Philips SPA3808 Bluetooth and Wired Computer Speaker User Manual

1. Introduction

Thank you for choosing the Philips SPA3808 Speaker. This speaker is designed to provide high-fidelity stereo sound for your computer and other audio devices, supporting both Bluetooth wireless and wired USB connections. Its wooden enclosure helps deliver pure, clear audio without interference. This manual will guide you through the setup, operation, and maintenance of your new speaker.

2. Product Overview

2.1. Components

• Speaker Unit: The main sound output device.
• Integrated Phone/Tablet Holder: A slot on top of the speaker to conveniently hold your mobile device.
• Volume/Mode Control Knob: A multi-function knob for adjusting volume and switching between input modes.
• USB Cable: For wired connection and power supply.

2.2. Controls and Indicators

• Volume Knob: Rotate to adjust the volume.
• Mode Switch (Integrated with Knob): Press the knob to switch between Bluetooth mode and Sound Card (USB) mode.
• Indicator Light: Provides visual feedback on the current operating mode (e.g., blue for Bluetooth, white for Sound Card).

3. Setup Instructions

3.1. Placement

Place the speaker on a stable, flat surface. The wooden enclosure is designed to reduce vibration and prevent magnetic interference, ensuring purer sound quality. Ensure there is adequate space around the speaker for optimal sound dispersion.

3.2. Wired Connection (USB)

1. Locate the USB port on the back of the speaker.
2. Connect the provided USB cable to the speaker's USB port.
3. Plug the other end of the USB cable into an available USB port on your computer or a 5V/1A USB power adapter.
4. The speaker will automatically enter Sound Card mode (indicated by a white light) and function as an external sound card for your computer, providing both audio and power.

3.3. Bluetooth Connection

1. Ensure the speaker is powered on.
2. Press the control knob to switch to Bluetooth mode (indicated by a blue light). The speaker will enter pairing mode.
3. On your mobile device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
4. Select "Philips SPA3808" from the list of devices to pair.
5. Once paired, the indicator light will remain solid blue, and you can play audio wirelessly through the speaker.

4. Operating Instructions

4.1. Power On/Off and Volume Control

• The speaker powers on automatically when connected to a power source via USB.
• Rotate the volume knob clockwise to increase volume and counter-clockwise to decrease volume.

4.2. Switching Modes

Press the multi-function control knob to toggle between the two available modes:

• Bluetooth Mode: Indicated by a blue light. For wireless audio streaming.
• Sound Card Mode (USB): Indicated by a white light. For audio playback and power via USB connection to a computer.

4.3. Using the Phone Holder

The integrated slot on top of the speaker can be used to hold your smartphone or tablet, providing a convenient viewing angle while listening to audio or watching media.

4.4. Voice Prompts

Please note that the prompt tones for this product are in Chinese. When switching modes, Chinese voice prompts will announce "Bluetooth mode" and "sound card mode". If this is a concern, please consider it before use.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use liquid cleaners or abrasive materials.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid Water: This speaker is not waterproof. Keep it away from water and other liquids.

6. Troubleshooting

No sound from the speaker:

• Ensure the speaker is properly connected to a power source and turned on.
• Check the volume level on both the speaker and your connected device.
• If using a wired connection, ensure the USB cable is securely plugged into both the speaker and your computer. Verify that your computer's audio output is set to the Philips SPA3808.
• If using Bluetooth, ensure the speaker is in Bluetooth mode, paired correctly, and within range of your device. Try unpairing and re-pairing the device.

Poor sound quality or distortion:

• Reduce the volume on both the speaker and your connected device.
• Ensure the audio source is of good quality.
• Check for any physical obstructions around the speaker.
• If using Bluetooth, move your device closer to the speaker to improve signal strength.
• Ensure the speaker is placed on a stable surface to minimize vibrations.

Bluetooth device cannot pair:

• Ensure the speaker is in Bluetooth pairing mode (blue indicator light).
• Make sure your device's Bluetooth is enabled and searching for devices.
• Move your device closer to the speaker.
• Turn off and on both the speaker and your Bluetooth device, then try pairing again.
• Ensure no other devices are currently connected to the speaker via Bluetooth.

7. Specifications

*Dimensions and parameters are provided by Philips Laboratory and are for reference only.

8. User Tips

• Optimal Sound: For the best audio experience, ensure the speaker is placed at ear level and not obstructed by other objects.
• Bluetooth Range: Keep your paired device within 10 meters (33 feet) of the speaker for a stable Bluetooth connection.
• Power Source: While the speaker can be powered by a computer's USB port, using a dedicated 5V/1A USB power adapter might provide more consistent power, especially if your computer's USB ports are under heavy load.
• Cable Management: The 140cm USB cable offers flexibility for placement. Use cable ties to manage excess cable and keep your workspace tidy.

9. Warranty and Support

This Philips SPA3808 speaker comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Philips support website. For technical support, troubleshooting assistance, or service inquiries, please contact Philips customer service through their official channels.

10. Product Demonstration Video

Watch this video for a visual guide on the features and operation of the Philips SPA3808 speaker.