1. Introduction
Thank you for choosing the TELESIN Magnetic Desktop Phone Stand. This versatile and robust stand is designed to enhance your mobile phone usage experience, whether for live streaming, video recording, online teaching, or simply hands-free viewing. Its full-metal construction, magnetic quick-release system, and flexible adjustments provide stable and convenient support for your device.
Video: TELESIN Magnetic Desktop Phone Stand Product Demonstration
2. Safety Information
- Ensure the stand is placed on a stable, flat surface to prevent tipping.
- Do not overload the stand beyond its intended capacity (suitable for mobile phones ≤6.5 inches).
- Keep magnetic components away from sensitive electronic devices, credit cards, and pacemakers.
- Avoid exposing the product to extreme temperatures or direct sunlight for prolonged periods.
- Keep out of reach of children to prevent accidental injury or ingestion of small parts.
3. Package Contents
Please check the box for the following items:
- Packing Box
- Cantilever brackets
- Electromagnetic ring
- Magnetic rings
- Instruction manual
- Cleaning kits
- Hexagonal wrench

Image: Package Contents Diagram
4. Setup Instructions
- Unpack Components: Carefully remove all items from the packing box.
- Assemble the Stand: The cantilever brackets are typically pre-assembled to the base. Ensure all pivot points are securely fastened.
- Attach Magnetic Ring (for Android phones): If you have an Android phone or a non-MagSafe iPhone case, use one of the provided magnetic rings. Clean the back of your phone or case thoroughly with the cleaning kits. Peel off the adhesive backing from the magnetic ring and carefully center it on the back of your phone/case. Press firmly for 30 seconds to ensure a strong bond.
- Position the Stand: Place the stand on a flat, stable surface. The metal base with its EVA anti-slip pad ensures stability.

Image: Stable Metal Base with Anti-slip Pad
5. Operating Instructions
5.1 Attaching Your Phone
- Simply bring your iPhone (with MagSafe) or Android phone (with attached magnetic ring) close to the electromagnetic ring on the stand. The strong magnetic force will securely attach your phone.
- The magnetic design allows for easy one-hand placement and removal.

Image: Magnetic Ring Suction for Easy Pickup
5.2 Adjusting Angles
- The stand features a full-metal shaft with an all-metal pivot design, allowing for free rotation without sagging.
- Adjust the cantilever brackets and the ball head design to achieve diverse and flexible angles for optimal viewing or recording.
- The 360° dual-damping metal shaft ensures smooth and stable adjustments.

Image: All-Metal Pivot for Stable Support

Image: Full-Metal Shaft for Flexible Angles
5.3 Using with Accessories
- The stand includes a 1/4 inch thread for connecting various photography accessories, such as ring lights or external microphones.
- For enhanced heat dissipation during prolonged use, a magnetic cooler (purchased separately) can be attached to the double-sided magnetic ring. The hollow-out design of the stand's magnetic ring is equipped to accommodate a radiator.

Image: Double-Sided Magnetic Attachment for Cooling

Image: Magnetic Cooling Comparison

Image: Diverse Expansion with 1/4 inch Thread
5.4 Storage
- The stand features a foldable design, allowing the round tube body to fold for space-saving and convenient storage.

Image: Foldable Storage
6. Maintenance
- Clean the stand regularly with a soft, dry cloth.
- For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying.
- Do not use abrasive cleaners or solvents, as these may damage the finish.
- Ensure the magnetic surfaces are kept clean for optimal adhesion.
7. Troubleshooting
7.1 Phone Not Attaching Securely
- Check Magnetic Ring: Ensure the magnetic ring is properly installed and centered on your Android phone or non-MagSafe iPhone case.
- Clean Surfaces: Make sure both the phone's magnetic area (or attached ring) and the stand's magnetic ring are free from dust or debris.
- Case Compatibility: Thick phone cases may interfere with magnetic adhesion. Try removing the case or using a MagSafe-compatible case.
7.2 Stand Feels Loose or Sags
- Tighten Joints: Use the provided hexagonal wrench to gently tighten any loose screws at the pivot points of the cantilever brackets. Do not overtighten.
- Weight Limit: Ensure your phone is within the recommended size/weight limit (≤6.5 inches mobile phone).
8. Specifications

Image: Product Parameters
| Parameter | Value |
|---|---|
| Product Brand | TELESIN |
| Product Name | Magnetic mobile video/live streaming holder - desktop version |
| Product Material | Aluminum alloy |
| Base Size | 150*150 mm |
| Cantilever Size | 225*165 mm |
| Product Weight | ~1250g |
| Applicable Equipment | ≤6.5 inch mobile phone |
9. User Tips
- For optimal stability during overhead shots or drawing, ensure the stand's arm is extended and balanced.
- When using a magnetic cooler, position it carefully to avoid obstructing your phone's camera or other sensors.
- Experiment with different angles for live streaming and video calls to find the most flattering and professional setup.

Image: Professional Overhead Shots and Diverse Perspectives
10. Warranty and Support
TELESIN products are manufactured to the highest quality standards. For warranty information and customer support, please refer to the official TELESIN website or contact your local distributor. Keep your purchase receipt as proof of purchase.