Braun MR300 MR4050 4162 4193 Mixing Blade Mixing Rod

Instruction Manual

Braun Food Processor Mixing Blade and Rod

Model Compatibility: MR300, MR4050, 4162, 4193

1. Product Overview

This accessory is a replacement mixing blade and rod designed for specific Braun Food Processor models. It is essential for blending, pureeing, and mixing various ingredients within your food processor.

Braun Food Processor Mixing Rod with Blade

Figure 1: Braun Food Processor Mixing Rod with Blade

Close-up of the mixing blade

Figure 2: Close-up view of the mixing blade

2. Safety Instructions

  • Always ensure the food processor is unplugged before attaching, detaching, or cleaning the mixing blade and rod.
  • Handle the blade with extreme care as it is very sharp.
  • Do not operate the food processor with damaged or improperly installed accessories.
  • Keep hands and utensils out of the container while processing food to prevent injury.

3. Setup and Installation

  1. Unpack: Carefully remove the mixing blade and rod from its packaging. Inspect for any damage.
  2. Prepare Food Processor: Ensure your Braun Food Processor is unplugged and the main unit is clean and ready for accessory attachment.
  3. Attach the Rod: Align the top of the mixing rod with the corresponding slot on your food processor's motor unit. Gently push and twist until it locks securely into place. Refer to your food processor's main manual for specific attachment mechanisms.
  4. Verify Connection: Give the rod a gentle tug to ensure it is firmly attached and will not detach during operation.
Side view of the mixing rod

Figure 3: Side view of the mixing rod, showing attachment point

4. Operating Instructions

  1. Add Ingredients: Place your ingredients into the food processor bowl. Ensure the liquid level or food volume does not exceed the maximum fill line indicated on your food processor bowl.
  2. Secure Lid: Place the lid onto the food processor bowl and ensure it is securely locked.
  3. Plug In: Plug the food processor into a power outlet.
  4. Start Processing: Select the desired speed setting on your food processor and activate the blending function.
  5. Monitor: Observe the consistency of your ingredients. Process until the desired texture is achieved.
  6. Finish: Once done, switch off the food processor and unplug it from the power outlet. Wait for the blade to completely stop before removing the lid.

5. Maintenance and Cleaning

  1. Detach: Unplug the food processor. Carefully detach the mixing rod and blade from the motor unit.
  2. Rinse Immediately: Rinse the blade and rod under running water immediately after use to prevent food from drying on the surfaces.
  3. Hand Washing: Wash the mixing blade and rod with warm, soapy water. Use a brush to clean around the blade carefully. Avoid direct contact with the sharp edges.
  4. Dishwasher Safe: This accessory is generally dishwasher safe (top rack recommended). However, always check your food processor's main manual for specific care instructions for accessories.
  5. Drying and Storage: Thoroughly dry all parts before storing. Store the mixing blade and rod in a safe place to prevent accidental cuts.

6. Troubleshooting

  • Accessory not attaching: Ensure the accessory is correctly aligned with the motor unit and twisted until it clicks into place. Check for any obstructions.
  • Poor mixing performance: Ensure the food processor bowl is not overfilled. Cut larger ingredients into smaller pieces before processing. Check if the blade is clean and free from debris.
  • Unusual noise during operation: Stop the food processor immediately. Unplug and check if the accessory is properly installed and if there are any foreign objects in the bowl.

7. Specifications

FeatureDetail
Product TypeFood Processor Mixing Blade and Rod
CompatibilityBraun Food Processor Models: MR300, MR4050, 4162, 4193
MaterialDurable Plastic, Stainless Steel Blade
OriginMainland China
Approx. Package Dimensions (L x W x H)30 cm x 30 cm x 20 cm
Approx. Package Weight0.25 kg

8. User Tips

  • For best results, ensure ingredients are cut into manageable sizes before blending.
  • When blending hot liquids, allow them to cool slightly before processing to prevent pressure buildup.
  • To achieve a smoother consistency, process in short pulses rather than continuous blending.
  • Always clean the accessory immediately after use to maintain hygiene and prolong its lifespan.

9. Warranty and Support

This product is covered by the standard manufacturer's warranty. For warranty claims, technical support, or replacement parts, please contact the seller or the official Braun customer service. Keep your proof of purchase for any warranty-related inquiries.


Industrial Warehouse Pallet Racking Systems & Mezzanine Floors Overview

Industrial Warehouse Pallet Racking Systems & Mezzanine Floors Overview

0:20 • 1088×720 • visual_overview

Related Documents - Various Racking Systems

Preview GAPSUK 460Z5 Electric Paper Guillotine: Installation and Operating Manual
Comprehensive installation and operating guide for the GAPSUK 460Z5 Electric Paper Guillotine, covering setup, operation, safety, blade replacement, and maintenance procedures.
Preview Danfoss FHM-CN2 Pre-assembled Mixing Shunt Installation Guide
Detailed installation guide for the Danfoss FHM-CN2 pre-assembled mixing shunt, covering overview, connection steps, optional configurations, and RoHS compliance.
Preview Chevrolet Captiva 2007 Body Repair Manual
Comprehensive repair guide for the Chevrolet Captiva 2007, detailing procedures for body systems, including window, mirror, and wiper replacements. Essential for technicians and owners.
Preview Understanding Coolant Technology & Selection | Gates
Learn about the functions of engine coolant, the four main types of coolant technology, and the importance of using the correct coolant recommended by vehicle manufacturers to prevent damage and maintain warranty. Information from Gates.
Preview Trask Turbo Systems Installation Guide for Harley Davidson V-Rod
Comprehensive installation guide for the Trask Turbo Systems V-Rod Turbo Kit. Includes step-by-step instructions, torque specifications, warranty information, and troubleshooting tips for Harley Davidson Milwaukee 8 engines.
Preview 2024 AFHVS-ASFS Conference Attendee Guide: Syracuse, NY
Official attendee guide for the 2024 AFHVS-ASFS Conference in Syracuse, NY (June 5-8). Details Whova app usage, virtual session access via Zoom, registration, parking, field trips, keynote speakers, campus navigation, dining, and sponsor information.