Introduction
The QYT KT-8900R is an upgraded Tri-Band Analog Mobile Ham Radio Base Station Kit designed for amateur radio enthusiasts. This compact and powerful transceiver offers stable communication over distant ranges, utilizing a Freescale power amplifier for enhanced performance. It supports tri-band operation, dual display, dual standby, and dual track functionalities.
The KT-8900R provides up to 25 watts VHF and 20 watts UHF output power in high mode. Key features include 200 programmable channels, CTCSS and DCS encoding/decoding, channel scanning, and DTMF technology. It also incorporates a Lone Worker mode, an emergency alarm, and VOX capability for hands-free operation.
The unit features an intuitive LCD display, programmable function keys on the console, and a hand microphone equipped with its own programmable keys, built-in LEDs, and a DTMF keypad. The QYT KT-8900R is repeater capable and compatible with a wide range of analog walkie-talkies and mobile ham radios.

Package Contents
Please check the package carefully upon receipt to ensure all items are present and undamaged.
- 1 x KT-8900R Mini Tri-Band Mobile Radio Transceiver
- 1 x Microphone
- 1 x Car Power Cable
- 1 x Fuse
- 1 x Mounting Bracket
- 1 x Screw Set
- 1 x User Manual

Specifications
General Specifications
| Feature | Description |
|---|---|
| Model | KT-8900R |
| Frequency Range | 136-174MHz / 240-260MHz / 400-480MHz |
| Channel Capacity | 200 Channels |
| Channel Spacing | 25KHz, 20KHz, 12.5KHz |
| Channel Step | 2.5KHz, 5KHz, 6.25KHz, 10KHz, 12.5KHz, 15KHz, 25KHz |
| Working Voltage | 13.8V DC ±15% |
| Squelch Way | CARRIER / CTCSS / DCS / 5Tone / 2Tone / DTMF |
| Frequency Stability | ±2.5ppm |
| Operating Temperature | -20℃ ~ +60℃ |
| Dimensions (W*H*D) | 103(W) * 47(H) * 126(D)mm |
Receiver Specifications (ETSI EN 300 086 Standardized Test)
| Feature | Wide Band | Narrow Band |
|---|---|---|
| Sensitivity | ≤0.25μV | ≤0.35μV |
| Channel Choice | ≥70dB | ≥60dB |
| Intermodulation | ≥65dB | ≥60dB |
| Spurious Rejection | ≥70dB | ≥70dB |
| Audio Response | +1 ~ -3dB (0.3 ~ 3KHz) | +1 ~ -3dB (0.3 ~ 2.55KHz) |
| Signal to Noise Ratio | ≥45dB | ≥40dB |
| Audio Distortion | ≤5% | |
| Audio Output Power | ≥2W ±10% | |
Transmitter Specifications (ETSI EN 300 086 Standardized Test)
| Feature | Wide Band | Narrow Band |
|---|---|---|
| Output Power | 25W/20W (VHF/UHF) | |
| Modulation Mode | 16KΦF3E | 11KΦF3E |
| Channel Power | ≥70dB | ≥60dB |
| Signal Noise Ratio | ≥40dB | ≥36dB |
| Parasitic Harmonic | ≥60dB | ≥60dB |
| Audio Response | +1 ~ -3dB (0.3 ~ 3KHz) | +1 ~ -3dB (0.3 ~ 2.25KHz) |
| Audio Distortion | ≤5% | |
Setup Guide
1. Mounting the Transceiver
- Choose a secure and accessible location in your vehicle or base station for mounting the KT-8900R. Ensure adequate ventilation around the unit.
- Use the provided mounting bracket and screws to securely fasten the transceiver.
2. Power Connection
- Connect the supplied car power cable to the power input port on the rear of the KT-8900R.
- For vehicle use, connect the other end of the car power cable to your vehicle's 13.8V DC power source (e.g., cigarette lighter socket or direct battery connection with appropriate fusing).
- For base station use, an optional AC/DC adapter (220-240V AC input, 13.8V DC output) can be used. Ensure the adapter meets the power requirements of the radio.
- Ensure the fuse is correctly installed in the power cable.

3. Antenna Connection
- Connect a suitable tri-band antenna (136-174MHz, 240-260MHz, 400-480MHz) to the antenna connector on the rear of the transceiver.
- Ensure the antenna is properly tuned for the operating frequencies to prevent damage to the radio.
4. Microphone Connection
- Plug the microphone's RJ45 connector into the microphone port on the front of the KT-8900R.

Operating Instructions
1. Power On/Off
- Press the 'POW' button on the front panel to turn the radio on or off.
2. Volume Adjustment
- Rotate the volume knob (typically on the left side of the front panel) to adjust the audio output level.
3. Channel and Frequency Selection
- The KT-8900R supports 200 channels and operates across three frequency bands: 136-174MHz, 240-260MHz, and 400-480MHz.
- Use the 'V/M' button to switch between Frequency mode and Channel mode.
- In Frequency mode, use the UP/DOWN buttons on the microphone or the main control knob to adjust the frequency.
- In Channel mode, use the UP/DOWN buttons or control knob to select a stored channel.
- The 'A/B' button allows switching between the main and sub-bands for dual display and dual standby operation.

4. Transmitting (PTT)
- To transmit, press and hold the Push-to-Talk (PTT) button on the side of the microphone.
- Speak clearly into the microphone.
- Release the PTT button to stop transmitting and return to receive mode.
5. Advanced Features
- CTCSS/DCS: Configure these tones for selective calling and to filter out unwanted signals. Refer to the detailed user manual for programming steps.
- Channel Scan: Activate the scan function to monitor active channels within your programmed range.
- DTMF: Use the DTMF keypad on the microphone for various functions, including repeater access or remote control.
- VOX: Voice-Operated Exchange allows for hands-free transmission when enabled. Adjust VOX sensitivity as needed.
- Lone Worker Mode: A safety feature that can be configured to periodically check on the user.
- Emergency Alarm: Activates an audible alarm in emergency situations.
6. Programming
The KT-8900R can be programmed via a computer using a USB programming cable (sold separately) and compatible software. This allows for customization of channels, frequencies, and other advanced settings. Connect the USB programming cable to the radio and your computer, then follow the software instructions.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Environmental Conditions: Avoid exposing the radio to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Antenna Care: Regularly check your antenna and its connections for any signs of wear or damage.
- Power Cable: Inspect the power cable and fuse periodically for integrity.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure optimal performance.
Troubleshooting
- No Power: Ensure the power cable is securely connected, the vehicle's power source is active, and the fuse is not blown.
- No Transmission/Reception: Check antenna connection, ensure correct frequency/channel is selected, verify CTCSS/DCS settings match the other party, and confirm output power settings.
- Poor Audio Quality: Adjust volume, check microphone connection, ensure antenna is properly tuned, and check for strong interference sources.
- Display Issues: If the display is blank or erratic, try power cycling the unit. If issues persist, consult the full user manual or support.
User Tips
- For optimal performance, always use a high-quality, properly tuned antenna for the specific frequency bands you intend to operate on.
- Familiarize yourself with local amateur radio regulations and licensing requirements before operating.
- Consider programming frequently used channels and repeater offsets into memory for quick access.
- When using the programming cable, ensure you have the correct drivers and software version for your operating system.
Warranty and Support
For detailed warranty information and technical support, please refer to the official QYT website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.