INKBIRD Wireless BBQ Thermometer User Manual

1. Overview

The INKBIRD INT-11X-B (also referred to as INT-11P-B in some documentation) is a truly wireless and intelligent BBQ thermometer designed to simplify your cooking experience. It utilizes Bluetooth 5.1 connectivity, eliminating the need for wired probes and allowing for remote monitoring of food temperatures. This device accurately measures internal food temperatures during grilling, smoking, and other cooking methods, helping to prevent overcooking or undercooking. Simply insert the probe into your food, connect to the smartphone app, select your desired temperature and doneness, and the thermometer will alert you when your meal is ready.

Please read this manual thoroughly before using the INT-11X-B. Improper use may result in product damage, property damage, or personal injury. Fully charge the product before first use.

Figure 1: INKBIRD Wireless BBQ Thermometer INT-11X-B components and app interface.

2. Technical Specifications

3. Product Diagram

Figure 2: Probe Design and Dimensions.

Product Appearance

• Top Cover: Push to open the charging case.
• Probe Charging Dock: Where the probe rests for charging.
• Indicator Light: Shows battery status and pairing status.
• Take out the probe: Remove the probe from the charging case.

Probe Charging Case

• Operation Button: Used for checking battery level, resetting, and alarm control.
• Type-C Charging Port: For charging the case.

Probe

• Food-grade Stainless Steel: The main body of the probe.
• Safe Cooking Line: Indicates the minimum insertion depth into food.
• Ceramic Handle: Provides high temperature resistance.
• Charging Contact Point: Connects to the charging dock.

Figure 3: Probe with Dual Sensors and Temperature Ranges.

4. Setup

4.1 Initial Charging

1. Before first use, fully charge the product.
2. Place the probe into the charging position of the case. When charging begins, the device will emit a warning tone once. The indicator light on the charging case will flash green at a breathing rate. The probe will be fully charged in about 25 minutes.
3. Use the included USB-C charging cable to charge the charging case. It will be fully charged in about 3 hours. If using another cable, ensure it is a 5V 1A Type-C interface.

4.2 App Installation

Search for the "INKBIRD" App on Google Play Store (for Android 7.1 or higher) or Apple App Store (for iOS 12.0 or higher) to download it for free. Alternatively, you can scan the QR code provided in the manual (page 14) to download it directly.

Note on Location Permission:

• The app requires location information to discover and add nearby devices. INKBIRD assures that your location information is kept strictly confidential and will only be used for the app's location function. It will not be collected, used, or disclosed to any third party.

4.3 App Registration and Connection

1. Registration: Register an account by opening the app, selecting your Country/Region, and entering the verification code sent to you.
2. Connect:
   • Ensure the probe is fully charged in the case (indicator light flashes green then goes out).
   • Take out the probe from the charging case and press the button on the charging case. The indicator light on the charging case will show green.
   • Open the INKBIRD app, tap the "+" icon in the upper right corner, and follow the in-app instructions to complete the connection.

Important:

• Make sure Bluetooth is enabled on your smartphone/tablet and the device has sufficient power.
• Ensure the smartphone's positioning function is enabled and the app has location permissions.
• The distance between the probe and the charging case should not exceed 6 meters (19.68ft).
• Place the smartphone/tablet as close as possible to the charging case. Avoid metal objects and obstacles between the devices.
• If connection fails, restart the device, re-open the app, and repeat pairing steps. Consider turning off other Bluetooth devices in the connection range.

5. Operation

5.1 Using the Probe and App

1. Once connected, select the type of food you are cooking and set your taste preferences in the INKBIRD app.
2. Insert the probe into the center of the food, ensuring it goes beyond the safe cooking line.
3. The charging case functions as a Bluetooth signal repeater. Place it as close to the probe as possible (preferably within 6 meters) and ensure no metal objects or obstacles are in between. Do not place the charging case on an operating oven, stove, or other hot surface.
4. When the internal temperature of the food reaches the set point, the smartphone app and the thermometer will simultaneously alert you. You can stop the alarm via the app or by pressing the button on the charging case.

