1. Introduction
Thank you for choosing the Deerma X30 Floor Scrubber Vacuum Cleaner. This innovative appliance combines vacuuming, mopping, steaming, and washing functions to provide a comprehensive and hygienic cleaning solution for your home. With its 100°C high-temperature steam, dual-axis brushes, and smart features, the X30 is designed to tackle stubborn dirt, eliminate germs, and leave your floors spotless and sanitized.
Please read this manual thoroughly before operating the appliance to ensure safe and effective use. Keep this manual for future reference.
2. Important Safety Information
- Always connect the appliance to a grounded power outlet.
- Do not immerse the appliance in water or other liquids.
- Keep hands, hair, and loose clothing away from moving parts.
- Do not use the appliance to pick up flammable or combustible liquids, or anything that is burning or smoking.
- Exercise extreme caution when using steam. Steam is hot and can cause burns. Do not direct steam at people, pets, or electrical outlets.
- Ensure the water tanks are correctly installed before operation.
- Unplug the appliance before performing any maintenance or cleaning.
- This appliance is designed for household use only. Do not use outdoors or for commercial purposes.
- Keep out of reach of children.
3. Package Contents
Please check the contents of your package. If any items are missing or damaged, contact customer support.
- Deerma X30 Floor Scrubber Vacuum Cleaner (Main Unit)
- Power Cord
- Charging/Storage Base
- Instruction Manual (this document)
4. Product Overview
Familiarize yourself with the components of your Deerma X30 Floor Scrubber for optimal use.
5. Setup
5.1 Assembly
- Carefully remove all components from the packaging.
- Insert the handle into the main body until it clicks securely into place.
- Place the appliance on its charging/storage base.
5.2 Filling the Water Tanks
The Deerma X30 has two water tanks: a clean water tank and a dirty water tank.
- Clean Water Tank: Locate the clean water tank (typically marked or transparent for clean water). Remove the cap and fill it with clean tap water. Do not add any chemical cleaning agents unless specifically designed for steam cleaners and approved by Deerma. The tank capacity is 500mL.
- Dirty Water Tank: Ensure the dirty water tank (capacity 600mL) is empty and properly installed before use.
6. Operating Instructions
The Deerma X30 offers multiple cleaning functions and modes for various cleaning needs.
6.1 Powering On/Off
- Plug the power cord into a suitable electrical outlet.
- Press the Power button on the handle to turn the appliance ON.
- Press the Power button again to turn the appliance OFF.
6.2 Selecting Cleaning Modes
The appliance features a smart voice assistant and indicator lights to guide you. Press the Mode button to cycle through the available cleaning modes:
- Kitchen Steam Mode: Ideal for quickly cleaning kitchen waste and stubborn grease. This mode utilizes high-temperature steam to dissolve tough stains.
- Living Room Standard Mode: For general vacuuming and mopping of everyday dirt and spills.
- Bathroom Water Absorption Mode: Designed for quickly absorbing standing water in bathrooms or other wet areas.
6.3 General Operation
- Once a mode is selected, push the appliance forward and pull it back slowly over the area to be cleaned. The bidirectional floating traction makes maneuvering easy.
- The dual-axis brushes will simultaneously wash the floor with clean water (and steam in steam mode) and wipe it dry, while the dual inner spiral suction channels collect dirt and wastewater.
- The appliance provides real-time voice reminders for low clean water or full dirty water tanks.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Deerma X30.
7.1 Emptying the Dirty Water Tank
- When the dirty water tank is full (indicated by a voice reminder and flashing red lights), turn off and unplug the appliance.
- Remove the dirty water tank and carefully dispose of the contents. The solid and liquid separation feature helps in easy disposal without dirtying your hands.
- Rinse the tank and filter screen with clean water. Ensure the laminated filter screen is free of debris to prevent backflow.
- Reinstall the clean dirty water tank.
