lilygo T-LoRaC6

Contents

LILYGO® T-LoRaC6 Development Board User Manual

Model: T-LoRaC6

1. Introduction

The LILYGO T-LoRaC6 is a compact and versatile development board designed for Internet of Things (IoT) applications requiring long-range, low-power communication. It integrates the powerful ESP32-C6 chipset, which features 2.4G Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Thread/Zigbee) capabilities. Additionally, it incorporates an SX1262 LoRa module, supporting LoRaWAN protocols across 433MHz, 868MHz, and 915MHz frequency bands. This board is ideal for developers looking to create projects that combine local wireless connectivity with extended-range communication.

2. Package Contents

Please check the package carefully to ensure all items are present and undamaged. If any items are missing or damaged, please contact customer support.

LILYGO T-LoRaC6 package contents: one board, two 10-pin headers, one 2-pin header.

Figure 2.1: Package Contents

  • 1 x LILYGO T-LoRaC6 Development Board
  • 2 x 10-pin Headers
  • 1 x 2-pin Header

3. Specifications

LILYGO T-LoRaC6 Specifications: Main Module ESP32-C6-MINI-1, Flash 4MB, Wireless protocols Wi-Fi 6, Bluetooth 5, 802.15.4, LoRa SX1262, Size 33x29mm.

Figure 3.1: T-LoRaC6 Specifications Overview

FeatureDescription
Main ModuleESP32-C6-MINI-1
Flash Memory4MB
Wireless Protocols2.4G Wi-Fi 6, Bluetooth 5 (LE), 802.15.4 (Thread/Zigbee)
LoRa TransceiverSX1262
Supported LoRa Frequencies433MHz, 868MHz, 915MHz
Supported LanguagesC/C++, Micropython, Lua
Programming PlatformsArduino-IDE, VS Code, ESP-IDF
Onboard FunctionsBOOT button, Reset button, Custom Function LED
Dimensions (L x W x H)33mm x 29mm x 6mm
USB Charging5V 500mA via USB-C

4. Pinout Diagram

Understanding the pinout is essential for connecting peripherals and integrating the T-LoRaC6 into your projects. The board features clearly labeled pins for power, GPIO, and communication interfaces.

LILYGO T-LoRaC6 Pinmap showing GPIOs, LoRa SX1262 connections, UART, and power pins.

Figure 4.1: T-LoRaC6 Pinmap

Key Pin Assignments:

  • Power: GND, 3V3, 5V
  • USB Data: DP, DM
  • LoRa SX1262 Interface:
    • SCLK: IO06
    • MISO: IO01
    • MOSI: IO00
    • CS: IO18
    • RST: IO21
    • DIO1: IO23
    • BUSY: IO22
  • LoRa (UART):
    • TX: GPIO14
    • RX: GPIO15
  • Other GPIOs: IO19, IO9, IO7, IO2, IO4, IO5, IO6, IO1, IO0
  • Special Functions:
    • RST/EN: Reset/Enable pin
    • BOOT: Boot button
    • LED: IO07 (Custom Function LED)
    • FSPI CS3: GPIO19
    • MTDO: GPIO07

The board also includes four M1.2 mounting holes for secure installation.

5. Setup

To begin using your LILYGO T-LoRaC6, you will need to set up your development environment and connect the board.

5.1 Development Environment Setup

The T-LoRaC6 supports various programming platforms. We recommend using the official LILYGO GitHub repository for the most up-to-date information and sample code:

Follow the instructions in the repository to set up your preferred programming environment (Arduino-IDE, VS Code, or ESP-IDF) and install the necessary libraries and board definitions.

5.2 Initial Connection

  1. Connect Antenna: For LoRa functionality, connect an appropriate 433MHz, 868MHz, or 915MHz antenna to the U.FL/IPEX connector on the board. This is crucial for proper long-range communication.
  2. Power On: Connect the T-LoRaC6 to your computer using a USB-C cable. The board will draw power from the USB port.
  3. Driver Installation: Your operating system may require specific USB-to-serial drivers. Refer to the GitHub repository for driver installation guides if the board is not recognized.

