Infitary LED Car Headlights (H1, H4, H7, H11, 9005, 9006, HB3, HB2, HB4)

Contents

Infitary LED Car Headlights User Manual

Model: H1, H4, H7, H11, 9005, 9006, HB3, HB2, HB4

1. Product Overview

The Infitary LED Car Headlights are designed to provide superior illumination and durability for a wide range of vehicles. Featuring advanced LED technology, these headlights offer enhanced brightness, energy efficiency, and a long lifespan.

Infitary LED Headlights with packaging

Figure 1: Infitary LED Headlights and packaging.

Key Features:

  • High Brightness: Utilizes imported LED chips, offering brightness several times higher than traditional halogen lamps.
  • Energy Saving & Environmental Protection: Significantly lower power consumption and a lifespan several times longer than traditional halogen lamps.
  • Plug and Play: Compatible with the original vehicle circuit, eliminating the need for circuit modification. (Note: Some vehicle models may require a decoder).
  • Optimal Light Concentration: Designed for good light concentration, preventing stray or blinding light to enhance driving safety.
  • CANBUS Error Free: External dual driver design ensures no error messages, no radio interference, and no flickering.
External Dual Driver Design CANBUS Error Free

Figure 2: CANBUS Error Free design, preventing common issues like error messages, radio interference, and flickering.

2. Specifications

Attribute Specification
Wattage 110W/Pair
Waterproof Rating IP68
Voltage 12V / 24V (Wide Voltage Design)
Lumen 30000LM
Color Temperature 6500K Cool White
Operating Life 50000 Hours
Light Source CSP 3570 Chip
Material Aviation Aluminum 6063
Operating Temperature -60℃~+160℃
Heat Dissipation Aviation Aluminum 6063 + Cooling Fan
Installation Type Play and Plug
Certification CE
Anti Radio Interference Yes
Compatible Car Brands Most car models
Package Included 2*LED Headlight Bulbs, 1*Installation Manual

Attention: This product does not apply to BMW X3.

12-72v wide voltage design for various vehicles

Figure 3: Wide voltage design (12-72V) suitable for 24V trucks, engineering vehicles, and 12V private cars.

Detailed dimensions for H7, H4, H11, H1, 9005, 9006 bulb types

Figure 4: Detailed dimensions for various bulb types (H7, H4, H11, H1, 9005, 9006).

3. Installation Guide

This section provides detailed instructions for installing your Infitary LED Headlights. Please read all precautions before beginning the installation process.

General Installation Steps:

  1. Turn off Vehicle Power: Ensure the vehicle's power is off and the headlights have cooled down before starting.
  2. Dismantle Old Lights: Open the engine compartment, locate the rear cover of the headlights, turn it counter-clockwise, and remove the original car light bulb.
  3. Install LED Light: Insert the LED light into the original light socket. Pay close attention to the positive and negative directions, ensuring the buckle is securely in place.
  4. Debug Lighting: After powering on, check if the lighting is normal and adjust the lens angle to meet the regulatory illumination range (low beam tangent level).

Specific Installation Diagrams:

The installation process may vary slightly depending on your specific bulb type. Refer to the diagrams below for detailed steps.

For Type: H11 / 9005 / 9006 / 9012 / 880

  1. Open the front cover of the vehicle and prepare to install the LED headlights.
  2. Find the original car bulb. Unscrew it.
  3. Remove the original car bulb.
  4. Place the LED bulb in its original position.
  5. Twist the LED bulb until it fits and is secure.
  6. Connect the power supply and test if it works properly.
Installation Diagram for H11, 9005, 9006, 9012, 880 bulb types

Figure 5: Step-by-step installation for H11, 9005, 9006, 9012, and 880 bulb types.