Figure 4: Wireless cooking with the INKBIRD probe.

Figure 5: Bluetooth 5.1 connection range and offline data storage.

Figure 6: INKBIRD App features for smarter cooking.

5.2 Indicator Light Reference Table

5.3 Key Definitions and Alarms

• Press the button on the charging case to illuminate the indicator light and show the battery level.
• Press and hold the button for 30 seconds to reset the unit to factory defaults (forced reset).
• When the charging case is in an alarm condition, press the button to turn off the alarm sound.

Note on Alarms:

• Pressing the button cancels all alarms except high-temperature alarms.
• If a high-temperature alarm is triggered, immediately stop heating, move the unit to a shaded, cool place, and turn off the unit's operation in the app. The unit will automatically stop the alarm when the temperature drops to a safe level.

5.4 Replacing a Damaged Probe

If your probe is damaged and needs replacement, place the new probe into the charging case and press and hold the button on the charging case for 10 seconds to enter probe pairing mode. Follow the app instructions, and the indicator light on the charging case will show the pairing status and result.

6. Maintenance

6.1 Cleaning

1. After each use, clean the probe with non-corrosive detergents and wipe it dry. The probe has an IP67 waterproof rating and is dishwasher safe.
2. Do not clean the charging case with running water or immerse it in water, as it is not waterproof and may cause damage to the battery. If necessary, use a slightly damp cloth to wipe it, being careful not to let water infiltrate.

Figure 7: Probe cleaning and dishwasher compatibility.

6.2 Storage and Battery Care

1. Store the entire unit (probe in charging case) in a cool, dry place, away from children.
2. Do not store this product in extreme weather, high humidity, direct sunlight, or environments with temperatures below 0°C or above 300°C (572°F), as this may affect battery life or cause damage.
3. If storing the product for a long time, charge the battery to about 50% to prevent deep discharge. Do not fully charge before storage, as this may shorten battery life.
4. Do not disassemble or replace the internal battery yourself.
5. If the battery level is too low, temperature measurements may be incorrect, indicator lights and alarms may be disabled, and the device may disconnect from the app. Charge it promptly.

7. Important Notes and Warnings

• This product is not suitable for use in microwave ovens or pressure cookers.
• When in use, ensure the probe is inserted into the center of the food and above the safe cooking line, avoiding hard bones.
• Do not use the probe in a cooking environment with a temperature higher than 300°C (572°F) or lower than -10°C (14°F). Do not cook directly on an open fire or burning charcoal, as this may damage the probe battery.
• Keep the charging case away from fire, heat sources, and direct sunlight.
• Do not touch the hot probe with bare hands during or after cooking. If it is necessary to touch the probe, use a tool with sufficient heat insulation to avoid scalding.
• If the probe falls out of the food, stop heating immediately and wait for it to cool down before removing it.
• This product is designed for barbecuing and cooking only. Any other use is not recommended.

8. Troubleshooting Guide

9. User Tips

• Optimal Probe Placement: Always insert the probe deep enough, past the "safe cooking line," to ensure accurate internal temperature readings. This prevents false readings from surface temperatures.
• Protect the Charging Case: Keep the charging case away from direct heat sources, open flames, and high humidity environments to prevent damage to its internal battery and electronics.
• Maximize Bluetooth Range: For the most stable and extended Bluetooth connection, minimize physical obstacles (walls, metal objects) between the probe, the charging case (acting as a repeater), and your smartphone.
• Pre-set Alarms: Utilize the app's pre-alarm feature to get notified a few degrees before your target temperature is reached, allowing you to prepare for removal or adjust cooking.

10. Warranty and Support

10.1 Warranty Information

This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge.

10.2 Customer Support

For any problems in use or to claim warranty service, please feel free to contact us at support@inkbird.com. We will do our best to help you.

11. Regulatory Compliance

11.1 FCC Requirement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

11.2 Declaration of Conformity

Hereby, the manufacturer declares that this product with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU.