Introduction
This manual provides detailed instructions for the TKSTAR TK905 4G GPS Tracker. It covers device specifications, hardware description, setup, operation, and troubleshooting. Please read this manual carefully to ensure proper use and to maximize the device's functionality.
The TKSTAR TK905 is a 4G GPS Tracker designed for vehicle tracking, operating on existing 4G LTE networks and GPS satellites. It offers remote monitoring via SMS, mobile app, and web tracking software. Featuring advanced GPS, LBS, and Wi-Fi positioning, along with a powerful built-in magnet, it can be easily installed on various targets with metal surfaces.
Video: Unboxing and initial overview of the TKSTAR TK905 GPS Tracker, showing contents like the device, user manual, charging cable, and SIM card adapters.
Specifications
The TKSTAR TK905 series GPS trackers offer robust performance and features for reliable tracking. Below are the detailed specifications for models TK905 and TK905B.
| Content | Specs. |
|---|---|
| Dimensions (TK905) | 90mm x 72mm x 22mm (3.5" x 2.8" x 0.8") |
| Dimensions (TK905B) | 90mm x 72mm x 32mm (3.5" x 2.8" x 1.26") |
| Net Weight (TK905) | 168g |
| Net Weight (TK905B) | 235g |
| Network (2G) | GSM: 850/900/1800/1900MHz |
| Network (4G Europe/Middle East/Africa/Asia) | LTE-FDD: B1/B3/B7/B8/B20/B28; LTE-TDD: B38/B40/B41; WCDMA: B1/B8; GSM: B3/B8 |
| Network (4G South America/New Zealand/Australia) | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28; LTE-TDD: B40; WCDMA: B1/B2/B5/B8; GSM: B2/B3/B5/B8 |
| Network (4G North America) | LTE-FDD: B2/B4/B12; WCDMA: B2/B4/B5 |
| Network (4G Japan) | LTE-FDD: B1/B3/B8/B18/B19/B26; LTE-TDD: B41; WCDMA: B1/B6/B8/B19 |
| GPS Sensitivity | -159dBm |
| GPS Accuracy | 5m |
| Charging Input | DC 5V == 1.0A |
| Battery (TK905) | Rechargeable 3.7V 5000mAh Li-ion battery |
| Battery (TK905B) | Rechargeable 3.7V 10000mAh Li-ion battery |
| Charging Period (TK905) | 8-10 hours |
| Charging Period (TK905B) | 16-20 hours |
| Standby (2G TK905) | 90 days |
| Standby (2G TK905B) | 150 days |
| Standby (4G TK905) | 60 days |
| Standby (4G TK905B) | 100 days |
| Time To First Fix (Cold status) | 45s |
| Time To First Fix (Warm status) | 35s |
| Time To First Fix (Hot status) | 1s |
| Storage Temperature | -40°C to +85°C |
| Operation Temperature | -20°C to +55°C |
| Humidity | 5%–95% non-condensing |
| Special Features | Waterproof IP65, Powerful Magnetic |
| GPS Module | Yes |
| Screen Size | No screen |
| Certification | CE, FCC |
Hardware Description
The TKSTAR TK905 GPS tracker features a compact design with essential ports and indicators for easy operation.

- USB port
- Indicator light
- SIM card slot
- Lanyard hole
- Strong Magnet
Indicator Light Status
| Indicator Light Status | Meaning |
|---|---|
| Yellow light - Solid | No GPRS signal |
| Yellow light - Flash | GPRS connection |
| Blue light - Solid | No GPS signal |
| Blue light - Flash | GPS connection |
Setup Guide
1. SIM Card Installation
The TK905 tracker requires a Normal SIM card (Standard SIM card) for operation. Ensure the SIM card is registered and topped up with credit before insertion.

