1. Important Cautions
Please read all instructions carefully before using this product. Failure to comply with these instructions may result in injury, product damage, or property damage.
1.1. Safety Warnings
WARNING: This symbol indicates critical instructions. Failure to follow these may lead to injury, death, damage to the product, and/or property.
CAUTION: This symbol indicates important instructions. Failure to follow these may result in injury or damage to the product and/or property.
1.2. Installation Precautions
- Self-installation is not recommended. It is advised to have the unit professionally installed by a certified professional.
- Do not attempt to install or service this product yourself without professional training and experience. This can be hazardous and may pose risks of electric shock, injury, or other hazards.
- Before installation, disconnect the negative (-) battery cable to prevent potential electrical shorts.
- Use this unit exclusively with a 12-volt battery and negative grounding. Failure to do so could lead to fire or malfunction.
1.3. Product Safety
- Viewing video content while the vehicle is in motion is prohibited by law. This product is designed to be used with a parking brake safety feature, which is necessary for viewing video content.
- The video cannot be viewed without the proper parking brake powered connection. Tampering with or disabling this safety feature will invalidate any existing warranty.
1.4. Trademarks
- Apple CarPlay: Use of the Apple CarPlay logo indicates that a vehicle user interface meets Apple performance standards. Apple is not responsible for the operation or compliance of this product with safety and regulatory standards. iPhone is a trademark of Apple Inc.
- Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
2. Product Features
The Hippcron 7-inch Car Radio Multimedia Video Player offers a range of features designed to enhance your in-car entertainment and connectivity:
- Connectivity: Support for wired USB & WiFi Car-play and Android Auto, allowing seamless synchronization with Apple and Android mobile phones.
- Display: 7-inch HD Touchscreen with 1024*600 resolution, supporting CID (Center Information Display) / RSE (Rear Seat Entertainment) Dual display.
- Charging: USB BC1.2 for smartphone fast charging.
- Multimedia: 1080P full HD multimedia decoder, supporting USB disk and TF card playback for various video, audio, and picture formats.
- Audio Output: Multiple options including FM transmitting to original car radio, AUX cable connection, and a built-in speaker.
- Bluetooth: Bluetooth 5.1 for faster transmission speeds, low latency, stable connection, hands-free calls, and music streaming.
- Radio: Built-in FM Radio Tuner with FM transmitting capability.
- Camera Support: Optional 720P AHD Night Vision Backup Camera support (CVBS Rearview Camera only).
- Vehicle Compatibility: Suitable for 12V~24V vehicles, universal fit for most car models.
- User Interface: User-friendly Digital Control Interface with EQ Audio Setting, Multiple Language Settings, and Date and Time Setting.
- Adjustability: 360-degree screen adjustment direction for optimal viewing without blocking your view.
- Power: Lighter socket powered for easy plug-and-play installation.
3. Setup Guide
3.1. Package Contents
Before starting, ensure all items are present in the package:

3.2. Product Overview and Connections
Familiarize yourself with the unit's ports and buttons:


3.3. Mounting the Unit
- Insert the adhesive suction cup mount into the bracket on the back of the main unit and slide it up to lock it in place.
- Remove the protective film from the adhesive suction cup on the bottom of the mount.
- Press the suction cup onto your dashboard and push the lock down to secure it.
- Adjust the unit display angle and height to ensure it does not block your view of the road, then tighten the knob to secure it.

3.4. Power Connection
- Connect one end of the supplied power cable (Type-C) to the DC 12V power port of the device.
- Plug the adapter end of the power cable into your car's DC 12V power outlet (cigarette lighter).

3.5. Optional Reverse Camera Setup
If you have purchased the optional reverse camera:
- Connect the camera's AV IN cable to the 'Camera input' port on the main unit.
- Connect the camera's power cable (positive) to the car's reverse lights (+12V).
- Connect the camera's ground wire (negative) to a suitable ground point (GND).

4. Operating Instructions
4.1. Home Menu Navigation
The home menu allows access to various functions. Scroll left/right at the bottom of the screen to navigate between pages. Apps displayed may vary depending on the connected phone.
4.2. Main Functions
- FM TX: FM transmit function (does not support FM radio reception directly).
- USB: Read information from a USB flash drive.
- TF: Read information from a TF card.
- PhoneLink: Access Carplay, Android Auto, and Mirror Link functions.
- BT: Connect to Bluetooth devices for wireless functions.
- Clock: Time setup.
- Calendar: View calendar.
- Setup: Access system settings.
- AV IN: View input from the front camera (if connected).
- Calculator: Basic calculator function.
4.3. Connecting Carplay & Android Auto
The unit supports both wired and wireless connections for Apple CarPlay and Android Auto.

4.3.1. Wireless CarPlay Connection (iPhone)
- Connect your iPhone's Bluetooth to the device's Bluetooth.
- Upon first pairing, your phone will prompt to 'Use CarPlay'. Select 'Use CarPlay' to confirm.
- To return to the homepage, click 'CarHome'.
4.3.2. Wired CarPlay Connection (iPhone)
Connect your iPhone to the USB port using an original Apple or certified cable.
4.3.3. Wireless Android Auto Connection (Android)
- Pair your mobile phone's Bluetooth with the device's.
- Confirm to use Android Auto. It will automatically connect next time.
- To disconnect, turn off the car stereo's Wi-Fi.
- To return to the homepage, click 'CarHome'.
4.3.4. Wired Android Auto Connection (Android)
Connect your phone to the USB port using an original Android or certified cable.
4.4. Mirror Link (AirPlay)
Mirror Link allows you to display your phone's screen on the unit.
4.4.1. Wired Mirror Link (iPhone/Android)
Connect your phone to the device using an original cable. When prompted, choose 'trust' on your phone to enjoy the full HD display of video or images.

