1. Introduction
The Infitary LED Car Headlight Bulb is designed to provide superior illumination for your vehicle, enhancing driving safety with its high brightness and efficient design. This manual provides detailed instructions for installation, operation, and maintenance.
Product Features
- High Brightness: Utilizes imported LED chips, offering several times higher brightness than traditional halogen lamps.
- Energy Saving & Environmental Protection: Significantly lower power consumption and a longer lifespan compared to traditional halogen lamps.
- Plug and Play: Compatible with the original vehicle circuit, generally requiring no circuit modification. Some models may require a decoder.
- Efficient Heat Dissipation: Features Aviation Aluminum 6063 material and a high-speed fan (12,000 RPM) for optimal cooling and extended lifespan.
- Durable Design: IP68 waterproof rating, operating temperature range of -60°C to +160°C.
Lamp Bead Explanation
The LED headlight bulbs come with various lamp bead options including COB, CSP1860, and CSP3570, each offering different levels of brightness and efficiency. The design ensures high luminous efficiency and quick heat conduction via a copper substrate.
- Single Beam Lamps (e.g., H7, H11, H1, H3, 880, 9005/HB3, 9006/HB4, 9012): These types typically have one lamp bead on each side of the lamp body, totaling two lamp beads. When in use, all light beads are illuminated.
- Dual Beam Lamps (e.g., H4/9003/HB2, 9004/HB1, 9007/HB5, 9008/H13): These types feature two beads on each side of the lamp body, totaling four beads. For most vehicles, half of the light bulbs are on during high beam and the other half are on during low beam. In some special car models, all light bulbs may be fully illuminated when high beam is activated.
Video: Demonstration of Infitary LED Headlight performance, showing low and high beam functionality and clear vision.
2. Setup and Installation
General Installation Steps
- Turn off the vehicle power and allow the headlights to cool down.
- Open the engine compartment. Locate the rear cover of the headlights, turn it counter-clockwise, and remove the original car light bulb.
- Insert the LED light into the original light socket, paying attention to positive and negative directions. Ensure the buckle is securely in place.
- After powering on, check if the lighting is normal and adjust the lens angle to meet the regulatory illumination range (low beam tangent level).
Installation Diagram: Type H11/9005/9006/9012/880

Image: Step-by-step visual guide for installing H11/9005/9006/9012/880 type LED headlights.
- Open the front cover of the vehicle and prepare to install the LED headlights.
- Find the original car bulb and unscrew it.
- Remove the original car bulb.
- Place the LED bulb in its original position.
- Twist the LED bulb until it fits and is secure.
- Connect the power supply and test if it works properly.
Installation Diagram: Type H1/H3/H4/H7/H13/9004/9007

Image: Step-by-step visual guide for installing H1/H3/H4/H7/H13/9004/9007 type LED headlights.
- Open the front cover of the vehicle and prepare to install the LED headlights.
- Find the original bulb location.
- Open the spring clip, take out the original bulb and chuck.
- Install on the new chuck.
- Press the spring clip and make it firm.
- Aim at the chuck slot, put the bulb into the chuck.
- Notice the chuck slot, make it match with the convex position.
- Rotate slightly and make the bayonet fixed.
- Connect the power supply and test if it works properly.
Installation Precautions
- Put the vehicle into park or make sure it is securely in gear.
- Ensure the ignition is turned off and keys are removed.
- Be careful to avoid burns, especially when turning on or off the vehicle's lighting.
- Do not touch the lamp bead with your fingers to avoid staining or damage. Do not press the fan to avoid damage.
- Pay attention to positive and negative polarity. Fully examine the connection of contact points, ports, and wires, as faulty connections can cause lighting problems.
- Ensure the end of the bulb does not contact the interior light shield of the headlight when adjusting. The wires of the lights should face down.
- It is best to install a dust cover to prevent dust from affecting the headlights' service life.
3. Operating Instructions
Light Performance
The Infitary LED headlights provide a pure white 6500K light. With specially designed LED chips, they offer an optimal light type, shape, and spotlight. The low beam provides a perfect shape with clear tangency, while the ultra-bright high beam ensures a long illumination distance, improving visibility and reaction time.