- Open the rubber cover and insert the SIM card chip into the slot.
- The indicator light will turn on when the SIM card is inserted.
- The device automatically turns off when the SIM card is removed.
Note:
- If you have a Nano/Micro SIM card, you will need to use an adapter to fit it.
- Remember your SIM card number.
- Make a note of your GPS SIM card number.
- GPS ONLY works outdoors.
- Make sure the SIM Card's PIN code is deactivated.
- Make sure call forwarding is not active.
2. Charging the Device
Before first use, fully charge your GPS tracker using the provided USB cable.
- Connect the USB cable to the device's USB port and a 5V/1.0A power source.
- The red light on the device indicates that the battery is charging.
- Once the battery is fully charged, the red light will disappear.
Note: Do not use a fast charger. This can damage the battery.
3. Initial APN Setting (for online tracking)
For online tracking via the app or web platform, the APN (Access Point Name) must be correctly set. If the SIM card is correctly inserted and the device is online on the APP, you may not need to send these commands. Otherwise, follow these steps:
Every SIM card carrier has its own APN content. You can find the APN content by checking your SIM card carrier's website or by inserting the SIM card into a cell phone to find the APN settings.
Send SMS commands to set the APN. The commands are structured as "command123456 content". There is a small blank space after "123456" in every command.
| Instruction | Command | Reply |
|---|---|---|
| Set APN (any existing will be replaced) | apn123456 [apn content] | apn ok |
| Set APN username | apnuser123456 [content] | apnuser ok |
| Set APN password | apnpasswd123456 [content] | apnpasswd ok |
After successful APN setting, remove and re-insert the SIM card to reboot the device.
Example for SpeedTalk SIM card (US):
- APN: Mobilenet
- APN username: (none)
- APN password: (none)
Send SMS: apn123456 mobilenet
Once you receive "apn ok", remove and re-insert the SIM card to reboot the device.
Operation
1. Real-time Tracking
The TK905 allows real-time tracking via SMS, mobile app, and web platform.

SMS Tracking:
To receive a Google Maps link of the tracker's location, send an SMS message "G123456#" to the SIM card number in the tracker or call the SIM card number. You will receive a text message with a Google Maps link. Clicking the link will divert you to Google Maps, pinpointing the exact location.
lat:22.63952lon:114.17122Spd:002T:24/09/15 16:00bat:100%ID:2015070203https://maps.google.com/maps?q=+22.63952.+114.17122
Explanation of parameters:
- lat/lon: Latitude and longitude values for positioning.
- spd: Device moving speed in km/h.
- T: Real-time tracking time (default London time, adjustable in app).
- bat: Battery level (10%-100%). Alarms if below 20%.
- ID: Device ID number for app/platform login.
- Google maps link: Direct link to the tracker's position on Google Maps.
Example SMS Reply (LBS tracking, no GPS signal):
lac:27a4 1223T:24/09/15 15:17
Explanation of parameters:
- lac: Real-time LBS positioning data.
- T: LBS positioning time.
Mobile App & Web Platform Tracking:
The TK905 offers a lifetime free tracking software accessible via a web platform and mobile app (iOS/Android).

- Web Tracking Platform: Access at www.mytkstar.net. Select "Login by ID" on the bottom of the screen. Use the Device ID (found on the back of the cover) and password "123456".
- Mobile App: Search "WINNES GPS" in the Apple App Store or Google Play Store, or scan the QR code provided in the manual to install.

Login Options:
- Login by ID (Single Tracker): Select "Login by ID". Server: www.mytkstar.net. Use Device ID and password "123456".
- Login by Username (Multiple Trackers): If tracking multiple devices, click "Sign Up" on the app to register an account. Then select "Login by username". Server: www.mytkstar.net. Use your registered email as username and the password you set.
2. Key Features and Alarms
The TK905 offers a range of features to enhance security and tracking capabilities.

- GPS+LBS Double Positioning: The device uses GPS satellites for precise location (5-10m accuracy) when available. If GPS signal is weak, it switches to LBS (Location Based Service) with 100-2000m accuracy.
- History Route Playback: The app and web server store up to 6 months of tracking data, allowing you to review past routes.
- Long Standby Time: Built-in Li-ion battery provides extended standby and working times (refer to specifications table).
- Powerful Magnetic: Integrated strong magnets allow for easy and secure installation on metal surfaces.
- Waterproof IP65: Resistant to splashes, but not submersible.
- Overspeed Alarm: (Works only in continuous positioning mode) If the unit's speed exceeds a preset limit, it sends "speed alarm!" SMS to the admin number every 5 minutes.
Command to set:speed123456[speed limit](e.g.,speed123456070for 70km/h). Reply:speed ok.
Command to cancel:nospeed123456. Reply:nospeed ok. - Shock Alarm: After setting, keep the tracker stationary for 5 minutes for this function to activate. It sends "sensor alarm!" SMS to the admin number when shocked.
Command to set:shock123456. Reply:shock ok.
Command to cancel:noshock123456. Reply:noshock ok. - Movement Alarm: If the unit is immobile for 10 minutes, set the alarm with command "move+password". If the device then moves 500m, it sends "Move Alarm+Latitude and longitude" SMS to the authorized number.
- Geo-fence: Set a virtual boundary. The unit sends alarm information to the app and web server if it enters or exits this defined area.