4.5. Audio Output Methods
You can transfer sound to your car's speakers or use the unit's built-in speaker.

4.5.1. FM Radio Transmitter
- Choose an unused FM frequency on the portable MP5 player (e.g., FM 93.6 MHz). Avoid frequencies used by local broadcast stations to prevent interference.
- Tune your original car radio to the same FM frequency.
- The audio from the portable MP5 player will now play through your car's speakers.

4.5.2. AUX Cable Connection
If your car has an AUX input, plug one end of an AUX cable (not included) into the unit's AUX in port and the other end into your car's AUX port.
4.5.3. Built-in Speaker
When the FM function is turned off, the unit's built-in speaker will provide audio output.
4.6. Multimedia Playback
The unit supports playback from USB disks and TF cards.

4.6.1. Play Interface
When playing media from a USB disk or TF card, you can:
- Set the file playback mode (Repeat single, repeat single chapter, all repeat, random play).
- Click to enter the media playlist to select music.
- Use the Previous Song, Next Song, Play/Pause buttons.
- Access EQ settings to adjust sound effects.
4.7. Bluetooth 5.1 Music/Call
Connect your phone via Bluetooth for hands-free calls and music streaming.

4.7.1. BT Phone Interface
From the Main Menu, enter the BT dialing interface to make calls.
4.8. Settings Overview
Access the 'Setup' menu for various configurations:
- Basic Setup: Configure beep sounds, reverse mute, color lamp mode.
- Factory Set: Input password 779822 to access advanced settings.
- Sound Setup: Choose different audio modes.
- Display Setup: Adjust screen brightness.
- Background: Change wallpaper.
- ScreenSave: Configure screen saver.
- Language: Select display language (English, Chinese, Spanish, etc.).
- Time Setup: Adjust date and time.
- Version: View basic information about your unit.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid abrasive cleaners or solvents.
- Temperature: Operate the unit within normal vehicle operating temperatures. Avoid extreme heat or cold.
- Storage: If storing the unit for an extended period, disconnect it from power and store in a cool, dry place.
6. Troubleshooting
6.1. Common Issues and Solutions
- Unit not powering on or charging:
- Ensure the DC 12V power cable is securely connected to both the unit and the car's power outlet. Check the car's cigarette lighter fuse if necessary.
- Bluetooth connection issues (e.g., device name disappeared, unable to connect):
- Try restarting both the unit and your phone. Delete the device from your phone's Bluetooth settings and re-pair. If the issue persists, a factory reset might be necessary (see Settings Overview for password).
- Reverse camera image not displayed:
- Verify all camera wiring connections (power, ground, video input) are correct and secure. Ensure the camera is a CVBS type, as only CVBS cameras are supported.
- No audio through car speakers (only built-in speaker):
- If using FM transmission, ensure the unit and car radio are tuned to the exact same, unused FM frequency. If using AUX, ensure the AUX cable is connected correctly to both the unit and the car's AUX input, and the car stereo is set to AUX mode.
- Factory Set password not working:
- The standard factory password is 779822. Double-check the input. If it still doesn't work, consult the full user manual PDF for alternative codes or contact support.
- Cannot transmit FM below 87.0 MHz:
- The unit's FM transmitter operates within a specific frequency range, typically starting from 87.5 MHz. Frequencies below this may not be supported.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | XSP-2 |
| Brand Name | hippcron |
| Display Size | 7 inch |
| Resolution | 1024*600 |
| Voltage | 12 V (compatible with 12V-24V vehicles) |
| Item Weight | 0.6 kg |
| Item Dimensions (approx.) | 177mm (W) x 108mm (H) x 26mm (D) |
| Material | Plastic + Glass |
| Certification | CE |
| Radio Response Bandwidth | FM Transmitting |
| Out Power | Built-in speaker |
| Special Features | Radio Tuner, Carplay, Android Auto, Mirror Link, Bluetooth 5.1, USB/TF card playback, AUX In, AV In (for camera) |
| OSD Language | English (Multiple language settings available) |
8. User Tips
- Factory Password: The default factory password is 779822. This is useful for accessing advanced settings.
- Audio Output without AUX: If your car lacks an AUX input, you can still get audio through your car's speakers by using the FM transmitter function. Alternatively, the unit has a built-in speaker.
- Touch Screen: All models of this unit feature a touch screen for easy interaction.
- Power Source: The unit does not have an internal battery and requires a constant 12V power supply, typically provided via the car's cigarette lighter socket. USB ports are primarily for data transfer and phone charging.
- Rear Camera Compatibility: If you plan to add a rear camera, ensure it is a CVBS type, as this unit only supports CVBS rearview cameras.
9. Warranty & Support
For detailed warranty information, troubleshooting guides, and further technical support, please refer to the official user manual PDF:
If you encounter any difficulties during installation or operation, please do not hesitate to contact customer service for assistance.