoring |
| Microphone Type | Electret Condenser Microphone |
| Battery Capacity | 300mAh |
| Talk Time | More than 10 hours |
| Standby Time (off state) | 6 months |
| Charging Input Standard | DC-5V/MAX 200+/-10mA |
| Charging Time | 1.5-2 hours |
9. User Tips
- Verify Connector Type: Before purchasing, always confirm whether your device requires a Type-C or an 8-Pin (Lightning) receiver to ensure compatibility.
- Check Your Order: Double-check your order details to ensure you have selected the correct configuration (single or dual microphones, and the correct receiver type) to match your needs.
- Optimal Placement: For the best sound quality, position the lavalier microphone approximately 6-8 inches (15-20 cm) from your mouth.
- Outdoor Use: Always use the provided windproof fleece when recording outdoors to minimize wind noise.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official PULUZ website. Keep your purchase receipt as proof of purchase.
