EARUELETRIC EAMPDW-63

Contents

EARU ELECTRIC Tuya WiFi Smart Circuit Breaker EAMPDW-63 Series

Instruction Manual

1. Important Safety Instructions

WARNING:

  • This product does not feature an explosion-proof structure and must not be used in flammable environments, such as those containing flammable gases, liquids, or explosives.
  • Please use this product in accordance with the instructions in this manual.
  • Do not disassemble this product by yourself.
  • Pay attention to the rated voltage for use.

For optimal performance, please read this manual before using the sensor, and keep it properly for easy reference at any time.

2. Product Overview

The EARU ELECTRIC Tuya WiFi Smart Circuit Breaker is a versatile device designed for intelligent energy management and protection. It offers remote control, real-time monitoring of electrical parameters, and various adjustable protection functions to ensure the safety and efficiency of your electrical system.

Key features include:

  • Remote control ON/OFF at anytime from anywhere via your phone.
  • Review current, voltage, leakage current, and total kWh on your phone.
  • Timer function available in the SmartLife/Tuya app.
  • Adjustable over voltage, under voltage, over current, leakage current, and temperature protection settings via app or manually.
  • Prepaid function for energy management.
  • Low power consumption (less than 2W).

Note: This meter only supports 2.4G Wireless Network, NOT for 5G.

3. Specifications

AttributeValue
Brand NameEARUELETRIC
Model NumberEAMPDW-63 Series
DIY SuppliesElectrical
OriginMainland China
CertificationCE
Display TypeLCD
Power SupplyAC
Rated VoltageAC110/230V (Operation Range: AC80V-400V Single Phase)
Rated Frequency50/60Hz
Max Operating Current1A - 63A (Adjustable)
Output VoltageAC
PhaseSingle-phase
Accuracy Class1%
Measuring Energy Range0-99999.9 kWh
Operating Temperature-30℃ to 70℃
Working Altitude<2000m
Rated Insulation Voltage400V
Protection DegreeIP20
Output Contact1NO
Dimensions85*65*36 mm
Reconnect Time10s-99s (adjustable, default: 30s)
U And U Trip Delay0.5s
Battery IncludedNo
High-concerned chemicalNone

Product Style Comparison

Different models offer varying protection features. Refer to the table below to understand the capabilities of each model.

Overview of various EARU ELECTRIC smart energy protector device models, showing their displays and form factors.
FeatureEAMPDW-TY-63EAMPDW-TY-63BEAMPDW-TY-63SEAMPDW-TY-63CEAMPDW-TY-63D
Over Voltage Protection✓✓✓✓✓
Under Voltage Protection✓✓✓✓✓
Current Limit✓✓✓✓✓
Current Leakage Protection✓✓✓✓✓
Energy Monitor✓✓✓✓✓
Remote Control✓✓✓✓✓
Voice Control✓✓✓✓✓
Time Switch✓✓✓✓✓
Device Sharing✓✓✓✓✓
Temperature Protection✓✓✓✓✓
Backlight✓✓✓✓
Color Screen✓✓
BI-Direction Measuring✓✓
Loss of Current Protection✓
Time Period Overcurrent Protection control✓

4. Setup

4.1 Wiring Diagram

Ensure proper wiring for safe and correct operation. Connect the 'IN' terminals to the incoming power supply (N for Neutral, L for Live) and the 'OUT' terminals to the load.

Wiring diagram for the EARU ELECTRIC Smart Energy Protector Device, showing 'IN' and 'OUT' terminals for Neutral (N) and Live (L) connections.

4.2 App Installation and Device Pairing

To utilize the smart features of your circuit breaker, you need to install the Tuya Smart Life app and pair your device.

  1. Use your smartphone to scan QR codes or search for "Smart Life" or "Tuya Smart" app in Google Play or App Store to download and install.
  2. Create an account with your mobile number.
  3. Connect your mobile to your Wi-Fi router (2.4GHz network only).
  4. In the app, click "+" in the upper right corner of the homepage or click "Add device".
  5. Select "Breaker" or "Switch module (Wi-Fi)" from "Energy" category.
  6. Press the Wi-Fi button on the device for 5 seconds until the Wi-Fi indicator light starts flashing, then start to connect in the app.

Video demonstrating the app pairing process and basic control of the smart circuit breaker.

5. Operating Instructions

5.1 Display Parameters

The device's LCD screen displays various parameters. Use the 'SET' button to cycle through the displayed data.

