hohem HRT-03

Contents

hohem HRT-03 Wireless BT Remote Control User Manual

For hohem iSteady XE/X2/V2/V2s/M5/M6/MT2/Q/Pro 4/Mobile+ Smartphone Gimbal Stabilizers

1. Introduction

The hohem HRT-03 Wireless BT Remote Control is designed to enhance your experience with compatible hohem iSteady smartphone gimbal stabilizers. This compact and lightweight remote allows for convenient wireless control of your gimbal's functions from a distance, providing greater flexibility in capturing your desired shots. Please read this manual carefully to ensure proper setup and operation.

Hohem HRT-03 Remote Control in black and white
Figure 1: Hohem HRT-03 Remote Control (Black and White versions)

2. Product Overview

The HRT-03 remote control features an intuitive button layout for easy access to various gimbal functions.

Hohem HRT-03 Remote Control button layout
Figure 2: Top view of the Hohem HRT-03 Remote Control, highlighting button functions.

2.1 Button Functions

  • Power Button (Top Left): Turns the remote control on/off.
  • Directional Arrows (Up, Down, Left, Right): Controls gimbal movement (pan, tilt).
  • 'M' Button (Center): Mode switch for different gimbal operating modes.
  • '+' and '-' Buttons (Top Right & Bottom Center): Typically used for zoom in/out or focus control.
  • Camera/Video Button (Bottom Left): Toggles between photo and video recording modes, or triggers capture.
  • Heart Button (Center of directional pad): Often a customizable function button or for marking favorites.
  • Indicator Light: Provides status feedback (e.g., pairing, battery).

3. Setup

3.1 Initial Pairing

  1. Ensure your hohem iSteady gimbal stabilizer is powered on first.
  2. Power on the HRT-03 remote control by pressing and holding the Power Button.
  3. The remote control will automatically attempt to pair with the nearest compatible hohem gimbal. The indicator light will show pairing status (e.g., blinking rapidly during pairing, solid once connected).
  4. If pairing does not occur automatically, refer to your specific gimbal's manual for its Bluetooth pairing mode instructions. You may need to initiate pairing from the gimbal's side.

Important Note: Always turn on the gimbal BEFORE turning on the remote control. If the remote is turned on first, it may not pair correctly with the gimbal.

4. Operating Instructions

Once successfully paired, you can use the HRT-03 remote control to operate your hohem iSteady gimbal.

4.1 Basic Controls

  • Gimbal Movement: Use the directional arrows to control the pan and tilt axes of your gimbal.
  • Mode Switching: Press the 'M' button to cycle through different gimbal modes (e.g., Pan Follow, Pan & Tilt Follow, All Lock). Refer to your gimbal's manual for detailed descriptions of each mode.
  • Zoom/Focus: Use the '+' and '-' buttons to adjust the zoom level or focus within your smartphone's camera app, if supported by the gimbal and app.
  • Photo/Video Capture: Press the Camera/Video button to take a photo or start/stop video recording.
  • Custom Function: The Heart button may be assigned a custom function via the hohem gimbal app. Consult the app settings for customization options.

4.2 Wireless Range

The remote control offers a transmission distance of up to 10 meters (approximately 33 feet) in an open, interference-free environment. Performance may vary based on obstacles, electromagnetic interference, and battery levels.

5. Maintenance

  • Keep the remote control dry. Do not expose it to moisture or liquids.
  • Clean the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
  • If the remote is not used for an extended period, ensure it is powered off to conserve battery life.

6. Troubleshooting

ProblemPossible CauseSolution
Remote control does not pair with gimbal.Gimbal was not turned on first; remote is out of range; low battery; interference.
  • Ensure gimbal is powered on before the remote.
  • Move the remote closer to the gimbal.
  • Check remote battery and replace if necessary.
  • Restart both the gimbal and the remote control.
  • Check gimbal's manual for specific pairing instructions.
Limited control range or intermittent connection.Obstacles between remote and gimbal; electromagnetic interference; low battery.
  • Reduce distance between remote and gimbal.
  • Ensure a clear line of sight.
  • Avoid environments with strong electromagnetic signals.
  • Check remote battery.
Buttons are unresponsive.Remote is not paired; low battery; remote is off.
  • Verify successful pairing (indicator light).
  • Check remote battery and replace if necessary.
  • Ensure the remote is powered on.

7. Specifications

FeatureDetail
Model Numberhohem HRT-03
Compatible Gimbal Modelshohem iSteady XE/X2/V2/V2s/M5/M6/MT2/Q/Pro 4/Mobile+ Smartphone Gimbal Stabilizer
Compatible Gimbal Brandhohem
Accessory TypeGimbal Controller
Brand NameArealer (also hohem)
OriginMainland China
Weight10.5g / 0.37oz
Transmission DistanceUp to 10 meters (33 feet)
PackageYes
Color OptionsBlack, White

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or the manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.