1. Introduction
The Vgate iCar Pro 2S is an advanced Bluetooth 5.3 OBD-II adapter designed to transform your iPhone, Android device, or Windows PC into a professional-grade vehicle diagnostic scan tool. This device allows you to access all legal OBD-II protocols, enabling comprehensive vehicle health monitoring and troubleshooting.
Key functionalities include reading and clearing diagnostic trouble codes (DTCs), displaying real-time ECU sensor data such as engine speed, fuel system status, fuel pressure, and oxygen sensor voltage. The iCar Pro 2S features enhanced connection speed, support for new energy vehicles, and a low-power mode for efficient operation.
Image: Vgate iCar Pro 2S device with supported operating systems.
2. Setup Guide
2.1 Pre-purchase Compatibility Check
Important: The Vgate iCar Pro 2S supports 12V 16PIN OBD2 cars and Electric Vehicles (EVs). For EVs, it currently only supports BYD and Tesla models.
2.2 Physical Installation
- Locate the OBD Connector: Find the OBD connector in your car. It is typically located under the dashboard, often near the steering wheel.
- Plug in the Device: Firmly plug the Vgate iCar Pro 2S into the OBD connector. The device is designed for easy, plug-and-play installation.
Image: Steps 1 and 2 of the connection process, showing OBD port location and device insertion.
2.3 Software Connection (Using Car Scanner APP as an example)
The Vgate iCar Pro 2S is compatible with various third-party applications such as BimmerCode, Auto Doctor, Torque, and Car Scanner.
For Android System:
- Enable Bluetooth on your Android device.
- Search for the Bluetooth device named 'Android-Vlink'.
- Enter the pairing code '1234' to successfully pair the device.
- Open your chosen diagnostic app (e.g., Car Scanner) and proceed with the in-app connection setup.
For iOS System:
- Enable Bluetooth on your iOS device.
- There is no need to manually pair the device in your iOS Bluetooth settings.
- Open your chosen diagnostic app (e.g., Car Scanner) and set up the connection directly within the app.
For Windows System:
- Enable Bluetooth on your Windows PC.
- In Bluetooth settings, search for the device named 'Android-Vlink'.
- Enter the pairing code '1234' to successfully pair the device.
- Open your chosen diagnostic app and proceed with the in-app connection setup.
Image: Screenshots illustrating Bluetooth connection and app interface for diagnostics.
3. Operating Instructions
3.1 Core Functions
Once connected to your vehicle and diagnostic application, the Vgate iCar Pro 2S allows you to perform the following functions:
- Check Engine: Read and interpret engine fault codes.
- Data Logging: Record vehicle data over time.
- Display Current Sensor Data: View real-time data from various sensors (e.g., RPM, fuel system status, fuel pressure, oxygen sensor voltage).
- Real-time Connected: Maintain a live connection to your vehicle's ECU.
- Detect/Clear Fault Code: Identify and erase non-specific and manufacturer-specific diagnostic trouble codes.
- Vehicle Information: Access general information about your vehicle.
Image: Visual representation of iCar Pro 2S core functions.
3.2 Automatic Wake-up and Sleep
The iCar Pro 2S features BatterySaver technology, which includes an automatic wake-up and sleep function to protect your car's battery:
- Automatic Start: The device will automatically power on after your car's ignition is turned on.
- Automatic Sleep: The device will automatically enter a low-power sleep mode after 30 minutes from the car stall.
- EV Support: This automatic wake-up function is also supported on electric vehicles.
Image: Illustration of the automatic wake-up and sleep feature.
4. Maintenance
- Firmware Updates: The iCar Pro 2S supports free firmware updates. Regularly check the Vgate official website or your diagnostic app for available updates to ensure optimal performance and compatibility.
- BatterySaver Technology: The device's low-power mode (3mA in idle state) is designed to protect your car's battery. No specific user maintenance is required for this feature.
- Cleaning: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
5.1 Connection Issues
- Device Not Found: Ensure the iCar Pro 2S is firmly plugged into the vehicle's OBD port and the vehicle's ignition is on. Verify Bluetooth is enabled on your smart device/PC.
