1. Introduction
The ZTE U10S Pro is a high-performance portable wireless WiFi router designed to provide fast and reliable internet access on the go. Featuring a self-developed ZTE V3E chip, Wi-Fi 6 support, and a 3000mAh removable battery, this device offers a seamless online experience for up to 32 connected devices. Its compact design and plug-and-play nano SIM card support make it an ideal solution for various scenarios, from business trips to outdoor activities.
2. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact your vendor.
- ZTE U10S Pro Portable Wireless WiFi Router
- 3000mAh Removable Battery
- Charging Cable (Type-C, typically)
- Quick Start Guide (this manual)
3. Specifications
| Feature | Specification |
|---|---|
| Model | U10S Pro |
| Network Type | 4G LTE Router / Mobile Hotspot |
| LTE FDD Bands | B1/B3/B5/B8 |
| LTE TDD Bands | B34/B38/B39/B40/B41 |
| UMTS Bands | B1/B8 |
| Wi-Fi Standard | Wi-Fi 6 (802.11b/g/n/ax) |
| Peak Wi-Fi Speed | 229Mbps |
| 2.4G Wi-Fi Transmission Rate | 300 Mbps |
| Wi-Fi Supported Frequency | 2.4G |
| Max. Connected Devices | 32 |
| SIM Card Type | Nano SIM |
| Battery Capacity | 3000mAh (Removable) |
| Battery Life | Up to 10 hours (typical scenarios) |
| Dimensions (L x W x H) | 108mm x 59.8mm x 18.9mm |
| LAN Ports | 0 |
| Certification | CE |
4. Setup Guide
4.1. Installing the SIM Card and Battery
- Locate the back cover of the ZTE U10S Pro. Gently remove it to access the battery compartment.
- Insert the 3000mAh removable battery into its designated slot.
- Locate the nano SIM card slot. Carefully insert your nano SIM card into the slot until it clicks into place. Ensure the SIM card is oriented correctly as indicated by the diagram near the slot.
- Replace the back cover, ensuring it is securely fastened.
4.2. Powering On/Off
- To Power On: Press and hold the power button (usually located on the side or top) for a few seconds until the digital display lights up.
- To Power Off: Press and hold the power button until the device powers down.
4.3. Initial Configuration
Upon first power-on, the device will automatically detect the SIM card and attempt to connect to the 4G LTE network. The circular digital display will show network status, signal strength, and Wi-Fi information.
5. Operating Instructions
5.1. Connecting Devices to Wi-Fi
- Ensure your ZTE U10S Pro is powered on and has established a 4G LTE connection (indicated by the network status on the digital display).
- On your mobile phone, computer, tablet, or other Wi-Fi enabled device, search for available Wi-Fi networks.
- Locate the Wi-Fi network name (SSID) displayed on the ZTE U10S Pro's circular screen.
- Enter the Wi-Fi password (also displayed on the circular screen) when prompted.
- Your device should now be connected to the internet via the ZTE U10S Pro.
5.2. Monitoring Device Status
The circular digital display provides real-time information at a glance:
- Network Status: Indicates 4G LTE connection status and signal strength.
- Data Usage: Shows current data consumption.
- Speed: Displays upload and download speeds.
- Flow Status: Provides an overview of data traffic.
- Connected Users: Shows the number of devices currently connected.
- Wi-Fi Name (SSID) & Password: Essential for connecting new devices.
5.3. Battery Management
The 3000mAh removable battery provides up to 10 hours of usage. When the battery level is low, connect the device to a power source using the provided charging cable. The device can be used while charging.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% and store separately if removable.
- Firmware Updates: Periodically check the manufacturer's website or device management interface for available firmware updates to ensure optimal performance and security.
7. Troubleshooting
7.1. No Internet Connection
- Check SIM Card: Ensure the nano SIM card is correctly inserted and activated with a data plan.
- Signal Strength: Verify that the device is in an area with adequate 4G LTE signal coverage. Check the signal indicator on the digital display.
- Data Plan: Confirm your data plan is active and has available data.
- Reboot Device: Power off the ZTE U10S Pro, wait a few seconds, and then power it back on.
7.2. Wi-Fi Not Visible or Cannot Connect
- Device Power: Ensure the ZTE U10S Pro is powered on.
- Wi-Fi Enabled: Check the digital display to confirm Wi-Fi is active.
- Correct SSID/Password: Double-check that you are selecting the correct Wi-Fi network name (SSID) and entering the correct password as shown on the device's display.
- Distance: Ensure your connecting device is within the Wi-Fi range of the ZTE U10S Pro.
7.3. Slow Internet Speed
- Signal Strength: A weak 4G LTE signal can result in slower speeds. Try moving to an area with better reception.
- Connected Devices: Too many devices connected simultaneously can reduce speed for all users. The ZTE U10S Pro supports up to 32 devices, but performance may vary with heavy usage.
- Network Congestion: Network congestion from your mobile carrier can affect speeds.
- Data Throttling: Check if your data plan has reached a fair usage policy limit, which might result in throttled speeds.
8. User Tips
- Optimal Placement: For the best signal, place the ZTE U10S Pro in an open area, away from obstructions like thick walls or large metal objects.
- Battery Conservation: If not actively using the Wi-Fi, consider powering off the device to conserve battery life.
- Password Security: Regularly change your Wi-Fi password for enhanced security.
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact your point of purchase. For technical support, visit the official ZTE website or contact their customer service.
