CNSPEED 60mm Water Temperature Gauge

Contents

CNSPEED 60mm Water Temperature Gauge Instruction Manual

Model: 60mm Water Temperature Gauge

Brand: CNSPEED

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your CNSPEED 60mm Water Temperature Gauge. Designed for all 12-volt automotive applications, this gauge accurately monitors your engine's water temperature, helping to prevent overheating and ensure optimal engine performance. Please read this manual thoroughly before installation and use.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1 x Water Temperature Meter (60mm diameter, 20-120 degrees Celsius range)
  • 1 x Water Temperature Sensor (1/8 NPT size)
  • 1 x Water Temperature Sensor Adapter (available in various sizes: 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm)
  • 2 x Clamps for adapter
  • 1 x Power Cord (length: 54cm)
  • 1 x Signal Wires (length: 180cm)
  • 1 x Power Series Line (length: 19.5cm)
  • 2 x Screws
  • 1 x Rubber Ring
  • 1 x Instrument Cover Ring
  • 1 x English Manual
CNSPEED 60mm Water Temperature Gauge and included components
Image 2.1: Water Temperature Gauge and all included accessories.
List of package contents as described in the manual
Image 2.2: Detailed list of package contents.

3. Specifications

Feature Specification
Condition 100% New
Power DC 12V (Professional)
Gauge Diameter 60mm (2.5 inches)
Temperature Range 20-120 degrees Celsius
Backlight Colors White / Red
Water Sensor Size 1/8 NPT
Universal Fitment All 12-volt cars
Material Aluminium (for adapter), ABS Plastic (for gauge)
Item Weight 0.55kg
Item Dimensions (L x W x H) 60mm x 60mm x 60mm (Gauge body)
Adapter Length 68mm (2.67 inches)
Manufacturer Part Number Water Temp Sensor adapter
Interchange Part Number YC101349+YC100345-OD28BL
Dimensions of the 60mm water temperature gauge
Image 3.1: Gauge dimensions (71mm front diameter, 62mm depth, 65mm height with bracket).
Dimensions of the water temperature sensor adapter with 1/8 NPT port
Image 3.2: Water temperature sensor adapter dimensions (68mm length) and available pipe diameters (28mm to 42mm).
Features of the water temperature gauge including range, insulation, material, and backlight colors
Image 3.3: Key features of the gauge: 20-120°C range, plastic insulated dial, ABS plastic material, white and red dial colors.

4. Setup and Installation

Important: Installation should ideally be performed by a qualified professional. Disconnect the vehicle's battery before starting any electrical work.

4.1. Water Temperature Sensor Adapter Installation

  1. Choose the correct size water temperature sensor adapter (28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, or 42mm) that matches your vehicle's radiator hose diameter.
  2. Locate a suitable section of the radiator hose where the adapter can be securely installed.
  3. Carefully cut the radiator hose and insert the aluminum adapter.
  4. Secure the adapter in place using the provided clamps. Ensure a tight fit to prevent leaks.
  5. Thread the 1/8 NPT water temperature sensor into the adapter's port.
Various sizes of water temperature sensor adapters and an example of installation on a radiator hose
Image 4.1: Selection of adapter sizes and an example of adapter installation on a hose.

4.2. Gauge Mounting

  1. Select a suitable location on your dashboard or A-pillar for mounting the gauge.
  2. Use the provided mounting bracket and screws to securely attach the gauge.
Mounting kit components for the gauge
Image 4.2: Mounting kit components including bracket and screws.

4.3. Wiring Connections

The gauge requires a DC 12V power supply. Refer to the included English Manual for specific wiring diagrams. General connections typically include:

  • Power (Red wire): Connect to a switched 12V power source (e.g., ignition).
  • Ground (Black wire): Connect to a reliable chassis ground.
  • Illumination (Orange/White wire): Connect to your vehicle's dash light circuit for backlight control.
  • Sensor Input (Green/Blue wire): Connect to the water temperature sensor.
Rear view of multiple gauges showing power series line connections
Image 4.3: Rear view of gauges illustrating power series line connections.

5. Operating Instructions

Once properly installed and wired, the CNSPEED Water Temperature Gauge will display your engine's coolant temperature in Celsius. The gauge operates within a range of 20-120 degrees Celsius.

  • Power On: The gauge will illuminate and display the temperature when the vehicle's ignition is turned on.
  • Backlight: The gauge features a white and red backlight. The specific control mechanism (e.g., switch, automatic) for changing between these colors should be detailed in the included English Manual.
  • Alarm Function: This gauge may include an adjustable alarm function, typically indicated by a 'PEAK' or 'WARNING' light. Refer to the detailed English Manual for instructions on how to set or adjust the alarm threshold.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the gauge face and body. Avoid abrasive cleaners or solvents that could damage the plastic or finish.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Sensor and Adapter: Inspect the water temperature sensor and adapter for any signs of leaks or damage. Ensure the clamps are tight.

7. Troubleshooting

7.1. Gauge Not Powering On

  • Check the 12V power connection (red wire) for proper voltage.
  • Verify the ground connection (black wire) is secure.
  • Inspect the fuse in the vehicle's circuit, if applicable.

7.2. Incorrect Temperature Reading

  • Ensure the water temperature sensor is correctly installed in the adapter and making good contact with the coolant.
  • Check the sensor wiring (green/blue wire) for continuity and proper connection.
  • Verify the sensor adapter is the correct size for your radiator hose and is not leaking.

7.3. Alarm Triggering at Unwanted Temperature

The gauge features an adjustable alarm. If the alarm is triggering at an undesired temperature (e.g., 90°C instead of 100°C), you will need to adjust its setting. Refer to the specific instructions in the included English Manual for how to enter the alarm setting mode and modify the temperature threshold.

8. User Tips

  • Adapter Size: Always double-check your vehicle's radiator hose diameter before selecting an adapter size to ensure a perfect fit and prevent leaks.
  • Alarm Customization: Take advantage of the adjustable alarm feature to set a warning threshold that is appropriate for your vehicle's normal operating temperature and your personal preference.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official CNSPEED documentation or contact your retailer. A comprehensive user manual in PDF format is available for download or viewing online. You can access the User Manual (PDF) via the following link: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.