realme Buds T200 Lite True Wireless Earphones User Manual

1. Product Overview

The realme Buds T200 Lite are advanced True Wireless Stereo (TWS) earphones designed for an immersive audio experience and clear communication. They feature AI Deep Call Noise Cancellation, a powerful 12.4mm Dynamic Bass Driver, and robust Bluetooth 5.4 connectivity. With an extended battery life and IPX4 water resistance, these earbuds are built for daily use and active lifestyles.

2. Package Contents

Before you begin, please check the contents of your realme Buds T200 Lite package:

• realme Buds T200 Lite Earbuds (1 Pair)
• Charging Case (1 Unit)
• User Guide and Warranty Card (1 Unit)
• Earbud Tips (S/M/L) (3 Pairs, M tips installed by default)
• Charging Cable (Type-C)

3. Setup

3.1 Initial Charging

1. Place both earbuds into the charging case.
2. Connect the Type-C charging cable to the charging port on the case and to a power source.
3. The indicator light on the charging case will show charging status. A full charge for both the case and earbuds takes approximately 120 minutes.
4. For quick use, a 10-minute charge can provide up to 5 hours of playback.

3.2 Pairing with a Device

1. First-time Pairing: Open the charging case. The earbuds will automatically enter pairing mode.
2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "realme Buds T200 Lite" from the list to connect.
4. Once connected, the earbuds will automatically pair with your device when taken out of the case.
5. Dual-device Connection: The earbuds support simultaneous connection to two devices. Refer to your device's Bluetooth settings or the realme Link app for managing dual connections.

3.3 Earbud Fit

For optimal sound quality and comfort, choose the ear tips that best fit your ears. The package includes Small (S), Medium (M), and Large (L) ear tips. Medium tips are pre-installed.

4. Operating Instructions

4.1 Touch Controls

The realme Buds T200 Lite feature intuitive touch controls. Specific gestures (e.g., single tap, double tap, triple tap, long press) can be customized via the realme Link app for functions such as:

• Play/Pause music
• Skip tracks (Next/Previous)
• Answer/End calls
• Activate voice assistant
• Switch between noise cancellation modes (if applicable)

4.2 Call Functions

The earbuds are equipped with Dual-mic AI Deep Call Noise Cancellation, ensuring clear calls even in noisy environments. This technology uses DNN voice recognition to create a noise-proof calling bubble.

4.3 Audio Playback

Enjoy high-quality audio with AAC and SBC codecs. The 12.4mm Dynamic Bass Driver delivers powerful and immersive sound.

4.4 Ultra-low Latency

The earbuds offer ultra-low latency, providing a real-time audio experience, especially beneficial for gaming and video playback.

5. Maintenance

5.1 Cleaning

• Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
• Remove ear tips and clean them with water and mild soap if necessary, ensuring they are completely dry before reattaching.
• Gently clean the charging contacts on both the earbuds and inside the case to ensure proper charging.

5.2 Water Resistance

The realme Buds T200 Lite are rated IPX4 for water resistance, meaning they are protected against splashing water from any direction. This makes them suitable for workouts and light rain. However, they are not designed for swimming or showering. Do not submerge the earbuds in water.

6. Troubleshooting

• Earbuds not pairing: Ensure both earbuds are in the charging case, then open the lid to enter pairing mode. Check your device's Bluetooth settings and try reconnecting.
• Only one earbud working: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again. This often resets the connection.
• Poor sound quality: Ensure the ear tips provide a good seal in your ear. Clean any debris from the earbud nozzles. Check your device's audio settings and ensure the earbuds are within Bluetooth range.
• Charging issues: Clean the charging contacts on both the earbuds and the case. Ensure the charging cable and power source are working correctly.
• Connectivity drops: Ensure there are no major obstructions between your device and the earbuds. Keep the earbuds within the 10m connection range.

7. Specifications

8. User Tips

• Optimal Fit: Experiment with the different ear tip sizes (S/M/L) to find the best fit for your ears. A good seal enhances sound quality and noise cancellation effectiveness.
• Regular Cleaning: Keep your earbuds and charging case clean to maintain hygiene and ensure consistent performance, especially the charging contacts and earbud mesh.
• Firmware Updates: Check the realme Link app periodically for firmware updates. These updates can improve performance, add new features, and fix bugs.
• Battery Preservation: While the earbuds have durable battery health, avoid fully draining the battery frequently to prolong its lifespan.
• App Customization: Utilize the realme Link app to customize touch controls, check battery status, and access other advanced settings for a personalized experience.

9. Warranty & Support

Your realme Buds T200 Lite come with a User Guide and Warranty Card included in the box. Please refer to the Warranty Card for detailed information regarding warranty terms and conditions.

For technical support, service, or further inquiries, please contact the official realme customer service or the retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.