For Type: H1 / H3 / H4 / H7 / H13 / 9004 / 9007

  1. Open the front cover of the vehicle and prepare to install the LED headlights.
  2. Find the original bulb location.
  3. Open the spring clip, take out the original bulb and chuck.
  4. Install on the new chuck.
  5. Press the spring clip and make it firm.
  6. Aim at the chuck slot, put the bulb into the chuck.
  7. Notice the chuck slot, make it match with the convex position.
  8. Rotate slightly and make the bayonet fixed.
  9. Connect the power supply and test if it works properly.
Installation Diagram for H1, H3, H4, H7, H13, 9004, 9007 bulb types

Figure 6: Step-by-step installation for H1, H3, H4, H7, H13, 9004, and 9007 bulb types.

Installation Precautions:

  • Put the vehicle into park or make sure it is securely in gear.
  • Make sure to have the ignition turned off and the keys removed.
  • Be careful to avoid burns, especially when turning on or off the vehicle's lighting.
  • Do not touch the lamp bead with your fingers to avoid staining or damage. Do not press the fan to avoid damage to the fan.
  • Pay attention to the positive and negative connections. Fully examine the connection of contact points, ports, and wires, as faulty connections can cause lighting problems.
  • Ensure that the end of the bulb does not come into contact with the interior light shield of the headlight when adjusting the bulb. The wires of the lights should be facing down.
  • It is best to install a dust cover to prevent dust from affecting the headlights' service life.
  • If the light does not work after installation, try reversing the plug 180° and reconnecting.
Visual guide for installation precautions

Figure 7: Visual guide illustrating installation precautions, including proper handling and wire orientation.

4. Operating & Maintenance

Usage Recommendations:

  • Avoid prolonged continuous lighting. Intermittent shutdown is recommended if usage exceeds 4 hours.
  • Check the cooling fan for dust accumulation every 6 months to ensure optimal heat dissipation.
  • In case of flickering or extinguishing, prioritize checking if the vehicle voltage is stable at the appropriate standard voltage (12V or 24V).

Heat Dissipation & Durability:

The headlights feature a multi-faceted heat dissipation system, including a high thermal conductivity copper substrate and a powerful 12,000 RPM turbofan, ensuring a lifespan of over 50,000 hours.

Multi-Faceted Heat Dissipation system

Figure 8: Multi-faceted heat dissipation system for extended lifespan.

Efficient Cooling System diagram

Figure 9: Diagram of the efficient cooling system with aviation-grade aluminum and turbofan.

5. Troubleshooting

  • Flickering or Error Messages: If the headlights are flickering or displaying error messages, it may be caused by a current difference. Since these energy-efficient LED headlights require less current than traditional halogen or xenon headlamps, you may need to install a pair of decoders (CANBUS decoders) to resolve the issue.
  • Improper Fit: Ensure you have chosen the correct socket type for your vehicle. If the bulb retainer doesn't fit, please contact support.
  • Dust Cap Cover Issues: The flat dust cap cover may not fit. Always use a dust cap cover to protect the headlights from water and dust. If the fan is covered with dust, it will stop rotating for heat dissipation, causing the bulbs to overheat and burn out easily.
  • No Light After Installation: If the light does not work after installation, try reversing the plug 180° and reconnecting it.
Warm Tips regarding dust cap covers and bulb fit

Figure 10: Visual guide for warm tips on dust cap covers and bulb fitment.

6. User Tips

  • Before purchasing, double-check your vehicle's bulb type and ensure compatibility. If unsure, consult your car's manual or contact Infitary support with your car information.
  • Always handle the LED bulbs by their base to avoid touching the LED chips, which can cause damage or reduce performance.
  • Regularly inspect your headlights for any signs of dust accumulation on the cooling fan, especially if driving in dusty environments.
  • If you experience any issues, remember to check the vehicle's voltage stability as a first step.

7. Warranty & Support

This product comes with a 1-year warranty from the date of purchase.

For any questions, technical support, or warranty claims, please contact Infitary customer service. You can also refer to the official user manual PDF for additional details: View User Manual (PDF).

8. Product Demonstration Video

Watch this video for a demonstration of the Infitary LED Headlights' performance and durability tests, including anti-frozen, high-temperature, and waterproof tests, as well as a quick installation overview.

Video 1: Infitary LED Headlight demonstration and durability tests.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.