Yaheetech Height Adjustable Drafting Table User Manual

Introduction

This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your Yaheetech Height Adjustable Drafting Table. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

Product Features

• Adjustable Table Height: The table's overall dimensions are 47.4"L x 23.6"W, with a height adjustable from 27.4" to 36.4". Metal connectors and plastic knobs facilitate easy adjustments.
• Easy Angle Control: The main tabletop can be tilted from 0° to 60°, allowing it to function as a flat desk or a professional drafting table.
• Durable Pencil Ledge: An adjustable metal pencil ledge is attached to the front edge of the main tabletop to prevent items from sliding off when tilted.
• All-in-one Storage Options: Includes a detachable tabletop side tray with separate slots, a retractable board for documents, two nonwoven fabric drawers, and an extra metal shelf for supplies.
• Table/Stool Set: Comes with a matching stool featuring a sturdy metal frame and a black PU-wrapped sponge padded round seat.

Setup and Assembly

The Yaheetech Drafting Table requires assembly. Please ensure all parts are present before beginning. It is recommended to assemble the table on a soft, clean surface to prevent scratches.

Package Contents:

• Drafting Table components (frame, tabletops, drawers, storage accessories)
• Stool components
• Assembly hardware (screws, bolts, wrenches, etc.)
• Instruction manual (this document)

General Assembly Steps:

1. Unpack all components and verify against the parts list (refer to the separate parts list if provided with your product).
2. Assemble the main frame of the drafting table using the provided hardware. Ensure all connections are secure.
3. Attach the main tabletop and the side extension board to the frame.
4. Install the pencil ledge, side tray, retractable board, and nonwoven fabric drawers.
5. Assemble the stool by attaching the legs to the seat and securing the footrest ring.
6. Place the assembled table and stool in the desired location. Adjust the leveling feet on the table for stability.

Operating Instructions

Adjusting Table Height:

To adjust the table's overall height, loosen the plastic knobs on the table legs. Carefully raise or lower the tabletop to your desired working height (between 27.4" and 36.4"). Once the desired height is reached, securely tighten the knobs to lock the table in place.

Adjusting Tabletop Angle:

The main tabletop can be tilted from 0° (flat) to 60°. Locate the angle adjustment mechanism (as shown in the image below). Loosen the locking mechanism, adjust the tabletop to the desired angle, and then securely tighten the lock. Ensure the pencil ledge is properly engaged to prevent items from sliding off.

Using Storage Features:

• Side Tray: Use the detachable side tray for organizing pens, brushes, and other small stationary items. It can be easily removed for cleaning.
• Retractable Board: Pull out the retractable board located under the main tabletop to access additional space for documents, reference materials, or a small laptop.
• Fabric Drawers: Utilize the two nonwoven fabric drawers for storing mobile devices, notebooks, or other personal items.
• Bottom Shelf: The metal shelf below the drawers provides space for larger items like drawing pads, paint cans, or storage boxes.

Maintenance

Regular maintenance will prolong the life and appearance of your drafting table.

• Cleaning: Wipe down all surfaces with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by drying with a clean cloth. Avoid abrasive cleaners or harsh chemicals.
• Metal Parts: Periodically check all screws and bolts for tightness and re-tighten if necessary. This ensures stability and safety.
• Tabletop Surface: Protect the tabletop from sharp objects, excessive moisture, and direct heat to prevent damage.
• Stool: Clean the PU-wrapped seat with a damp cloth. Avoid prolonged exposure to direct sunlight to prevent material degradation.

Troubleshooting

If you encounter any issues with your drafting table, please refer to the following common problems and solutions:

• Table Wobbles:
  • Ensure all assembly screws and bolts are securely tightened.
  • Adjust the leveling feet at the bottom of the table legs to compensate for uneven floors.
• Tabletop Angle Adjustment is Stiff or Loose:
  • Check the locking mechanism for any obstructions.
  • Ensure the knobs or levers for angle adjustment are properly engaged or disengaged.
• Drawers Stick or Don't Slide Smoothly:
  • Check for any items obstructing the drawer's path.
  • Ensure the drawers are inserted correctly into their slots.

If problems persist, please contact customer support.

Specifications

Warranty and Support

Yaheetech is committed to providing high-quality products and customer satisfaction.

Return Policy:

• Free Returns: Enjoy free returns within 90 days of purchase.

Delivery Guarantee:

• Fast Delivery: We aim for fast delivery.
• Compensation for Delays: Collect a $1.00 coupon code if delivery is delayed.
• Refunds: Full refunds are provided if the package is lost or if items are damaged during transit. Refunds are also available if no delivery occurs within 60 days.

Customer Support:

For any questions, concerns, or assistance with assembly, operation, or warranty claims, please contact Yaheetech customer support through the retailer's platform or the official Yaheetech website. Please have your model number (1005007452856561) and purchase details ready.

Security & Privacy:

Your personal details are protected and not shared with third parties without your consent. We ensure secure payments and safeguard your privacy.