1. Product Overview
The HWATEL 6-Band Cellular Amplifier Signal Booster is designed to improve cellular signal strength across multiple frequency bands, supporting 2G, 3G, 4G, and 5G networks. This system includes an outdoor antenna to capture weak signals, a booster unit to amplify them, and an indoor antenna to redistribute the enhanced signal within your desired area.
Package Contents
Before installation, please verify that all items are present in your package:
- Booster Unit: 1 pcs
- AC/DC Power Adaptor: 1 pcs
- BIG LOG Outdoor Antenna (45cm, 18dB gain): 1 pcs
- Indoor Panel Antenna: 1 pcs
- Coaxial Cable (10 meters): 1 pcs

2. Specifications
| Feature | Description |
|---|---|
| Frequency Bands | B28 (700MHz APT 5G), B20 (800MHz 5G/4.5G), B8 (GSM 900MHz 2G), B3 (DCS 1800MHz 4G), B1 (WCDMA 2100MHz 3G), B7 (IMT 2600MHz 5G/4.5G) |
| Boost | 2G/3G Voice + 4G/5G Network |
| Gain | 70 ± 3dB |
| Coverage Area | Up to 500 Square Meters |
| Product Type | Modem Cable (Cellular Amplifier) |
| Certifications | CE, FCC, RoHS |
| Booster Dimensions | 200mm x 195mm x 20mm (approximate) |
| Package Dimensions | Length: 35cm, Width: 24cm, Height: 19cm |
| Package Weight | 4.0 kg |

3. Installation Guide
Proper installation is crucial for optimal performance. Follow these steps carefully:
3.1 Pre-Installation Check: Do you need a booster?
A cellular booster will only work if there is an existing outdoor signal, even if it's weak. The signal level should be better than 3 bars (approximately -108dBm). Additionally, ensure the outdoor signal frequency matches the booster's supported bands.
You can check your signal strength and band using:
- Android: Use apps like 'Cellular-Z' or 'Network Cell Info'.
- iPhone: Dial *3001#12345#* and navigate to 'Serving Cell Info' to find RSRP and Band information.

3.2 Choosing Antennas
Outdoor Antenna Selection
The included LOG antenna is directional, focusing energy in one direction for a longer range (up to 5km for a 45cm antenna). This is generally more effective than an omni-directional antenna which scatters signal all around.

Indoor Antenna Selection
The included Panel Antenna (11dB) is designed to cover an entire room. Other types like Ceiling antennas (5dB) cover half a room, and Whip antennas (3dB) cover only a part of a room.

3.3 Installation Steps
Follow these steps to install your cellular amplifier system:
- Position the Outdoor Antenna: Measure and find a position outdoors where you can receive a good cellular signal. This is typically on a rooftop, balcony, or pole. Install the outdoor antenna in this location.
- Connect Outdoor Antenna to Booster: Connect the outdoor antenna to the 'Outdoor' port (labeled 'MS' or similar) on the booster unit using the provided coaxial cable.
- Connect Indoor Antenna to Booster: Connect the indoor panel antenna to the 'Indoor' port (labeled 'BTS' or similar) on the booster unit.
- Ensure Antenna Separation: It is critical that the outdoor and indoor antennas are separated by a physical barrier (like a wall) or a minimum distance of 10 meters to prevent signal oscillation.
- Power On: Connect the power adaptor to the booster unit and plug it into an electrical outlet. The booster will power on.
- Adjust Outdoor Antenna (if necessary): After powering on, observe the signal strength on your phone. If needed, slightly adjust the direction of the outdoor antenna to maximize the signal strength.

Video 1: Installation and signal strength demonstration. This video shows the process of connecting the antennas to the booster and demonstrates the improvement in 2G, 3G, and 4G signal strength after the booster is powered on.
4. Operating Instructions
Once installed and powered on, the booster operates automatically. The booster unit features an LCD display that provides real-time information on the outdoor signal strength and status for each supported band.

The booster amplifies both voice (2G/3G) and data (4G/5G) signals, ensuring a stable connection within the coverage area.
5. Maintenance
The HWATEL Cellular Amplifier is designed for low maintenance. To ensure longevity and optimal performance:
- Keep the booster unit clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure all cable connections are secure and free from damage.
- Avoid exposing the booster unit to extreme temperatures, moisture, or direct sunlight.
- Periodically check the outdoor antenna for any physical damage or misalignment, especially after strong winds or storms.
6. Troubleshooting
If you experience issues with your signal booster, refer to the following troubleshooting tips:
6.1 No Signal Improvement
- Check Outdoor Signal: Verify that there is at least a weak outdoor signal (3 bars or better, -108dBm) at the outdoor antenna's location. If there is no signal outdoors, the booster cannot create one.
- Antenna Alignment: Ensure the outdoor LOG antenna is pointed directly towards the nearest cell tower. Slight adjustments can significantly improve performance.
- Antenna Separation: Confirm that the outdoor and indoor antennas are sufficiently separated (at least 10 meters or by a solid wall) to prevent oscillation (feedback loop). Oscillation can cause the booster to reduce its power or shut down.
- Cable Connections: Check all coaxial cable connections to ensure they are tight and properly secured. Loose connections can lead to signal loss.
- Power Supply: Ensure the booster unit is properly powered on and the power adaptor is functioning correctly.
- Correct Band: Confirm that the booster supports the specific frequency bands used by your cellular carrier in your area. Use the signal strength check methods described in Section 3.1.
6.2 Flashing Lights or Error on LCD
Refer to the booster's LCD display. If it shows an error or indicates oscillation, it usually points to insufficient isolation between the outdoor and indoor antennas. Increase the separation distance or improve the physical barrier between them.
7. User Tips
- Thick Walls: This booster has been noted to perform effectively even in challenging environments like old stone houses with very thick walls, significantly improving signal from one bar outside to full signal inside.
- Antenna Placement: Experiment with the exact placement and direction of your outdoor antenna. Even small adjustments can lead to noticeable improvements in signal strength.
- Indoor Coverage: For larger areas or multiple rooms, consider the placement of the indoor panel antenna carefully to maximize signal distribution.
8. Warranty and Support
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or further assistance, please contact the seller or refer to the contact information provided at the time of purchase. Keep your purchase receipt as proof of purchase.