KKMOON Weather Clock

Contents

Tuya WiFi Intelligent Weather Clock

Model: Weather Clock

Brand: KKMOON

1. Introduction

This Tuya WiFi Intelligent Weather Clock features an LCD color screen and high-accuracy sensors for precise temperature and humidity measurements. It displays time, date, current weather status, indoor temperature and humidity, network temperature and humidity, and a 3-day weather forecast. The device automatically obtains and synchronizes weather data via WiFi. With APP intelligent control, you can set alarms for air pressure, UV index, wind speed, temperature, and humidity, and view historical data trends. The system supports up to 3 sub-sensors to monitor temperature and humidity in different locations simultaneously.

Tuya WiFi Intelligent Weather Clock with 3 sensors and app display
Figure 1.1: Tuya WiFi Intelligent Weather Clock with its sub-sensors and mobile app interface.

2. Package Contents

Please check the box for the following items:

  • 1 x Weather Clock (Base Unit)
  • 1 x Sub Sensor (additional sensors may be included depending on package)
  • 1 x Charging Cable
  • 1 x Lanyard
  • 1 x User Manual
Contents of the weather clock package including base unit, sensor, cable, lanyard, and manual
Figure 2.1: Items included in the package.

3. Product Overview

3.1 Base Unit Display Elements

Diagram of the weather clock display with labels for UV Index, Hourly Forecast, Digital Time, 3-Day Forecast, Sunrise/Sunset, Local Temp/Humidity
Figure 3.1: Main display elements of the Weather Clock.
  • UV Index: Displays current Ultraviolet Index.
  • Hourly Forecast Weather Condition: Shows weather conditions for upcoming hours.
  • Digital Time Display: Current time.
  • 3-Day Forecast Weather Conditions: Weather predictions for the next three days.
  • Sunrise & Sunset: Times for sunrise and sunset.
  • Local Temperature & Humidity: Current readings from the base unit.
  • Online City Temp & Humidity Data: Data retrieved from the network for your location.
  • Weather Icon: Visual representation of weather (sunny, cloudy, rain, thunder, snow, overcast).

3.2 Base Unit Back and Top View

Diagram of the back and top of the base unit, showing buttons and ports
Figure 3.2: Back and Top view of the Base Unit.
  • SYNC/PAIR button: For sensor synchronization and reset.
  • WiFi setup button: To enter WiFi connecting mode.
  • Power output (OUT 5V 1A): USB-A port for charging external devices.
  • Power input (INPUT 5V): Micro USB port for powering the base unit.
  • Hanging Hole: For wall mounting.
  • Stand: Integrated stand for table placement.
  • Display Brightness Control / Turn off alarm clock: Button on top for these functions.

3.3 Sensor Details

Diagrams of the sensor, showing front, top, back, and interior views with components labeled
Figure 3.3: Views of the Sub Sensor.
  • LED light (hidden): Indicates status.
  • Pair Button: For pairing with the base unit.
  • Lanyard slot: For attaching the lanyard.
  • Button battery slot: For sensor power.
  • Micro USB: For charging the sensor battery.

4. Setup

4.1 Installation and Placement

The Base Unit can be installed in two ways:

  • Stand on table: Use the integrated stand to place the unit on a flat surface.
  • Mount on wall: Use the wall hanging hole on the back of the unit to mount it on a wall.
Illustrations for standing the base unit on a table and mounting it on a wall
Figure 4.1: Base Unit installation options.

The sensors should be placed indoors or outdoors within the maximum communication distance of 80 meters (in an open environment) from the Base Unit. For optimal performance, the distance between the Base Unit and Sensor should be 50-80m (164-262ft) without obstacles.

4.2 App Download and Connection

To utilize the full features of your weather clock, download the "Smart Life" or "Tuya Smart" app from your mobile phone's App Store (iOS) or Google Play (Android). Scan the QR code below or search for the app directly.

Screenshots showing the app download and connection process
Figure 4.2: App connection guidance.
  1. Plug in the Base Unit to power. The WiFi icon on the display will flash, indicating it's in connecting mode. If the icon stays solid, long-press the "WiFi" button on the back of the Base Unit until it flashes to enter WiFi connecting mode.
  2. Start the "Smart Life" app. A small window showing "Devices to be added: 1" will pop up. Tap "Add". If not, manually add a device by clicking the "+" icon at the upper right corner and selecting "Add device" or searching for "Thermometer Station".
  3. The app will prompt you to "Enter your WiFi password". Select your 2.4G WiFi network (must be the same 2.4G WiFi network your mobile phone is connected to) and enter the password. Then click "Next".
  4. The device adding interface will pop up. Once the addition is completed, it will show a "Done" interface.
  5. On the interface where the device is displayed, you may click the edit icon to change the device name, then click "Done" to complete the network setting.

Attention: The device supports 2.4 GHz WiFi only. Please allow app access to your cellphone's Bluetooth before connecting. The app will help you find your device automatically. Also, allow app access to your cellphone's location to get city weather data from the service provider.

4.3 Sensor Pairing

To pair additional sensors with the Base Unit:

  1. Long press the "SYNC/PAIR" button on the Base Unit to enter synchronous mode. The sensor channel icon on the display will flash.
  2. Activate the sensor by pressing its button. A light spot on the front will flash.
  3. Press and hold the button on the sensor to sync it with the Base Unit. The Base Unit will beep once after successful synchronization and automatically exit SYNC mode.
  4. Repeat steps 2 and 3 for any additional sensors (up to 3 total).
Diagram showing the process of long pressing the SYNC/PAIR button on the base unit and activating the sensor for pairing
Figure 4.3: Sensor pairing process.

