1. Introduction
The MatSee Plus Tuya Smart Life ZigBee Energy Meter is a smart device designed to monitor electricity consumption and generation in real-time. It utilizes ZigBee technology for communication and integrates seamlessly with the Tuya Smart Life application, allowing users to track various electrical parameters and create smart automation scenes. This manual provides detailed instructions for the safe installation, setup, operation, and maintenance of your energy meter.
2. Safety Information
WARNING: Failure to follow these instructions may result in death or serious injury.
- The power clamp must be installed and serviced only by qualified electrical personnel.
- Do not touch the terminals of the device during testing.
- Turn off all power supply for this equipment before installing.
- Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
- Always use a properly rated voltage sensing device to confirm power is off.

3. Specifications
| Parameter | Value |
|---|---|
| Input Voltage | AC 100-240V 50/60Hz |
| Measuring Range | 0.2 - 80A |
| Wireless Frequency | 2.4GHz |
| Error Margin | Within ±2% |
| Module Size | 50 x 45 x 23mm |
| Clamp Diameter | 10mm |
| Clamp Cable Length | 1m |
| Working Temperature | -10 °C ~ +55 °C |
| Communication Method | Zigbee |
| State of Assembly | Ready-to-Go |
| Compatibility | All Compatible (with Tuya Gateway) |
| Certification | CE, RoHS |
| Protocol | Zigbee |
| Requirement | Tuya Gateway |

4. Package Contents
Your package should contain the following items:
- 1 x Tuya Smart Life ZigBee Energy Meter Module
- 1 or 2 x Current Transformer (CT) Clamps (depending on the model purchased)

5. Setup and Installation
5.1. Download the App
To use the energy meter, you need to download either the 'Smart Life' or 'Tuya Smart' application on your smartphone. Scan the QR codes below or search for the apps in your device's App Store, Google Play, or Android Market.


5.2. Tuya ZigBee Gateway Requirement
Important: This is a ZigBee device and cannot connect directly to your Wi-Fi network. It requires a Tuya ZigBee Gateway (hub) to function properly. Ensure you have a compatible Tuya ZigBee Gateway set up before proceeding.

5.3. Add the ZigBee Meter to the App
- Ensure your Tuya ZigBee Gateway is powered on and connected to the internet.
- Open the Smart Life or Tuya Smart app.
- Navigate to your ZigBee Gateway in the app.
- Press the reset button on the energy meter module for approximately 5 seconds until the red LED indicator flashes quickly.
- In the app, select 'Add subdevice' under your ZigBee Gateway.
- Confirm that the device is in pairing mode (LED blinking).
- The app will search for and add the device. Once successfully added, click 'Done'.
5.4. Wiring Diagram
Before wiring, ensure the main power supply is OFF. Incorrect wiring can cause damage to the device or electrical shock.
Note: When installing, please ensure that the circuit measured by the CT clamp is in the same phase as the circuit powering the energy meter module.
5.4.1. Measuring Energy Consumption and Generation (Solar Power)

5.4.2. Measuring Power Consumption (1 or 2 Channels)


5.5. Non-Connect Installation of CT Clamps
The CT clamps are designed for easy and safe non-contact installation. Simply place the wire you wish to measure inside the clamp. No need to cut or modify existing wiring.

5.6. CT Clamp Direction
For accurate readings, the direction of the CT clamp is crucial, especially for solar power monitoring:
- If your solar system is working (generating power), adjust the clamp's direction until the App shows 'Reverse'.
- If your solar system is not working (consuming power from the grid), adjust the clamp's direction until the App shows 'Forward'.
Perform this adjustment for each channel.

6. Operation
6.1. Monitoring Electricity Usage
Once installed and connected, you can monitor various electricity parameters through the Smart Life or Tuya Smart app:
- Real-time Data: View total power, current (mA), voltage (V), power factor, and frequency (Hz) for both Channel A and Channel B, as well as overall forward and reverse energy.
- Electricity Statistics: Access historical data including hourly, daily, monthly, and yearly electricity consumption (KWh) for each channel and total, in both forward and reverse directions.

