1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MEKEDE Car Multimedia Player for BMW X1 E84 models (2009-2015). Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Important notice: This product involves electronic circuits, mechanical structures, or special installation processes. Non-professional operation may result in functional abnormalities and safety hazards. Please install and operate under the guidance of professional personnel! Please keep this product out of reach of children!
- For your safety, it is advisable to not watch video or operate the machine when you are driving. While driving, please adjust the volume to the optimum level.
- Before operating the machine, you are advised to read carefully and understand the safety instructions and warning signals stated in the manual. Keep the manual within reach for future reference.
- Firstly, please ensure safety on the road.
- In case of difficulty operating the machine, please stop the car safely before you operate the machine.
- While using GPS navigation, please adhere to traffic rules.
- Please do not operate the machine at restricted areas such as petrol stations, wine refineries, or strong electromagnetic obstruction areas to prevent danger.
- Please do not install, maintain, or repair the machine on your own with the power on. It is very dangerous to install and repair the machine by personnel without proper professional installation training and experience on electronic devices and automobile parts.
- Please do not install or store the machine, especially the display screen, directly under sunlight or hazardous substances. During installation, please ensure no direct contact with the air-conditioner's ventilation duct. This will cause damage to the machine and may injure the human body.
- Please do not use sharp objects to scratch or press the display screen vigorously as this may damage the screen.
- Please do not expose the machine under humid weather or direct contact with liquid to prevent fire or lighting.
3. Package Contents
The following items are included in your MEKEDE Car Multimedia Player package:

Figure 3.1: MN-X Series Package Contents
- Machine (Main Unit)
- Packaging Box
- Power Cable
- GPS Antenna
- AUX Cable
- 4G Antenna
- MIC (Microphone)
- USB Cable
Note: An iDrive knob is included as a gift with the purchase of the unit.
4. Specifications
The MEKEDE Car Multimedia Player offers the following technical specifications:

Figure 4.1: MN-X Parameters
| Feature | Specification |
|---|---|
| System | Android 14 (Android OS) |
| CPU | MTK6762, 8 Core (4*A53 2.0G + 4*A53 1.5G) |
| RAM | 6GB |
| ROM | 128GB |
| Display Size | 10.25 inch |
| Resolution | 1920*720 |
| Touch Screen | Yes |
| Internet Connectivity | 4G LTE + WiFi (5G WiFi supported) |
| DSP | Yes (32 EQ Adjustments) |
| CarPlay | Wireless iPhone CarPlay |
| Android Auto | Wireless Android Auto |
| USB | 2x USB |
| TF/Micro SD Slot | 1 |
| Bluetooth | BT 5.0 (Built-in smart BT system) |
| GPS | Built-in GPS navigation systems |
| Special Features | Built-In Speaker/Microphone, WiFi Function, Steering Wheel Control, 3G/4G Network Support, Built-in GPS, Charger, Mobile Phone, MP3 Players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support including English, Chinese, Arabic, German, Russian, French, Japanese, Spanish, Italian, etc. |
| Out Power | 4*45W |
| Voltage | 12 V |
| Material | Plastic + Hardware + Screen |
5. Setup & Installation
5.1 Compatibility Check
This unit is designed for BMW X1 E84 models from 2009 to 2015. It supports cars without an original screen and those with an original CIC System (4 PIN LVDS).

Figure 5.1: Before and After Installation
5.2 Audio Connection (AUX)
This unit outputs sound through AUX. Please confirm that your car has an AUX function before installation. If there is no AUX in your car, you may need to add an FM transmitter to produce audio, though the sound quality may not be as good as AUX. Alternatively, activate the auxiliary function in your local garage.

Figure 5.2: Setting Original System to AUX Mode
Steps to set AUX mode:
- Navigate to CD/Multimedia.
- Select External devices.
- Choose AUX front.
- Adjust volume as needed.
If you encounter a 'no sound' problem, ensure the original car fiber optic cable is connected to the conversion line interface and then to the host. Switch the mode to 'AUX'.