Screenshots of the device's LCD display showing various parameters like voltage, current, kWh, overvoltage setting, undervoltage setting, overcurrent setting, leakage setting, restart time setting, over current leakage protect times, and temperature.

5.2 Manual Parameter Settings

You can adjust certain parameters directly on the device using the physical buttons.

  1. Click the SET button to view each data.
  2. Press the SET button for 5 seconds to enter setup mode. Then, press the SET button to select the parameter, and the up/down arrows to adjust the setting.
  3. To clear energy consumption data: Press and hold the up arrow for 10 seconds to display '000', then change it to '111' and press SET to save. The energy consumption data will be cleared.
  4. To perform a factory reset: Press and hold the up arrow for 10 seconds to display '000', then change it to '222' and press SET to save. The factory settings will be reset.

5.3 App Control and Monitoring

The Smart Life/Tuya app provides comprehensive control and monitoring capabilities:

  • **Remote ON/OFF**: Easily switch the circuit breaker on or off from anywhere.
  • **Energy Monitoring**: View real-time current, voltage, leakage current, and total kWh consumption.
  • **Timer Functions**: Set various schedules for automation:
    • **Countdown Mode**: Turn off devices after a set duration (e.g., turn off bedroom light after 10 minutes).
    • **Timed Mode**: Schedule devices to turn on/off at specific times (e.g., turn on living room light at 18:00).
    • **Recurring Timer Mode**: Set daily or weekly schedules (e.g., turn on living room light at 6:00, turn off at 8:00).
    • **Inching**: Temporarily turn on the device for a set period, then automatically turn off.
  • **Alarm Settings**: Configure various protection thresholds and enable/disable alarms:
    • **Current Leakage Protection**: Set threshold range 10-99mA (default: 0mA).
    • **Temperature Protection**: Set threshold range 10-85°C (default: 50°C).
    • **Under Voltage Protection**: Set threshold range 80V-210V (default: 175V).
    • **Over Voltage Protection**: Set threshold range 120V-300V (default: 275V).
    • **Current Limit Protection**: Set threshold range 1A-63A (default: 63A).
    • **Reconnect Times**: Set the number of automatic reclosing attempts (range 1-30).
    • **Reconnect Recovery Seconds**: Set the delay before reclosing (range 1-99 seconds).
  • **Voice Control**: Integrate with smart speakers like Alexa or Google Assistant for hands-free control.
  • Image showing a person using voice commands with smart speakers (Alexa and Google Home) to control lights, demonstrating the voice control feature of the smart circuit breaker.

6. Maintenance

To ensure the longevity and optimal performance of your EARU ELECTRIC Smart Circuit Breaker, follow these maintenance guidelines:

  • Keep the device clean and free from dust and moisture. Use a dry, soft cloth for cleaning.
  • Regularly check all wiring connections to ensure they are secure and free from corrosion.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Periodically check for any unusual sounds, smells, or visual signs of damage. If any issues are detected, disconnect power immediately and consult a qualified electrician.
  • Ensure the surrounding area has adequate ventilation to prevent overheating.

7. Troubleshooting

If you encounter issues with your smart circuit breaker, try the following steps:

  • **Device not powering on**: Check the main power supply and ensure all wiring connections are correct and secure.
  • **Wi-Fi connection issues**:
    • Ensure your Wi-Fi network is 2.4GHz. The device does not support 5GHz networks.
    • Verify your Wi-Fi password is correct.
    • Move the device closer to your Wi-Fi router to improve signal strength.
    • Restart your Wi-Fi router and try pairing again.
    • Perform a factory reset on the device (refer to Section 5.2) and attempt pairing.
  • **App not responding/device offline**:
    • Check your internet connection on your smartphone.
    • Ensure the device has power and its Wi-Fi indicator is stable (connected).
    • Close and reopen the Smart Life/Tuya app.
    • If the issue persists, try removing the device from the app and re-adding it.
  • **Protection functions not triggering**:
    • Verify that the protection thresholds are correctly set in the app or manually on the device.
    • Ensure the 'Tripping switch' for the specific protection (e.g., leakage, overcurrent) is enabled.

8. User Tips

  • This device is effective for monitoring and protecting individual circuits or appliances. One user found it reliable for measuring the wattage of devices in a rental property.
  • Regularly check the energy consumption data through the app to identify any unusual power usage patterns.
  • Utilize the timer functions to automate devices and save energy.

9. Warranty and Support

For warranty information and technical support, please refer to the official product page or contact the seller directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.