6.2. Calibration
The app allows for calibration of various parameters to ensure accuracy. You can adjust reporting frequency, voltage, frequency, current, power, and energy (forward/reverse) for each channel independently.

6.3. Automation and Scene Creation
Leverage the smart features of the Tuya ecosystem by creating automation scenes. You can set conditions based on the energy meter's readings (e.g., if power or current exceeds a certain value) to trigger actions in other Tuya-compatible devices.


7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Connection Check: Periodically inspect all wiring connections to ensure they are secure and free from damage.
- Environment: Ensure the device is kept in a dry environment, away from direct sunlight and extreme temperatures.
8. Troubleshooting
- Q: Why can't my device connect to 2.4G WiFi?
- A: This is a ZigBee device. It cannot connect to a Wi-Fi signal directly. It requires a Tuya ZigBee Gateway as a hub to work. Please ensure you have a Tuya ZigBee Gateway.
- Q: Is it a ZigBee 3.0 standard item?
- A: No. It's a Tuya ZigBee device, not strictly ZigBee 3.0 standard. It is designed to work specifically with a Tuya ZigBee Gateway.
- Q: Is this device compatible with Zigbee2MQTT?
- A: Yes, it is compatible. However, you may need to install a specific quirk for it to function correctly. The internal ID is _TZE284_81yrt3lo. A common quirk can be found at 'github.com/jeverley/zha-device-handlers/blob/ts0601_energy_meter_devices/zhaquirks/tuya/ts0601_energy_meter.py'.
- Q: Is this device compatible with Home Assistant?
- A: It is not directly compatible. You need to configure it with Zigbee2MQTT first, and then it can work with Home Assistant. If you are unsure how to configure it, please use the Tuya Smart or Smart Life APP for easier setup.
- Q: Does the equipment have an overload alarm function?
- A: No, this device does not support an overload alarm function.
- Q: After I configure it with the App, why does the App show 'the Current and Power as '0'' or 'shutdown'?
- A: The clamp needs to sense current to display values. Ensure that a device's wire (either live wire or neutral wire, but not both) is correctly placed within the CT clamp, and the device connected to that wire is turned on and actively consuming power.
- Q: After I change the report rate to less than 10 seconds, why does my App seem stuck?
- A: This issue typically occurs due to slow network return. Please sign out of the App and then re-enter to change the report rate back to 10 seconds. This should resolve the issue.
- Q: How do I clear App electricity data?
- A: Quickly press the reset button on the module 5 times. The indicator LED will blink rapidly. If it fails to blink, repeat the action until it does. After 10 seconds, go to the device page in the App and select 'Disconnect and wipe data'.
- Q: I suppose P=U*I, why is the power value shown on the App not always accurate based on this formula?
- A: The calculation for real power in AC circuits also needs to consider the power factor (cos(Φ)). The formula for real power is P = V * I * cos(Φ) Watts (W). The App displays real power, which accounts for the phase difference between voltage and current waveforms.
9. User Tips
- Always ensure you have a Tuya ZigBee Gateway before purchasing or attempting to set up this energy meter.
- For advanced users interested in Zigbee2MQTT or Home Assistant integration, be prepared for manual configuration and potentially installing specific software quirks.
- Pay close attention to the CT clamp direction during installation, especially for solar power monitoring, to ensure accurate forward and reverse energy readings.
- If you experience app unresponsiveness after adjusting the reporting frequency, revert the setting to 10 seconds.
10. Warranty and Support
We guarantee the quality of our products. Every unit undergoes thorough testing before delivery to ensure functionality and reliability.

For any questions or support needs, please contact us:
- Email: sophie@matseeplus.com
For more detailed instructions and technical documents, please refer to the official user manual (PDF) available at User manual (PDF).