Allsome BG-5157 Series

Contents

ALLSOME BG-5157 Series Mini Electric Bench Drill

Instruction Manual

1. Product Overview

The ALLSOME BG-5157 Series Mini Electric Bench Drill is a versatile and robust tool designed for precision drilling in various materials, including wood and metal. Its compact design and adjustable features make it ideal for home DIY projects and small workshops. This manual provides essential information for the safe and efficient operation of your bench drill.

ALLSOME BG-5157 Series Mini Electric Bench Drill
Figure 1: ALLSOME BG-5157 Series Mini Electric Bench Drill

2. Specifications

Please note that specifications may vary slightly depending on the specific model (880W, 1050W, or 1200W) within the BG-5157 series.

Feature Specification
Brand Name Allsome
Model Number BG-5157 (Series)
Rated Voltage 220V
Frequency 50/60Hz
Rated Input Power 880W / 1050W / 1200W (Varies by model)
No-Load Speed 0-800 r/min (1050W model), 0-2500 r/min (880W model)
Drill Clamping Diameter 3-16mm (1050W model), 1.5-13mm (880W model)
Max Spindle Travel 60mm
Drilling Capacity (1050W model) Iron Ø13mm, Wood Ø35mm
Weight (Product) Approx. 12.8 KG
Application Bench Drill, Drill Press for Home DIY
Power Source AC
Bench Drill Dimensions
Figure 2: Approximate Dimensions (Height 60cm, Base Width 32cm, Base Depth 20cm)
1050W Model Specifications
Figure 3: Specifications for 1050W Model (220V~ 50Hz 1050W, No-load Speed: 0-800r/min, Clamping diameter: 3-16mm, Work travel: 60mm, Drilling capacity: Iron Ø13mm, Wood Ø35mm)
880W Model Specifications
Figure 4: Specifications for 880W Model (Drill Clamping Diameter: 1.5-13mm, No-load Speed: 0-2500r/min, Max spindle travel: 60mm)

3. Setup

  1. Unpacking: Carefully remove all components from the packaging. Inspect for any damage during transit.
  2. Base Placement: Place the bench drill on a stable, level, and secure workbench. The cast iron base provides good stability.
  3. Securing the Drill: For enhanced safety and stability, it is recommended to bolt the drill's base to your workbench using appropriate fasteners (not included).
  4. Chuck Installation: Ensure the drill chuck is securely attached to the spindle. The chuck uses a B16 taper for accuracy.
  5. Accessory Attachment (Optional): If using compatible worktables (e.g., BG-6300, BG-6330, BG-6350) or vises (e.g., BG-6369, BG-6368, BG-518806, BG-6257), attach them according to their respective instructions. These accessories enhance precision and work holding capabilities.
    Compatible Worktables
    Figure 5: Compatible Worktables (BG-6350, BG-6330, BG-6300)
    Compatible Vises
    Figure 6: Compatible Vises (BG-6257, BG-6369, BG-518806, BG-6368)
  6. Power Connection: Connect the power cord to a suitable 220V AC power outlet.

4. Operating Instructions

  1. Insert Drill Bit: Open the chuck jaws using the chuck key. Insert the desired drill bit into the chuck, ensuring it is centered and tightened securely.
  2. Adjust Height: Loosen the pinch bolts that secure the main body to the column. Adjust the drill head to the desired height for your workpiece and re-tighten the pinch bolts firmly.
  3. Set Depth: Use the precise depth adjustment scale (Figure 7) to set the desired drilling depth. This ensures consistent hole depths.
    Depth Adjustment Scale
    Figure 7: Precise Adjustment of the Depth Scale
  4. Select Speed: Turn the 6-speed adjustment dial (Figure 8) to select the appropriate speed for your material and drill bit size. Higher speeds are generally for smaller bits and softer materials, while lower speeds are for larger bits and harder materials like metal.
    Speed Adjustment Dial
    Figure 8: 6-Speed Adjustment Dial and Power Switch
  5. Secure Workpiece: Always secure your workpiece firmly using a vise or clamps to prevent it from moving during drilling.
  6. Power On: Flip the power switch to the 'ON' position.
  7. Drilling: Use the feed handle to slowly and steadily lower the drill bit into the workpiece. Apply even pressure. Do not force the drill. Allow the drill bit to do the work.
    Video 1: Product Demonstration showing depth adjustment, speed adjustment, and drilling in wood and metal.

    The video demonstrates the ease of operation, including precise depth adjustment, 6-speed control, and effective drilling in both wood and metal. It highlights the smooth lowering action for fast and efficient drilling.

  8. Power Off: Once drilling is complete, raise the drill bit from the workpiece and flip the power switch to the 'OFF' position.

5. Maintenance

  • Cleaning: Regularly clean the drill press to remove dust, chips, and debris. Use a brush or compressed air. Ensure the machine is unplugged before cleaning.
  • Lubrication: Apply a light coat of machine oil to moving parts, such as the column and spindle, to ensure smooth operation and prevent rust.
  • Chuck Care: Keep the chuck jaws clean and free of debris. Periodically check the chuck for wear and tear. The B16 taper chuck can be replaced if necessary.
  • Power Cord Inspection: Inspect the power cord for any signs of damage (cuts, fraying). Replace immediately if damaged.
  • Storage: Store the drill press in a dry, clean environment when not in use.

6. Troubleshooting

  • Drill not powering on:
    • Check if the power cord is securely plugged into a live outlet.
    • Ensure the power switch is in the 'ON' position.
    • Verify that the circuit breaker has not tripped.
  • Excessive vibration or runout:
    • Ensure the drill bit is properly inserted and tightened in the chuck.
    • Check if the chuck itself is securely seated on the spindle taper.
    • Verify that the workpiece is firmly secured.
    • Inspect the drill bit for damage or bending.
  • Difficulty adjusting height:
    • Ensure the pinch bolts securing the main body to the column are sufficiently loosened.
    • Clean and lubricate the column if there is resistance.
  • Drill bit getting stuck or burning material:
    • Ensure you are using the correct speed setting for the material and drill bit.
    • Apply steady, even pressure; avoid forcing the drill.
    • Use sharp drill bits.
    • For metal, use cutting fluid.

7. User Tips

  • The drill's construction is noted for its sturdiness, with a cast iron base and secure mounting, minimizing play.
  • The chuck is attached using a B16 taper, which contributes to better accuracy. Users have reported low runout (e.g., 0.08mm on an attached drill bit and 0.02mm on the cone surface). The chuck is replaceable for even higher precision if needed.
  • The 6-speed adjustment provides a proper rotation range for various materials, including drilling in metal with larger bits. However, note that the speed dial is numeric (1-5) without a direct RPM conversion table, so some experimentation may be needed to find optimal settings.
  • While the pinch bolts for height adjustment are secure, they may require some effort to quickly change the drill head height.
  • The drill is capable of handling demanding tasks, such as drilling an 8mm hole in 25mm thick steel without issues.

8. Warranty and Support

For warranty information, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.