Qanba Q3 Obsidian MF-GV Silent Arcade Joystick Multifunction Edition User Manual

Introduction

Welcome to the user manual for your Qanba Q3 Obsidian MF-GV Silent Arcade Joystick Multifunction Edition. This guide will provide you with all the necessary information to set up, operate, maintain, and troubleshoot your arcade fighting stick, ensuring a seamless and enjoyable gaming experience. Please read this manual thoroughly before using the product.

Setup Instructions

Follow these steps to set up your Qanba Q3 Obsidian MF-GV arcade joystick.

1. Unboxing and Initial Inspection

Carefully remove the arcade joystick from its packaging.
Inspect the unit for any signs of damage.
Ensure all components listed in the packing list are present: Joystick, Octagonal gate, Manual.

2. Connecting to Your Device

The Qanba Q3 Obsidian MF-GV connects via a wired USB interface.

Locate the USB cable stored in the take-up box at the front of the joystick.
Plug the USB cable into an available USB port on your PC, gaming console (PS3/PS4), Smart TV, Android phone, or Tablet.
The device should automatically detect the joystick. Drivers may install automatically on PC.

Multi-platform one-click switching diagram — Figure 2: Multi-platform compatibility including Desktop, Notebook, Smart TV, Android phone, Tablet, and TV box.

3. Platform Selection

Use the compatibility switch located on the function panel to select the correct platform mode.

Rich Function Panel with compatibility switch — Figure 3: Function panel showing compatibility switch for D-Input, X-Input, Android, PC-X, and P3/P4 modes.

PC-X: For PC (X-Input mode).
P3/P4: For PlayStation 3 and PlayStation 4 consoles.
ADR: For Android devices.
D-Input: For PC (DirectInput mode) and other compatible devices.

4. DIY Art Panel Design

The joystick features a DIY art panel design, allowing for easy customization of the top artwork.

DIY Art Panel Design for easy picture replacement — Figure 4: Exploded view demonstrating the easy replacement of the art panel.

To replace the artwork:

Carefully remove the clear acrylic top panel.
Replace the existing artwork with your custom design.
Re-attach the clear acrylic top panel securely.

Operating Instructions

1. Basic Controls

The Qanba Q3 Obsidian MF-GV features a standard arcade layout with a joystick and eight main action buttons, along with additional function buttons.

Joystick: Used for directional input. The included octagonal gate can be installed for a different feel.
Action Buttons: Eight primary buttons (e.g., X, Y, A, B, R1, L1, R2, L2) for in-game actions.

Top-down view of Qanba Q3 Obsidian joystick layout — Figure 5: Top-down view of the Qanba Q3 Obsidian joystick, showing button layout.

2. Function Panel Buttons

The function panel (refer to Figure 3) includes several utility buttons:

BACK / SELECT: Typically used for menu navigation or specific in-game functions.
TURBO: Activates turbo functionality for selected buttons.
MODE: Switches between different joystick modes (e.g., D-Pad, Left Analog, Right Analog).
START: Standard start button.
LED: Controls the ambient lighting.
L3 / R3: Analog stick click functions.

3. Touchpad Function

The joystick includes a touchpad for easy system navigation and interaction, particularly useful on PlayStation consoles.

Touchpad function illustration — Figure 6: Illustration highlighting the touchpad functionality for system maneuverability.

4. Ambient Lighting

The Qanba Q3 Obsidian MF-GV features cool ambient lighting. Use the LED button on the function panel to toggle or adjust the lighting effects.

Cool ambient lighting feature — Figure 7: The joystick illuminated by its ambient lighting.

Maintenance

Proper maintenance will ensure the longevity and optimal performance of your arcade joystick.

1. Cleaning

Use a soft, dry cloth to wipe down the surface of the joystick and buttons.
For stubborn smudges, lightly dampen the cloth with water. Avoid harsh chemicals or abrasive cleaners.
Ensure no liquids enter the internal components.

2. Cable Management

Utilize the integrated take-up box for convenient cable storage when the joystick is not in use. This helps prevent cable damage and keeps your gaming area tidy.

Simple and practical take-up box for cable storage — Figure 8: The integrated cable storage compartment.

3. Button and Joystick Care

The QANBA Gravity KS Arcade Buttons and QANBA Gravity Silent Lever are designed for durability. Avoid excessive force when operating the joystick and buttons to prevent premature wear.

QANBA Gravity KS Arcade Buttons internal mechanism — Figure 9: Detailed view of the QANBA Gravity KS Arcade Buttons, highlighting their light-touch feel and durability.

Troubleshooting

If you encounter issues with your Qanba Q3 Obsidian MF-GV, refer to the following common problems and solutions.