Image: Comparison of low beam and high beam illumination on a dark road.
All-Weather Performance
These LED headlights are designed to perform reliably in various adverse weather conditions, including rain, snow, haze, and dust, ensuring consistent visibility and safety.

Image: Visual representation of headlight effectiveness in various weather conditions.
4. Maintenance
Usage Recommendations
- Avoid prolonged continuous lighting. Intermittent shutdown is recommended if usage exceeds 4 hours.
- Check the cooling fan for dust accumulation every 6 months to ensure optimal performance and lifespan.
- In case of flickering or extinguishing, prioritize checking if the vehicle voltage is stable at the appropriate standard voltage (12V or 24V).
Heat Dissipation System
The headlights feature an advanced heat dissipation system, including aviation aluminum alloy 6063 material for better thermal conductivity and a 360-degree heat radiating design. A powerful turbo fan operating at 12,000 RPM ensures fast cooling, reducing light decay and extending the lifespan to over 100,000 hours.

Image: Exploded view of the LED headlight, highlighting the clip socket, LED source, aviation aluminum 6063 material, cooling Kirin fin, and high-speed fan.
5. Troubleshooting
Common Issues and Solutions
- Flickering or Errors: If the LED headlights are flickering or displaying errors after installation, it may be due to a difference in current. Energy-efficient LED headlights require less current than halogen or xenon lamps. In such cases, installing a pair of decoders can resolve the problem.
- Not Working After Installation: If the bulb does not work after installation, try reversing the plug 180° and reconnecting it.
- CANBUS Compatibility: The external drive includes built-in decoding and anti-interference features, making it Canbus-ready and EMC-ready. This design aims to prevent errors and flashing problems for 95% of vehicles.

Image: Circuit board illustrating intelligent decoding, efficient and stable operation, and error-free performance for most cars.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Infitary |
| Wattage | 72W-130W/Pair |
| Color Temperature | 6500K Cool White penetration |
| Voltage | 12 V (Operating Voltage) |
| Car Brand | Universal |
| Car Model | Universal Vehicle |
| Light Source | COB/1860/ZES/3570 Chips |
| Lumen | 15000LM-30000LM |
| Material | Aviation Aluminum 6063 |
| Heat Dissipation | Aviation Aluminum 6063 + Cooling fan |
| Waterproof Rating | IP68 |
| Lifespan | 100000 Hours |
| Canbus | No Error for 99% Cars |
| Certification | CE, RoHS, FCC, EMARK, WEEE |
| Package Included | 2*Led Headlight Bulbs, 1*Installation Manual |
Dimensions (Examples)

Image: Dimensions for H7, H4, H1, and H11 socket types.

Image: Dimensions for 9005, 9006, H3, 880, 9004, and H13 socket types.
7. User Tips
- Vehicle Compatibility: While these bulbs are designed for universal use, it's always best to verify compatibility for your specific car model and year. Some users have successfully installed them on vehicles like a 2002 Honda CR-V, VW Passat B6, and Renault Logan 2021 without issues.
- Flicker/Error Solution: If you experience flickering or dashboard errors, especially in vehicles known to be sensitive to LED upgrades (e.g., some Skoda, Volvo, Peugeot models), consider installing a CANBUS decoder.
- Installation Ease: Many users report a straightforward 'plug and play' installation process.
- Brightness: Users consistently praise the strong, white light output, significantly improving night visibility.
8. Warranty and Support
Warranty
This product comes with a 1-year warranty from the date of purchase.
Additional Resources
For further detailed information and diagrams, you may refer to the official user manual PDF.
Reference: User manual (PDF)