Figure 5.3: Fiber Optic Cable Connection for Sound

Figure 5.4: AUX Cable Connection
5.3 GPS Antenna Installation
Recommend installing the GPS antenna on the dashboard or rear shelf. The antenna should be installed on a leveled surface facing the sky to prevent blockage of radio waves as much as possible. Vehicles equipped with tempered glass or tint may weaken the receiving signal of the GPS antenna. Thus, it is recommended to install the antenna outside of the vehicle for optimal performance.
- Before affixing the GPS antenna, please ensure using a suitable cleaner to clean the designated surface. After cleaning, tear off the back of the tape and press to place the GPS antenna.
- Remove the side cover, move the cable through the storage box until it reaches the control panel of the machine. The cable needs to be fixed with a cable tie.
- Connect the GPS antenna's plug to the machine.
- Please ensure the system power is off when connecting to the GPS antenna.
- Please do not shorten or extend the GPS cable. Altering the length of the cable may result in a short circuit or malfunction that may damage the product.
- Please do not interfere with the GPS antenna with the steering wheel or gear lever, as it may be dangerous.
5.4 Camera Wiring & Setup
For aftermarket cameras, connect the camera's video output to the unit's Rear View Camera Input (CVBS/AHD). The reversing detection line should be connected to the car's parking light (+).

Figure 5.5: Added Camera Wiring Diagram
Camera Type Setting:
- Go to Settings > BackCar setting.
- If using an original camera, set the camera type to "Original back car".
- For aftermarket cameras, select the appropriate resolution (e.g., AHD720P-25, AHD1080P-25, etc.) or "Auto identification (default)".

Figure 5.6: Setting Camera Type for Original Back Car
5.5 Display Resolution Setting
If the OEM menu shows symptoms like "No signal" or flickering, check the LVDS connector and then set the original menu resolution.

Figure 5.7: Setting Display Resolution
Steps to set resolution:
- Go to Settings.
- Select Personalized Setting.
- Choose Resolution ratio.
The display screen of the original car should correspond to the selected option, otherwise the display quality may be poor.
6. Operating Instructions
6.1 Basic Operation
- Power On/Off: When ACC is connected, press the power button on the front panel to switch on the machine. To turn off, press the power button again. Turn off the engine and unplug the car key to switch off completely.
- Volume Adjustment: Press "+R-" on the front panel (or VOL+/VOL- buttons) to adjust the volume.
- Mute Control: Press the left volume button to display the volume bar, then press the media volume to MUTE.
- Backlight Control: Adjust the backlight in the Display settings under car settings.
6.2 User Interface (UI)
The unit features a newly upgraded Android system with added features and an optimized system. You can choose to display different UIs according to your preference, integrating commonly used functions into the desktop for a more perfect visual impact. It supports automatic switching between day and night modes to reduce visual fatigue.

Figure 6.1: UI Collection
6.3 Dual System Switching
The unit is compatible with the original car system. You can switch between the original car system and the Android 14 system at will.

Figure 6.2: Dual System Free Switching
6.4 Wireless CarPlay & Android Auto
The unit supports wireless Apple CarPlay and wireless Android Auto, allowing intelligent and safe use of your smartphone in the car. You can use navigation, make calls, send/receive messages, and listen to music while staying focused on driving.

Figure 6.3: CarPlay and Android Auto Connection
Wireless CarPlay (iOS system) Connection Steps:
- Connect BT.
- Click on "Phone Link" and wait for connection. (CarPlay can also be connected via USB Cable).
Wired Auto (Android system) Connection Steps:
- Connect the mobile phone and car DVD player with USB cable.
- Click on "Phone Link" and wait for connection.
6.5 Bluetooth Functionality
The built-in smart BT system (BT 5.0 version) supports mobile phone BT pairing, hands-free dialing, and steering wheel button control for safe driving.