After connection, pressing the button on the paired sensor will make the Base Unit display the corresponding sensor channel icon and details, and the buzzer will beep thrice. If not, it means SYNC failed or the sensor is over the maximum distance.

Reset: Long press the "SYNC/PAIR" button on the Base Unit to clear all sensor channels and data. The buzzer will beep thrice.

5. Operating Instructions

5.1 Reading the Display

The large LCD display provides a comprehensive overview of weather and environmental data. Refer to Figure 3.1 for a detailed breakdown of each display element.

Detailed diagram of the weather clock display with all elements labeled for quick guidance
Figure 5.1: Quick guidance for display elements.

5.2 Alarm Clock Function

The weather clock includes an atomic alarm clock function.

  • Setting Alarm: Set the alarm clock only via the "Smart Life" or "Tuya Smart" app. Navigate to the "Thermometer Station Home Page" and select "Alarm clock setting" to configure your desired alarm time and days.
  • Turning Off Alarm: You can turn off the alarm clock via the app or by pressing the dedicated button on the top of the Base Unit.
Screenshots of the app interface for setting alarm time and days
Figure 5.2: Setting the alarm clock via the app.
Screenshots for turning off alarm via app and physical button
Figure 5.3: Turning off the alarm clock.

5.3 App Features and Data Viewing

The "Smart Life" / "Tuya Smart" app provides extensive control and data viewing capabilities:

  • Thermometer Station Home Page: View current temperature, humidity, weather status, alarm settings, and data from the Base Unit and connected sub-sensors. A low battery warning will appear for sensors below 10% battery.
  • General Setting: Configure various device settings.
  • Alarm Setting: Set and manage alarms.
  • Temperature/Humidity Alert Setting: Configure alerts for specific temperature and humidity thresholds.
  • History Record: View historical data trends for temperature and humidity.
Screenshot of Thermometer Station Home Page in app, showing various data points
Figure 5.4: Thermometer Station Home Page in the app.
Collage of app screens for Time Setting, General Setting, Alarm Setting, Temperature/Humidity Alert Setting, History Record
Figure 5.5: Overview of app interface features.

The Base Unit also features an extra USB output (5V, 1A) on the back, which can be used to charge your phone or other small devices.

6. Maintenance

6.1 Sensor Battery Charging

The sub-sensors are powered by a 3.7V, 400mA lithium battery. To charge a sensor:

  1. Twist the battery cover counter-clockwise to unlock and remove it.
  2. Insert a Micro USB power input charging cable into the sensor's Micro USB port.
  3. After charging, twist the battery cover clockwise to lock it back in place.

Note: A red indicator light means "Charging". When fully charged, the red indicator disappears.

Step-by-step illustrations for twisting the sensor cover, inserting Micro USB, and locking
Figure 6.1: Sensor battery charging process.

6.2 Cleaning

Wipe the device and sensors with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.

7. Troubleshooting

  • Device not connecting to WiFi: Ensure your WiFi network is 2.4GHz. The device does not support 5GHz networks. Check if the WiFi icon on the Base Unit is flashing. If not, long-press the WiFi button to enter connecting mode. Verify the WiFi password entered in the app is correct.
  • Sensors not displaying values: Ensure sensors are paired correctly (refer to Section 4.3). Check sensor battery levels. If a sensor is paired but offline (dashes/icon stays solid), it might be out of range or have a low battery.
  • Incorrect time/date: The clock automatically synchronizes time and date via the network once connected to WiFi. Ensure a stable internet connection.
  • No way to set summer clock (Daylight Saving Time): The device automatically adjusts for Daylight Saving Time when connected to the internet. Manual adjustment for this specific feature is not typically required or available.
  • External sensor values not displayed on the main unit: The sub-sensor temperature and humidity data can only be viewed on the mobile phone app, not directly on the Base Unit's display. The Base Unit displays its own local temperature and humidity.

8. Specifications

8.1 Base Unit Specifications

Feature Detail
Model SWS-S003
Material ABS+PC
Size 160 × 23 × 160mm (6.30 × 0.93 × 6.30in)
Color Black
Weight 335g
Input Micro USB 5V-2A
Output USB-A 5V-1A
Operating Temperature -20°C ~ 60°C (-4°F ~ 140°F)
Temperature Display Unit °C/°F
Humidity Display Unit RH%
Communication WiFi (2.4G) + Bluetooth
Accuracy (Temp) ±0.5°C
Accuracy (Humidity) ±2%RH

8.2 Sensor Specifications

Feature Detail
Power Supply 3.7V 400mA lithium battery
Power Input Micro USB
Standby Power Consumption ~6uA
Standby Time Up to 6 months
Communication Frequency 433.92MHz
Communication Distance Up to 80M (outdoor open environment)
Table with Base Unit and Sensor specifications
Figure 8.1: Detailed specifications for the Base Unit and Sensor.

9. User Tips

  • For optimal performance, ensure the Base Unit and sensors are within the recommended communication distance and free from major obstacles.
  • Remember that external sensor readings are primarily viewed through the mobile app, not directly on the main display.
  • If you experience issues with time synchronization, verify your internet connection is stable, as the clock relies on network time.
  • Consider the intelligent linkage features with other Tuya devices to automate your home environment based on temperature and humidity readings.

10. Warranty and Support

We strictly control quality problems before shipping to prevent outflow. If there are any product quality problems, you can send it back to us in its original condition, and we will repair or exchange a new one for you.

If the product is damaged during transit, please contact us before opening any dispute or leaving any negative feedback. We will do our best to fix the problem.

For further support or inquiries, please refer to the contact information provided with your purchase or on the official product page.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.