ESKUTE ES-26-RWXD Electric Bike User Manual

1. Introduction

Welcome to the ESKUTE ES-26-RWXD Electric Bike user manual. This guide provides essential information for the safe operation, maintenance, and optimal performance of your new e-bike. Please read this manual thoroughly before your first ride and keep it for future reference.

Image: The ESKUTE ES-26-RWXD Electric Bike.

2. Safety Information

⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

General Safety Guidelines:

• Always wear a helmet and appropriate safety gear.
• Familiarize yourself with local e-bike laws and regulations.
• Perform a pre-ride safety check before each use.
• Do not ride under the influence of alcohol or drugs.
• Be aware of your surroundings and ride defensively.
• Ensure all components are securely fastened before riding.

3. Package Contents

• 1 x ESKUTE ES-26-RWXD Electric Bike
• 1 x Charger
• 1 x Toolkit
• 1 x User Manual

4. Setup and Assembly

4.1 Unpacking

• Carefully remove all components from the packaging.
• Inspect for any shipping damage. Contact support immediately if damage is found.
• Retain packaging for future transport or returns.

4.2 Initial Assembly (General Steps)

Your ESKUTE ES-26-RWXD bike comes partially assembled. The included toolkit contains basic tools for final assembly. Refer to the detailed assembly instructions in the printed manual for specific steps.

1. Handlebar Installation: Attach the handlebar to the stem, ensuring proper alignment and tightening all bolts securely.
2. Pedal Installation: Identify left (L) and right (R) pedals. Thread the left pedal counter-clockwise and the right pedal clockwise into the crank arms. Tighten firmly.
3. Seat Post Installation: Insert the seat post into the frame, adjust to a comfortable height, and secure with the quick-release lever or bolt.
4. Front Wheel Installation: If not pre-installed, attach the front wheel, ensuring the disc brake rotor is correctly seated in the caliper.

4.3 Battery Charging and Installation

The 48V 20Ah battery may not be fully charged upon arrival. It is recommended to fully charge the battery before your first ride.

Image: Close-up of the removable battery integrated into the bike frame.

• Charging: Connect the charger to the battery charging port (either on the bike or directly to the removed battery) and then to a power outlet. The charger indicator light will show charging status (e.g., red for charging, green for fully charged). Charging time is approximately 4-5 hours.
• Installation: Insert the fully charged battery into its compartment in the bike frame. Ensure it clicks securely into place. Use the key to lock the battery if applicable.

4.4 Tire Inflation

The Kenda 26 x 4.8" fat tires require specific pressure for optimal performance and safety. Check the sidewall of the tire for the recommended PSI range. Inflate tires using a suitable pump.

5. Operating Your Electric Bike

5.1 Powering On/Off

• To Power On: Press and hold the power button on the integrated smart LCD display.
• To Power Off: Press and hold the power button again until the display turns off.

Image: View of the handlebar controls and LCD display.

5.2 Pedal Assist System (PAS)

The ESKUTE ES-26-RWXD offers 5 levels of pedal assist. Use the '+' and '-' buttons on the display control panel to adjust the assist level.

• Level 0: No electric assistance.
• Level 1-5: Increasing levels of motor assistance as you pedal. Higher levels provide more power and speed.

5.3 Throttle Operation

The thumb throttle provides instant power without pedaling. Gently press the thumb throttle to engage the motor. The throttle can be used independently or in conjunction with pedal assist.

5.4 Gear Shifting

Your bike is equipped with SHIMANO 7-Speed gears. Use the shift lever on the handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding.

Image: Detail of the Shimano 7-speed gear system.

5.5 Braking

The hydraulic disc brakes provide strong and reliable stopping power. Apply both brake levers simultaneously for balanced and effective braking. Avoid sudden, hard braking, especially at high speeds.

Image: Detail of the hydraulic disc brake system.

5.6 LED Headlight

The StVZO-compliant LED headlight provides bright illumination for night riding. Operate the headlight via the display control panel. Ensure reflectors are clean and visible for maximum safety.

6. Maintenance

6.1 Battery Care

• Charge the battery regularly, even if not in use, to maintain its health.
• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid fully discharging the battery frequently.

6.2 Tire Maintenance

• Regularly check tire pressure and inflate to the recommended PSI.
• Inspect tires for wear, cuts, or punctures before each ride.

6.3 Brake System

• Check brake pads for wear and replace as needed.
• Ensure brake levers feel firm and responsive. If they feel spongy, the hydraulic system may need bleeding (professional service recommended).
• Keep brake rotors clean and free of oil or grease.

6.4 Drivetrain (Chain and Gears)

• Clean and lubricate the KMC chain regularly to prevent rust and ensure smooth shifting.
• Inspect gears for wear or damage.

6.5 General Cleaning

• Clean the bike with a damp cloth and mild soap. Avoid high-pressure washing, especially near electrical components.
• Do not submerge any electrical parts in water.

6.6 Suspension

• Periodically check the front fork and rear suspension for proper function and any signs of leaks.
• Ensure all suspension bolts are tight.

7. Troubleshooting

Common Issues and Solutions:

• Bike not powering on: Check if the battery is properly installed and charged. Ensure all connections are secure.
• Motor not assisting: Verify that the pedal assist level is not set to 0. Check battery charge. Ensure the speed sensor is clean and unobstructed.
• Brakes feel weak: Inspect brake pads for wear. Check for air in the hydraulic lines (requires professional service). Ensure rotors are clean.
• Gears not shifting smoothly: Clean and lubricate the chain. Check for bent derailleur hanger or damaged shift cable (professional adjustment may be needed).
• Unusual noises: Stop riding immediately and inspect the bike for loose components, rubbing parts, or damaged bearings.

For persistent issues, please contact ESKUTE customer support or a certified e-bike technician.

8. Specifications

9. User Tips

• Adjust Seat Height: Proper seat height is crucial for pedaling efficiency and comfort. Your leg should be slightly bent at the knee when the pedal is at its lowest point.
• Vary Pedal Assist: Experiment with different pedal assist levels to find the balance between effort and battery range that suits your ride.
• Pre-Ride Check: Always do a quick check of tires, brakes, and battery level before heading out.
• Secure Battery: Ensure the removable battery is always locked in place to prevent theft and accidental dislodgement during rides.
• Hydraulic Brake Bed-in: New hydraulic brakes may require a "bed-in" period for optimal performance. This involves several moderate stops from a cruising speed.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact ESKUTE customer service. Keep your purchase receipt as proof of purchase.

Contact information can typically be found on the official ESKUTE website or through your point of purchase.