Introduction
Thank you for choosing the BSMOOM 7000A 26800mAh Car Jump Starter with Air Compressor. This versatile device is designed to provide reliable emergency jump-starting for your vehicle, inflate tires and other items, and serve as a portable power bank for your electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.
What's in the Box
Carefully unpack all components and check for any damage. If any item is missing or damaged, please contact customer support.
Image: Contents of the BSMOOM Jump Starter box, including the jump starter unit, Type-C USB cable, air nozzle accessories, smart jumper cable, air hose, and user manual.
- BSMOOM Jump Starter Unit
- Smart Jumper Cable
- Type-C USB Charging Cable
- Air Hose
- Air Nozzle Accessories (various types)
- User Manual
- Packing Box
Specifications
| Feature | Specification |
|---|---|
| Brand Name | YUSMAN (also marketed as BSMOOM) |
| Peak Current | >1200 A (up to 7000A/8000A for starting) |
| Special Features | Lighting, Warning Light, SOS Lighting, Air Compressor |
| Voltage | 12 V |
| Conversion Rate | 85%~90% |
| Battery Capacity | 26800 mAh (available in 21800mAh and 26800mAh variants) |
| External Testing Certification | CE |
| Number Of Built-in Batteries | 4 |
| Origin | Mainland China |
| Max Air Compressor Pressure | 160 PSI |
| Emergency Light Output | 400 Lumens |
Safety Information
WARNING: Improper use of this device can result in injury or damage to the device or vehicle. Always follow these safety guidelines.
- Do not allow the positive and negative clamps to touch each other.
- Do not jump start a frozen battery.
- Ensure the battery clamps are securely connected to the correct terminals.
- Do not expose the device to extreme temperatures (above 60°C or below -20°C).
- Keep out of reach of children.
- Do not disassemble the unit.
- If the device becomes excessively hot during use, discontinue operation immediately.
- Always wear eye protection when working with batteries.
Image: All-Round Safety Protection features including Reverse Polarity, Reverse Connection, Over Current, Over Voltage, Over Charge, Over Load, Over Discharge, Short Circuit, High Temperature Protection, and Spark-Proof Protection.
Setup
Initial Charging
Before first use, fully charge the jump starter. Connect the included Type-C USB cable to the 'U-C IN' port on the device and to a suitable USB power adapter (not included). The LED screen will indicate the charging status and battery level. A full charge is recommended for optimal performance.
Understanding the Display
Image: Sunlight-readable 2.16 inch clear LED screen display. Labels indicate: 1. Real-Time Value, 2. Charging mode (U-C IN / USB OUT), 3. Power (battery level indicator), 4. Inflatable mode (car, motorcycle, bicycle, basketball icons), 5. Inflatable unit (PSI, BAR, KPA, Kg/cm²).
The 2.16-inch LED screen provides clear information:
- Real-Time Value: Displays current pressure or battery percentage.
- Charging Mode: Indicates if the device is charging (U-C IN) or discharging (USB OUT).
- Power: Shows the remaining battery level.
- Inflatable Mode: Icons for Car, Motorcycle, Bicycle, and Basketball indicate the selected inflation preset.
- Inflatable Unit: Displays the pressure unit (PSI, BAR, KPA, Kg/cm²).
Operating Instructions
1. Jump Starting a Car
Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.
Image: Car Start Display showing three steps: Step 1: Insert the smart jumper cable plug into the jump starter. Step 2: Connect the red clamp to the car battery's positive (+) terminal and the black clamp to the negative (-) terminal. Step 3: Start the car engine.
- Insert the Plug: Insert the smart jumper cable's blue plug firmly into the jump starter's 12V output port.
- Connect the Clamps: Attach the red (+) clamp to the positive terminal of the car battery. Attach the black (-) clamp to the negative terminal of the car battery. Ensure a good connection. The smart jumper cable indicator light will show status.
- Start the Engine: Once the smart jumper cable indicator is solid green, start your car's engine.
- Remove Clamps: After the car starts, immediately remove the clamps from the car battery, then disconnect the smart jumper cable from the jump starter.
Force Start Function (for completely dead batteries)
If the smart jumper cable indicator does not turn green, your car battery might be completely dead. Use the force start function:
Image: Force Start Function showing three steps: Step 1: Connect the clamps to the car battery. Step 2: Press and hold the force start button on the smart jumper cable for more than 3 seconds. Step 3: Start the car engine.
- Connect Clamps: Connect the smart jumper cable clamps to the car battery terminals as described above.
- Activate Force Start: Press and hold the 'Force Start' button on the smart jumper cable for more than 3 seconds. The indicator light will turn solid green.
- Start Engine: Start the car engine within 30 seconds.