Figure 7: Geo-fence functionality. - Sleep Mode for Saving Battery:
- Sleep by time mode: After this setting, the tracker works for 5 minutes after waking up, then returns to sleep. GPS shuts off, and GSM works in low consumption. SMS or calls can wake it up.
Command to set:sleep123456 time. Reply:sleep time ok. - Sleep by shock sensor mode: If no shock for 5 minutes, the tracker enters "sleep by shock" mode. GPS shuts off, and GSM works in low consumption. Vibration, SMS, or calls can wake it up.
Command to set:sleep123456 shock. Reply:sleep shock ok.
- Sleep by time mode: After this setting, the tracker works for 5 minutes after waking up, then returns to sleep. GPS shuts off, and GSM works in low consumption. SMS or calls can wake it up.
3. Admin Number Setting
After setting an admin number, all SMS operations to the device will only be processed from this number.
- Command:
admin123456 [phone number](Use your mobile phone number, not the SIM card number in the tracker). - Reply:
admin ok. - Example:
admin123456 00861326XXXXXX
When the unit triggers an over-speed, shake sensor, or low battery alarm, it will send an alert to the admin number.
- Admin number Canceling Command:
noadmin123456. - Reply:
noadmin ok.
4. Terminal (Local) Time Setting
The factory setting for the time zone is GMT 0.
- Command:
timezone123456 [local time zone]. - Reply:
time ok!. - Examples:
timezone123456 +1timezone123456 -1timezone123456 0
Note: This setting is used for changing the timezone in SMS positioning.
5. Reset Hardware
This command restores all settings to factory state, except for the APN setting.
- Command:
begin123456. - Reply:
begin ok.
Maintenance and Safety
1. Electromagnetic Compatibility
Avoid very strong magnetic fields (e.g., transformers) as they can cause variations in transmission, leading to malfunctions or damage to your TKSTAR GPS device.
2. Safety for Children and Vulnerable Individuals
This device is not intended for use by individuals (including children) with limited physical, sensory, or mental abilities, or lack of experience/knowledge, unless supervised by a responsible person or instructed on its use.
Note: Some regions have laws regarding location-based tracking. It is the owner's responsibility to comply with local laws and regulations. Always switch off the tracker before boarding an aircraft.
3. Disposal
Batteries are hazardous waste. Dispose of them in appropriate containers provided at commercial battery premises or local council waste disposal facilities. For the device itself, follow local provisions for disposal. Information can be obtained from your local council waste disposal facility.
Dispose of packaging according to type: cardboard to paper banks, plastics to recycling collections.
Troubleshooting (FAQ)
| Problem | Instructions/Solutions |
|---|---|
| Fail to turn it on | Please check if the battery is charged. |
| No GSM/WCDMA signal |
|
| No GPS signal | A more open view of the sky is recommended to ensure the device receives GPS signal normally. |
| No reply to SMS command | The command format might be wrong, or the SIM card balance is insufficient. Ensure the SIM card has sufficient balance, supports calls/SMS, GPRS network, and call forwarding is off. |
| SMS position OK, but cannot use APP/web platform | Check if the APN is correctly set. Find the correct APN content for your SIM card (refer to Setup Guide). |
| Platform position differs from actual position | If there's no uploading position time or GPS signal, call the device's phone number to receive the position message. If it shows LBS data (like Pic 2 in manual), it means no GPS signal. The position displayed is the last known GPS location. If it shows GPS data (like Pic 1 in manual), it means the device hasn't reached the uploading time. |
Notice: Do not assemble or disassemble the device without authorization.
User Tips
- For optimal GPS signal reception, ensure the tracker has a clear view of the sky. Avoid placing it in enclosed metal compartments.
- Regularly check the battery level via the app to ensure continuous tracking.
- When setting up alarms (overspeed, shock, movement), test them in a controlled environment to understand their behavior.
- If using the device in a new region, verify the correct 4G LTE band version and APN settings for that area.
- For long-term storage, ensure the device is fully charged and then powered off to preserve battery health.
Warranty and Support
1. Declaration of Conformity (CE RED Directive 2014/53/EU)
Juneo declares that the Winnes/TKMARS GPS Tracker (item no. TK905/TK905B) conforms to the fundamental requirements and other relevant provisions of directive 2014/53/EU.
The full text of the declaration of conformity can be viewed on their website: www.mytkstar.net/en/doc.html
The product is certified with CE and FCC.