Figure 6.4: Built-in Bluetooth Interface
Pairing with Mobile Phones:
- To activate the Bluetooth hands-free function, pair your mobile phone with the machine first.
- Turn on Bluetooth and Bluetooth device search function on your mobile phone.
- Search for the name of the machine (e.g., BT-E8D9).
- You are required to key in the corresponding PIN number (e.g., 0000) on your mobile phone to connect to the machine.
- Once connected, a "CONNECTED" sign will appear on the screen.
If the mobile phone has already been paired, you can touch the Bluetooth icon to directly connect. You may also touch the disconnect icon to disconnect.
Making Phone Calls:
Upon establishing the Bluetooth connection, you can dial directly on the phone or key in the telephone number on the dial pad. Touch the delete icon to remove incorrect numbers. When you enter a number, press the call icon to call or the hang-up icon to end the call.
Syncing Contacts:
The machine supports syncing contacts from your mobile phone. Once Bluetooth is connected, touch the sync icon to download contacts. After download, the contact will be synced and shown on the display screen during phone calls. For quick access, the contact book supports name search by the first alphabet.
Call History:
Call history shows outgoing, incoming, and missed calls. You can perform calls or delete entries from the call history.
Bluetooth Music:
This machine supports Bluetooth music playing. You can play music from your mobile phone and transfer it to the car's speakers via Bluetooth. It supports simplified controls such as "previous", "next", "pause", and "play".
Video 6.1: Product Demonstration (UI, Settings, Music, Video, Split Screen, EQ, Bluetooth, CarPlay)
6.6 Music Playback
The machine supports MP3 cover display. If the song comes with cover data and information, it will be shown on the cover display. You can switch between repeat modes (repeat current song, repeat all songs) and enable/disable shuffling of songs.
6.7 Video Playback
Touch the music video icon at the main interface. It supports flash internal storage card, USB drive, and various formats like APE, FLAC. You can loop playback, switch between videos, and play/pause the video.
6.8 Navigation
The unit features built-in GPS navigation with omni-directional map display. It supports Google Maps online navigation and includes built-in offline map navigation. You can install APK navigation applications and activate them through the settings.
- Navigation Map Data: You may copy navigation map data into the internal SD Card. Ensure sufficient storage space. Unnecessary data can be deleted via ES File Explorer.
- Navigation Activation: Upon successful installation of an APK Navigation Application, a corresponding icon will appear on the homepage. Touch the icon to launch the application. You can also link the navigation button to your preferred application in car settings.
6.9 DSP (Digital Sound Processor)
The powerful DSP chip supports 32 equalizer adjustments, giving you more control over the sound frequencies for better sound quality.

Figure 6.5: DSP 32 EQ Adjustments
Sound Effect Settings:
- Enter the sound effect interface by touching "Sound Effect".
- Balance Setting: Adjust the 4 speakers' volume using the four arrows. The volume is balanced when the black dot is at the center. Touch the restore icon to reset to default.
- Loudness Setting: Slide left or right to adjust loudness. Higher loudness increases low frequency value. Adjust reasonably to avoid signal loss.
6.10 4G LTE & WiFi Connectivity
The built-in 4G modules and WiFi allow you to stay connected to fast cellular data networks and the internet. You can enjoy online navigation, music, and movies. Insert a SIM card before turning on the device for 4G connectivity.

Figure 6.6: 4G LTE and WiFi Connectivity
6.11 Car Information Display
The unit supports displaying original car information such as speed, fuel level, oil pressure, tire pressure, temperature, and safety warnings on the dashboard.

Figure 6.7: Car Information Display
6.12 Split Screen Functionality
Support for two applications to be displayed on the screen at the same time, which makes operation more convenient and faster. You can view GPS navigation and video recording simultaneously, with the video recording picture being adjustable.

Figure 6.8: GPS Navigation and Split Screen
6.13 Rear View Camera (Optional Accessory)
When the car is in Reverse Gear, this car DVD will automatically switch to the back-up camera image view with parking lines. The picture quality of AHD rear-view video is clearer than that of ordinary cameras.

Figure 6.9: AHD Reversing Video
6.14 ADAS DVR (Optional Accessory)
The ADAS DVR provides anti-collision warning driving recording features, including front vehicle distance prediction, front vehicle anti-collision warning, and lane departure warning to make driving safer.

Figure 6.10: ADAS DVR
6.15 OBD II (Optional Accessory)
With the OBD2 function available on this unit, you can retrieve real-time data and trouble codes from your vehicle's computer.

Figure 6.11: Support OBD II
6.16 TPMS (Optional Accessory)
The Tire Pressure Monitoring System (TPMS) records tire speed or uses electronic sensors installed in tires to provide effective safety guarantees for driving by monitoring tire pressure and temperature in real-time.