7.2 Self-Cleaning Function
The X30 features a one-key steam self-cleaning function for brushes and pipes.
- After cleaning, place the appliance on its base.
- Press the self-cleaning button (refer to Figure 4.3 for button location).
- The appliance will initiate a 30-second high-temperature steam cleaning program, automatically cleaning the brushes and internal pipes.
7.3 Descaling Mode
To prevent scale buildup, especially in hard water areas, use the descaling mode periodically.
- Add a small amount of citric acid (not included) to the clean water tank.
- Activate the descaling mode (refer to the control panel or voice prompts for specific instructions). This helps prevent scale from blocking the steam pipes.
7.4 Brush Maintenance
- To remove the dual-axis brushes for deeper cleaning or replacement, open the side cover of the floor brush (latch-type design).
- Use the small handle on the edge of the brushes to easily pull them out.
- Clean any entangled hair from the brushes. The double-row metal sawtooth design helps minimize entanglement, but occasional manual cleaning may still be necessary.
- Rinse the brushes under running water and allow them to air dry completely before reinstallation.
8. Troubleshooting
If you encounter issues with your Deerma X30, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Appliance not plugged in; Power outlet malfunction | Ensure power cord is securely plugged into a working outlet. Check circuit breaker. |
| No steam production | Clean water tank empty; Scale buildup; Steam boiler malfunction | Fill clean water tank. Run descaling mode. If problem persists, contact support. |
| Poor cleaning performance | Dirty brushes; Clogged suction channels; Dirty water tank full | Clean or replace brushes. Empty and clean dirty water tank. Check suction channels for blockages. |
| Roller brush stall reminder (2 lights flash green for 5 seconds) | Brush entangled with hair/debris; Motor overload | Turn off and unplug. Remove and clean brushes thoroughly. Remove any obstructions. |
| Voice reminder for low clean water | Clean water tank is low | Refill the clean water tank. |
| Voice reminder for full dirty water | Dirty water tank is full | Empty and clean the dirty water tank. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | MAGIC SEAL (Deerma) |
| Model | X30 |
| Power (W) | 1400-1799W |
| Function | Wet and Dry, Steam Cleaning, Vacuum, Mop, Wash |
| Filter Type | HEPA |
| Cord Length (m) | About 4 meters (5m power cord mentioned in description) |
| Voltage | 220 V |
| Clean Water Tank Capacity | 500mL |
| Dirty Water Tank Capacity | 600mL |
| Steam Temperature | ≥100°C |
| Steam Production Time | 15 seconds |
| Steam Flow Rate | 30mL/min |
| Sterilization Rate | 99.99% |
| Dust Mite Removal Rate | 100% |
| Waterproof Rating | IPX4 |
| Package Weight | 16.0 kg |
10. User Tips
- Voltage Compatibility: The Deerma X30 operates on 220V. If your region uses 110V (e.g., Mexico, USA, Canada), you will need a suitable voltage converter to operate the appliance safely and effectively. Using it directly with 110V may damage the unit or prevent it from functioning correctly.
- HEPA Filter: The appliance uses a HEPA filter. For optimal performance and air quality, check and clean the HEPA filter regularly. Replacement HEPA filters can be purchased from authorized Deerma retailers or service centers.
- Descaling: To maintain steam performance, especially in areas with hard water, perform the descaling procedure regularly using citric acid as instructed in the maintenance section.
- Edge Cleaning: Take advantage of the upgraded borderless brushes by guiding the cleaner along walls and furniture edges to ensure thorough cleaning in hard-to-reach areas.
11. Warranty and Support
The Deerma X30 Floor Scrubber Vacuum Cleaner comes with a manufacturer's warranty. For detailed warranty information, including terms, conditions, and duration, please refer to the warranty card included with your product or contact Deerma customer support.
For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts and accessories, please contact the authorized Deerma service center in your region. Keep your purchase receipt as proof of purchase for warranty claims.