- Remove Clamps: Immediately remove the clamps after the car starts.
Vehicle Compatibility: This jump starter is suitable for a wide range of vehicles, including Lawn Mowers (1.5L), Motorcycles (2.5L), Cars (3.5L), SUVs (7.5L), and RVs (10.0L Diesel).
Image: Instantly Jump Start Your Car, showing compatibility with various vehicles and engine sizes: Lawn Mower 1.5L, Motorcycle 2.5L, Car 3.5L, SUV 7.5L, RV 10.0L Diesel. It also indicates 8000A Current, ALL Gas, 10.0L Diesel, and Force Start Function.
2. Using the Air Compressor
The integrated air compressor can inflate tires, bicycle tires, sports balls, and more, up to 160 PSI.
Image: Inflate Function Display showing three steps: Step 1: Connect the air hose to the jump starter and the item to be inflated. Step 2: Press the 'OK' key and then the 'M' button to switch to the corresponding inflation mode (car, motorcycle, bicycle, basketball). Step 3: Press the '+' and '-' buttons to adjust the target air pressure. Press 'OK' to start inflation.
- Connect Air Hose: Screw the air hose onto the air output port of the jump starter. Attach the appropriate air nozzle accessory to the other end of the hose and connect it to the item you wish to inflate.
- Select Mode: Press the 'OK' button to activate the display. Then press the 'M' button to cycle through the inflation modes (Car, Motorcycle, Bicycle, Basketball) until the desired icon is selected.
- Adjust Pressure: Use the '+' and '-' buttons to set the target air pressure. The display will show the real-time pressure.
- Start Inflation: Press the 'OK' button again to start the inflation. The compressor will automatically stop once the target pressure is reached.
- Disconnect: Disconnect the air hose and nozzle from the item and the jump starter.
Image: Expeditious Air Compressor, highlighting its 160PSI capability and suitability for multiple inflation modes, including car tires, bicycles, and basketballs.
3. Using as a Portable Power Bank
The jump starter can charge your electronic devices via its USB output port.
Image: Portable power bank feature, showing the device with Type C Input and USB Output, fast charging a smartphone.
- Connect Device: Connect your device's charging cable to the USB OUT port on the jump starter.
- Start Charging: The jump starter will automatically begin charging your device. The display may show 'USB OUT'.
- Monitor Battery: Keep an eye on the jump starter's battery level to ensure it doesn't drain completely.
Image: A man sitting in a car, charging his phone using the portable power bank function of the jump starter.
4. Using Emergency Lights
The device features a powerful 400 Lumen LED light with multiple modes.
Image: 400 Lumen Emergency Lights, illustrating Flashlight, Strobe, and SOS modes.
- Turn On/Off: Press the light button (often indicated by a sun or lightbulb icon) to turn on the flashlight.
- Cycle Modes: Press the light button repeatedly to cycle through Flashlight, Strobe, and SOS modes.
- Turn Off: Press the button again after SOS mode to turn off the light, or hold the button down for a few seconds.
Maintenance
Charging
- Recharge the jump starter after each use, especially after jump-starting a vehicle or using the air compressor extensively.
- For optimal battery life, recharge the device every 3-6 months if not in regular use.
- Use only the provided Type-C USB cable for charging.
Storage
- Store the device in a cool, dry place, away from direct sunlight and moisture.
- Keep the device charged to at least 50% when storing for extended periods.
- Ensure all ports are clean and free of debris.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car won't jump start | Low jump starter battery; incorrect clamp connection; completely dead car battery. | Ensure jump starter is fully charged. Check clamp polarity and secure connection. Try the 'Force Start' function if the car battery is completely dead. |
| Air compressor not inflating | Air hose not connected properly; incorrect pressure setting; low jump starter battery. | Check air hose connections. Verify target pressure is set. Recharge jump starter. |
| Device not charging phone | Low jump starter battery; faulty USB cable; device not recognized. | Recharge jump starter. Try a different USB cable. Ensure the phone is compatible with USB charging. |
| LED screen not working | Device off; low battery; internal fault. | Press any button to wake the screen. Recharge the device. If problem persists, contact support. |
User Tips
- Pre-charge for Reliability: Always ensure your jump starter is fully charged, especially before long trips. A fully charged unit provides the best performance for jump-starting even a deeply discharged car battery.
- Check Car Battery Condition: While powerful, if your car battery has been sitting for a very long time and is completely dead, the 'Force Start' function may be necessary. Follow the instructions carefully.
- Multi-purpose Convenience: Don't forget to utilize the air compressor for bicycle tires or sports equipment, and the power bank for charging your phone on the go. It's a true all-in-one emergency tool.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided by your seller or on the product packaging. Keep your purchase receipt as proof of purchase.