Figure 6.12: Support TPMS
7. Maintenance
7.1 Display Screen Care
- Do not expose the display screen directly under sunlight or heat for a long period of time to prevent damage.
- Do not expose the display screen directly under sunlight when it is not in use.
- The display screen should be used within the temperature ranges: operating -10℃~+50℃, storage -20℃~+80℃.
- Do not press the LCD screen vigorously to prevent damage. Except coordinating the touch panel functions, please touch the LCD screen gently to prevent scratches or dust.
- Small black dots or bright dots may appear on the LCD screen. This is not a defect but merely a specification of the LCD.
- If in use in cold areas, the LCD screen may be dimmer after power on but the brightness will adjust to normal after a short while.
- If exposed directly under sunlight, it may be difficult to see the LCD Screen due to reflection.
- Please turn off the power before cleaning the LCD Screen. Wipe the screen with a soft fabric to prevent scratches on the surface.
- Please do not use wet towels, benzene, or chemical-related cleaners to clean the LCD screen.
8. Troubleshooting Guide
If you encounter problems, refer to this guide. If problems persist, contact professional support. Do not dismantle the machine without proper advice.
| Issue | Cause | Action |
|---|---|---|
| Unable to power on | Car key not inserted or ACC not turned on | Insert car key and turn on ACC |
| Power cord not connected | Connect power cord correctly | |
| Fuse is damaged | Replace similar fuse | |
| Unresponsive touch screen | System multitasking (e.g., navigation) | Wait for a moment. If problem persists, contact customer service. |
| No rear view image | Reverse camera not installed | Install reverse camera and plug into CCD socket. |
| Reverse camera type does not match | Replace reverse camera. | |
| Rear view appears during reverse position even when system is not booted, power button is null | Safety feature: rear view function preset for safety priority | Power on to boot the system after resuming from reverse position to normal. |
| No GPS signal | GPS antenna not connected | Connect GPS antenna correctly |
| Car may be at a GPS signal blind spot | Drive for a distance to check. | |
| Positioning and navigation failed upon power on | Blind spot of navigation map; remote areas or routes not covered in map | Contact customer service to update map. |
| Unable to locate destination routes | Incorrect spelling of destination | Ensure correct spelling, try possible names. |
| Destination not updated in database | If still unable to search, destination may not be updated. | |
| Navigation routes are far | Navigation system sets route based on map data, considering road grade, traffic rules, etc. | System is functioning as designed. |
| Blank on the map | Scale setting issue | Zoom in/out to adjust map display. |
| Loss of GPS Signal | Reset destination or select new landmark. | |
| No Sound / Music not heard | AUX cable not connected or AUX mode not activated. | Check AUX connection and activate AUX mode in original car settings. If no AUX, consider FM transmitter. |
| Screen locked, asking for code | Security feature activated or system error. | Refer to the manual for default codes or contact support. |
| Slow performance / Turns off by itself | System overload or power supply issue. | Ensure proper power connection. Try factory reset. If persistent, contact support. |
| Control buttons (knob) don't work well | Compatibility issue with specific car years or incorrect setting. | Check knob control type setting in Personalization. Some car years may not support knob control for Android screen. |
| Controller light always on | Wiring issue or system configuration. | Verify wiring connections. Consult support if issue persists. |
9. User Tips
- Installation Time: Installation can typically take around 3 hours.
- Performance: Users report smooth performance and responsive wireless CarPlay.
- AUX Connection: Always verify your car has an AUX input or be prepared to use an FM transmitter for audio.
- Knob Control: While an iDrive knob is included, some older BMW X1 E84 models might not fully support knob control for the Android screen, requiring touch screen interaction.
- Firmware Updates: MEKEDE offers free firmware, software, user interface, and GPS navigation map updates to enhance your experience.
10. Warranty & Support
The product comes with a 3-year warranty. If you encounter any problems after receiving the device, please contact customer service immediately. Do not open a dispute as it may hinder problem resolution. Provide a clear description of your issue.
Manufacturer: Shenzhen Mekede Technology Co.,Ltd
3rd Floor, Building B, No.8 Caiyun First Road, Longteng Industrial Park, Longcheng Street, Longgang District, Shenzhen
EU Authorized Representative: SUCCESS COURIER SL
Calle Rio Tormes Num.1, Planta1, Derecha, Oficina 3, Fuenlabrada, Madrid, 28947, Spain
11. Certifications
This product is certified with CE, FCC, RoHS, and WEEE standards, indicating compliance with health, safety, and environmental protection regulations.

Figure 11.1: Product Certifications