6. Operating Instructions

Once your development environment is configured and your code is uploaded to the T-LoRaC6, the board will execute your programmed firmware.

  1. Upload Firmware: Use your chosen programming platform (e.g., Arduino IDE) to compile and upload your sketch or program to the T-LoRaC6 via the USB-C connection.
  2. Power Supply: The board can be powered via the USB-C port (5V 500mA). For standalone applications, ensure a stable 5V power source is connected.
  3. LoRa Communication: If your firmware utilizes LoRa, ensure the antenna is correctly attached and configured for the desired frequency band (433MHz, 868MHz, or 915MHz).
  4. Wi-Fi/Bluetooth/802.15.4: If your application uses Wi-Fi, Bluetooth, or 802.15.4, ensure your code correctly initializes and manages these wireless interfaces.
  5. Monitoring: Use the serial monitor in your IDE to view debug output from the board.

7. Maintenance

Proper care and maintenance will extend the lifespan of your LILYGO T-LoRaC6 development board.

  • Cleaning: Keep the board clean and free from dust and debris. Use a soft, dry brush or compressed air to gently clean the components. Avoid using liquids or solvents.
  • Storage: Store the board in a dry, anti-static environment, away from direct sunlight and extreme temperatures.
  • Handling: Handle the board by its edges to avoid touching sensitive components. Static electricity can damage electronic circuits, so use anti-static precautions when handling.
  • Power Supply: Always use a stable 5V power supply. Over-voltage or unstable power can damage the board.

8. Troubleshooting

Here are some common issues and their potential solutions:

  • Board Not Powering On:
    • Check the USB-C cable connection.
    • Ensure your power source (computer USB port or external adapter) is providing sufficient power (5V).
  • Programming/Upload Fails:
    • Verify that the correct USB-to-serial drivers are installed on your computer.
    • Ensure the correct board and port are selected in your IDE.
    • Try pressing and holding the BOOT button while pressing and releasing the RST button, then releasing BOOT, to put the board into bootloader mode before uploading.
    • Check your code for syntax errors or compilation issues.
  • LoRa Communication Issues:
    • Ensure an appropriate antenna is securely connected to the U.FL/IPEX connector.
    • Verify that the LoRa frequency in your code matches the frequency of your antenna and the LoRa module version (433MHz, 868MHz, or 915MHz).
    • Check LoRa module initialization and configuration in your firmware.
  • Wi-Fi/Bluetooth Not Working:
    • Ensure your firmware correctly initializes and configures the Wi-Fi or Bluetooth module.
    • Check for proper network credentials (SSID, password) if connecting to a Wi-Fi network.
  • Board Not Recognized by Computer:
    • Install or update the necessary USB-to-serial drivers (e.g., CP210x or CH340 drivers, depending on the board's specific USB-to-serial chip).
    • Try a different USB-C cable or USB port.

9. User Tips

  • Antenna Connection: Always connect an appropriate LoRa antenna to the U.FL/IPEX connector before powering on the board, especially when transmitting. Operating without an antenna can damage the LoRa transceiver.
  • Power Consumption: The ESP32-C6 and LoRa module can draw significant current during transmission. For battery-powered applications, optimize your code for low-power modes and ensure your battery can supply peak current demands.
  • Community Support: The LILYGO community and the ESP32 ecosystem are vast. Utilize online forums, documentation, and the GitHub repository for project ideas, troubleshooting, and advanced usage.

10. Warranty and Support

For technical support, firmware updates, and community resources, please visit the official LILYGO GitHub repository:

For product-related inquiries, issues with your order, or to contact customer service, please reach out to the LILYGO Official Store directly through the platform where you made your purchase.

© 2024 LILYGO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.