- Pairing Failure (Android/Windows): Double-check the pairing code '1234'. If issues persist, try restarting both the iCar Pro 2S (by unplugging and replugging) and your smart device/PC.
- App Connection Failure: Ensure you have selected the correct Bluetooth device within your diagnostic application. Some apps may require specific settings for ELM327 devices.
5.2 Data Reading Issues
- No Data/Incomplete Data: Verify your vehicle is OBD2/EOBD compliant. Ensure the diagnostic app is up-to-date and correctly configured for your vehicle's protocol.
- Specific System Access (e.g., ABS, Airbag): Standard OBD-II scanners primarily read powertrain data. Access to manufacturer-specific systems like ABS (Anti-lock Braking System) or SRS (Supplemental Restraint System/Airbag) depends on the capabilities of the diagnostic app and the vehicle's ECU. The iCar Pro 2S itself provides the communication interface; the app determines what data can be read or cleared.
5.3 Compatibility Questions
- Ford/Forscan: While the iCar Pro 2S is compatible with many third-party apps, specific software like Forscan may have particular hardware requirements. Check the Forscan documentation for compatible ELM327 adapters.
- Throttle Adaptation: Advanced functions like throttle adaptation are typically app-dependent and require specific support from both the diagnostic application and the vehicle's ECU.
6. Specifications
| Feature | Specification |
|---|---|
| Model | Vgate iCar Pro 2S |
| Communication Interface | OBD-II |
| Bluetooth Version | 5.3 |
| Hardware Version | V2.3 |
| Software Version | Latest Version |
| Supported Operating Systems | IOS, Android, PC |
| Compatible Software | BimmerCode, Auto Doctor, Torque, Car Scanner, etc. |
| Vehicle Compatibility | All OBD2/EOBD compliant vehicles (Petrol from 2001, Diesel from 2003/2004 in Europe; 1996 onwards in USA, 1998 in Canada). 12V petrol vehicles, 12V small diesel vehicles (load ≤ 6.5T). EV support for BYD and Tesla. |
| Maximum Bytes per Reading | 4095 |
| Maximum Communication Rate | 3.0 Mbps |
| Average Communication Rate (FPS) | 43.5 ~ 76.6 |
| Power Consumption | 34mA (operating), 3mA (idle/sleep) |
| Dimensions (approx.) | 4.1 cm (length) x 2 cm (height) x 4 cm (width) |
| Certification | CE |
| Origin | Mainland China |
Image: Detailed comparison of iCar Pro 2S specifications.
Image: Dimensions of the Vgate iCar Pro 2S.
7. User Tips
- App Selection: The performance and features available will largely depend on the diagnostic application you choose. Research apps like BimmerCode (for BMW), Auto Doctor, Torque, or Car Scanner to find one that best suits your needs and vehicle.
- Language Support: The iCar Pro 2S device itself is language-agnostic. The language displayed for diagnostic data and app interface will depend on the chosen diagnostic application and your smart device's system language settings.
- Advanced Functions: For advanced functions beyond basic code reading and live data (e.g., coding, specific system adaptations), ensure your chosen app explicitly supports these features for your specific vehicle model.
- EV Compatibility: While the iCar Pro 2S supports new energy vehicles, current EV compatibility is limited to BYD and Tesla. Always verify compatibility for your specific EV model.
8. Warranty and Support
8.1 Product Warranty
The Vgate iCar Pro 2S comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as described under normal use.
8.2 Software Updates
The device supports free software updates. It is recommended to regularly check for and install the latest firmware updates to ensure optimal performance, compatibility with new vehicle models, and access to new features. Update instructions are typically provided through the Vgate official website or within compatible diagnostic applications.
8.3 Technical Support
For technical assistance, troubleshooting, or inquiries regarding product functionality, please refer to the contact information provided with your purchase or visit the official Vgate support channels.
Image: Vgate iCar Pro 2S packaging and included user manual.
Image: Close-up of the Vgate iCar Pro 2S packaging.
