Maxto M6S Motorcycle Bluetooth Helmet Intercom

1. Introduction

The Maxto M6S is an advanced Bluetooth intercom system designed for motorcycle helmets, offering seamless communication and entertainment for riders. It features a dual Qualcomm Bluetooth 5.0 chip design, supporting multi-person networking, multi-channel audio mixing, and music sharing. With its IP67 waterproof rating and long-lasting battery, the M6S ensures reliable performance in various riding conditions.

For a complete visual guide and additional details, please refer to the official user manual PDF: Maxto M6S User Manual (PDF)

Figure 1: Maxto M6S Helmet Intercom

2. Package Contents

Ensure all items are present in the package before proceeding with installation:

• Bluetooth Host (M6S unit)
• Headphone & Microphone
• Clamp
• 3M Adhesive Clip
• User Manual (this document and PDF)
• Loudspeaker Velcro
• Data Cable (Type-C)

Figure 2: Maxto M6S Product Packaging and Contents

3. Setup Instructions

3.1. Installing the Host Unit

The M6S host unit can be installed using either the clamp or the 3M adhesive clip, depending on your helmet type and preference.

Using the Clamp:

1. Lift the left lining of your helmet.
2. Insert the clamp into a suitable position on the helmet's edge.
3. Tighten the screws on the clamp to secure it firmly.
4. Slide the M6S host unit into the clamp until it clicks into place.
5. Insert the headset plug into the headset jack on the host unit to complete the installation.

Using the 3M Adhesive Clip:

1. Choose an appropriate, flat position on the left side of your helmet for the adhesive clip. Ensure the surface is clean and dry.
2. Stick the 3M adhesive clip firmly onto the chosen position.
3. Slide the M6S host unit into the adhesive clip, ensuring it is firmly locked.

3.2. Installing Loudspeakers and Microphone

Proper placement of the loudspeakers and microphone is crucial for optimal audio quality and communication.

1. Lift the lining at the ear position inside your helmet.
2. Stick the provided Velcro loops onto the helmet lining at the ear positions.
3. Attach the loudspeakers to the Velcro loops. Ensure the loudspeaker with the shorter cable is installed on the left side.
4. Stick the butterfly sticker (for the microphone) at an appropriate position on the left side of the helmet.
5. Align the microphone with your mouth position.
6. Organize the cables neatly within the helmet lining to avoid discomfort and ensure they are not exposed.

3.3. Removing the Host Unit

To remove the M6S host unit:

1. Unplug the headset cable from the host unit.
2. If using the clamp, press the buckle at the top of the clamp and slide the host unit upward to remove it.
3. If using the 3M adhesive clip, carefully slide the host unit out of the clip.

4. Operating Instructions

4.1. Indicator Light Status

The M6S uses an indicator light to show its current status:

4.2. Key Functions

The Maxto M6S offers a range of features for an enhanced riding experience:

• Multi-rider MESH Ad-Hoc Network: Supports automatic networking for up to 8 people, allowing seamless entry and exit from travel teams.
• Multi-channel Audio Mixing: Enjoy music and chat simultaneously.
• FM Radio: Built-in FM functionality.
• Universal Bluetooth Connectivity: Connects to Bluetooth headsets from other brands/models.
• Music Sharing: Share stereo music with teammates with one click.
• Noise Control: DSP high-speed computing and CVC algorithm for precise processing, environmental noise recognition, enhanced human voice, and wind noise suppression.
• Dual Phone Connection: Connect to two phones simultaneously.
• Stereo Music: High-quality audio output.
• Audible Prompts: Voice prompts for device status.
• Voice Dial: Initiate calls using voice commands.
• Play Control: Control music playback (play, pause, skip tracks).
• Waterproof: IP67 dustproof and waterproof design.

Figure 3: M6S Intelligent Intercom Overview

4.3. Intercom Modes

The M6S supports various intercom modes to suit different group sizes and communication needs:

• Two-rider intercom mode: Direct communication between two riders.
• Multi-ride intercom friends mode: For groups of friends.
• Multi-ride intercom make friends mode: For connecting with new riders.

Figure 4: M6S Intercom Modes

4.4. Audio Quality and Noise Reduction

Equipped with a powerful DSP processor and complex audio algorithms, the M6S delivers a surging sense of hearing with improved low-frequency sensitivity. The CVC algorithm ensures clear communication by intelligently recognizing and suppressing environmental and wind noise.

Figure 5: Noise Reduction Illustration

4.5. Simplified Operation

The M6S features an independent integrated button and a large knob design, allowing for easy operation even when wearing gloves.

Figure 6: M6S Control Layout

5. Maintenance

To ensure the longevity and optimal performance of your Maxto M6S, please observe the following maintenance guidelines:

• Storage Temperature: The product's ideal storage temperature is between -20°C and 60°C (-4°F and 140°F). Avoid storing it in environments with extreme temperatures, as this can shorten its service life.
• Avoid Fire: Do not expose the product to fire, as it may cause an explosion.
• Long-term Storage: If you do not plan to use the product for an extended period, store it in a dry place. To maintain normal operation, charge it regularly (at least once every 3 months).
• Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.

6. Troubleshooting

If you encounter issues with your Maxto M6S, refer to the following common solutions:

• Device Not Turning On: If the M6S cannot be turned on, connect it to a power supply to charge. This will also initiate a reset.
• Intercom Connectivity Issues: Ensure all devices are within the 1000m range and are properly paired. Environmental factors like terrain and weather can affect intercom distance.
• Compatibility with Other Brands: The M6S is designed to connect with Bluetooth headsets from other brands. Ensure both devices are in pairing mode and follow their respective pairing instructions.
• Audio Quality Problems: Check that the loudspeakers and microphone are correctly installed and positioned. Ensure cables are not pinched or damaged.
• Battery Life Concerns: If battery life seems shorter than expected, ensure the device is fully charged before use. Remember to charge it regularly during long-term storage.

7. Specifications

*Actual time may vary due to phone type and usage status.

*Intercom distance may vary due to influence factors such as environment and climate.

8. User Tips

• Optimal Audio Experience: The M6S features enhanced low-frequency sensitivity and powerful DSP audio processing. For the best sound quality, ensure your helmet speakers are positioned directly over your ears.
• Easy Operation with Gloves: The large knob and integrated button design are optimized for use with gloves. Practice operating the controls before riding to familiarize yourself with their functions.
• Maximizing Intercom Range: While the M6S offers up to 1000m range, line of sight is crucial. For best results, try to maintain visual contact with other riders in your group.
• Regular Charging for Longevity: If storing the device for an extended period, remember to charge it every three months to prevent battery degradation and ensure it's ready for your next ride.

9. Warranty and Support

The Maxto M6S comes with the following warranty periods:

• M6S Host Unit: 1 year warranty
• Original Battery: 6 months warranty
• Original Headset (Headphone & Microphone): 6 months warranty

Please retain your purchase receipt as proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the Warranty Card included in your package or the official user manual PDF.

For further assistance or technical support, please contact your retailer or visit the official Maxto support channels.