1. Joystick Not Responding

Check USB Connection: Ensure the USB cable is securely plugged into both the joystick and your device. Try a different USB port.
Verify Platform Mode: Make sure the compatibility switch (Figure 3) is set to the correct mode for your gaming platform (PC-X, P3/P4, ADR, D-Input).
Restart Device: Sometimes, restarting your PC or console can resolve connectivity issues.
Test on Another Device: If possible, test the joystick on another compatible device to determine if the issue is with the joystick or the original device.

2. Buttons Not Working Correctly

Check for Stuck Buttons: Ensure no buttons are physically stuck or jammed.
Software Configuration: In some games or emulators, you may need to manually configure button mappings. Check the game's controller settings.
Turbo Mode: If a button is behaving erratically, check if Turbo mode is accidentally activated for that button.

3. Compatibility with PlayStation 5 (PS5)

While the Qanba Q3 Obsidian MF-GV is officially compatible with PS3 and PS4, direct compatibility with PS5 for all games may vary. For PS4 games played on PS5, the joystick should function correctly. For native PS5 games, compatibility depends on the game developer's support for legacy PS4 controllers. Qanba often releases firmware updates for newer console compatibility; check the official Qanba website for the latest information and firmware.

Specifications

Below are the technical specifications for the Qanba Q3 Obsidian MF-GV Silent Arcade Joystick Multifunction Edition.

Product Parameters table for Qanba Q3 Obsidian models — Figure 10: Product Parameters comparing Q3MF-GV and Q3MF-SL models.

Feature	Qanba Q3 Obsidian MF-GV (Silent Multifunction Edition)
Product Name	Qanba Q3 Obsidian Arcade joystick Silent Multifunction Edition
Model	Q3MF-GV
Buttons	QANBA Gravity KS Buttons
Joystick	QANBA Gravity Silent Lever
Dimensions	461mm x 266mm x 121mm (18.1in x 10.4in x 4.8in)
Weight	3.0kg / 6.6lbs
Wired USB Cable Length	2.5m / 8.2ft
Product Color	Black
Interface Type	USB
Certification	CE
Packing List	Joystick, Octagonal gate, Manual

User Tips

Octagonal Gate Installation: For fighting games that benefit from precise diagonal inputs, consider installing the included octagonal gate. This can enhance control compared to the default square gate.
Platform Switching: Always ensure the platform switch is set correctly before launching a game to avoid input issues.
Firmware Updates: Periodically check the official Qanba website for any available firmware updates, especially if you encounter compatibility issues with new games or console updates.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Qanba website or contact your retailer. Keep your proof of purchase for warranty claims.

Frequently Asked Questions (FAQ)

Q: Is the Qanba Q3 Obsidian MF-GV compatible with PlayStation 5 (PS5)?: A: The joystick is officially compatible with PS3 and PS4. For PS5, it will work with PS4 games played on the PS5. For native PS5 games, compatibility depends on the game developer's support for legacy PS4 controllers. Please check the official Qanba website for the latest compatibility information and potential firmware updates.
Q: What platforms does this joystick support?: A: It supports PC (X-Input and D-Input), PlayStation 3, PlayStation 4, and Android devices. You can switch between these modes using the compatibility switch on the function panel.
Q: Can I customize the artwork on the joystick?: A: Yes, the Qanba Q3 Obsidian MF-GV features a DIY art panel design, allowing you to easily replace the top artwork with your own custom designs.

	Qanba D-lite Arcade Button Instruction Manual - DL-30 EL-24 Official instruction manual for the Qanba D-lite Series Arcade Button (models DL-30, EL-24). Learn about specifications, installation, usage, and maintenance for high-quality arcade gaming components.
	Qanba Drone 2 Arcade Joystick Instruction Manual Instruction manual for the Qanba Drone 2 Arcade Joystick, covering operating instructions, mode switch, turbo button functionality, mute button features, specifications, safety warnings, and compliance information.
	Qanba Gravity KT Arcade Button Instruction Manual Comprehensive guide for the Qanba Gravity KT Arcade Button, detailing its specifications, installation, usage, and maintenance. Features adjustable gravity for personalized gaming experiences.
	Qanba Obsidian 2 Arcade Joystick Instruction Manual Comprehensive instruction manual for the Qanba Obsidian 2 Arcade Joystick (Model: Q7), detailing operating instructions, features, specifications, and safety warnings for PlayStation 5/4 and PC use.
	Qanba Titan Arcade Joystick (B1) Instruction Manual Instruction manual for the Qanba Titan Arcade Joystick (Model B1), detailing features, operation, specifications, and safety warnings. Includes multilingual support for English, French, Spanish, German, and Italian.
	Qanba Titan Arcade Joystick Instruction Manual Comprehensive instruction manual for the Qanba Titan Arcade Joystick (Model: B1), detailing its features, operating instructions, and safety guidelines.