1. Introduction
This manual provides essential information for the safe and efficient operation of your Feyree Type2 16A 3.5kW Portable EV Charger. Please read this manual thoroughly before using the product and keep it for future reference.
Video: Overview of the Feyree Portable EV Charger.
2. Safety Precautions
It is crucial to adhere to all safety guidelines to prevent injury, damage to the product, or property. Failure to follow these instructions may result in serious injury or death.
General Safety Rules:
- Avoid immersing the AC charging connection device in water.
- Do not step on, pull, bend, or knot the charging cable.
- Do not insert foreign objects into any part of the charging vehicle connector.
- Refrain from dropping the control box or placing heavy objects on its surface.
- Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
- Ensure the operating ambient temperature of the equipment remains within the range of -30 °C to +55 °C.
- Don't use the charger when you, the vehicle, or the charger is exposed to severe rain.
- Do not use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
- Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
- Do not attempt to open, disassemble, repair, tamper with, or modify the charger.
- This product is exclusively designed for electric vehicle charging purposes.
- Avoid using external wires or adapters.
- This product must be well-grounded when used.
- Never insert your fingers into the charging plug.
- The EV charger is not user serviceable. Contact customer support for any repairs.
- If the device fails to charge normally as per the operation manual, please contact the seller or consider a replacement.
- Never allow children to play with the charger cable.
- To avoid the risk of fire or electric shock, do not use this device with an extension cord.
- Using a worn or damaged AC outlet may cause burns or start a fire.
- Risk of explosion. This equipment has an arc or sparking parts that should not be exposed to flammable vapors.
- Risk of electric shock. Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside. Refer servicing to qualified personnel.
Before Starting Charging:
- It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. Installation must comply with local codes.
- This product must be grounded. Grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.
- Ensure the power plug and socket are compatible before initiating the charging process.
- Do not charge if the socket is damaged, rusty, cracked, or has a loose connection. If the socket is dirty or wet, disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from any debris.
- Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.
3. Product Overview
The Feyree Portable EV Charger is designed for convenient and reliable electric vehicle charging. It features an LCD screen for real-time status monitoring and adjustable current settings.



Control Box Functions:
- Leakage protection
- Over-voltage and under-voltage protection
- Lightning protection
- Over-current protection
- Overheat protection
- Grounding protection
- Overload protection
Product Performance:
- Insulation resistance: > 1000 Ω
- Terminal temperature rise: <50K
- Mechanical life: Charging Plug plugging and unplugging times (Non operating state)>10000 times
- External impact: Charging Plug can withstand a 1-meter drop and 2 tons of vehicle crushing
- Pin: copper alloy, silver plated
What's in the Box:
- EV Charger x 1
- Portable Control Box x 1
- 5m Cable x 1
- Schuko Plug x 1
- Bag x 1 (Gift)
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | feyree |
| Charger Type | Portable Charger |
| Origin | Mainland China |
| Material | PC+ABS |
| Type | Type2 / Type1 / GBT |
| Number of phases | Single Phase |
| Capacity | 3.5KW |
| Current | 8A/10A/13A/16A adjustable |
| Voltage | 85V-264V |
| Item Weight | 2kg |
| Control Box Height | 215mm |
| Control Box Width | 88mm |
| Control Box Depth | 47mm |
| Operating Temperature | -30°C ~ +55°C |
| Storage Temperature | -40°C ~ +80°C |
| Operating Humidity | 5% ~ 95% (non-condensation) |
| Protection Degree | IP65 (Type 2) / IP66 (Type 1, GBT) |
| Cable Length | 5m |



5. Setup Instructions
Choosing a Suitable Charging Plug:


Initial Connection:
- Insert Power Plug: Firmly insert the power plug into the outlet.
Note: The control box rated current under 10A can use a 10A socket; otherwise, over 10A should use a 16A socket. Ensure the power-supply side outlet complies with CEE 7-Std standard.
- Connect to Vehicle: Pull the cap lightly and insert the charging connector completely into your vehicle's outlet.
Make sure the plug is fully inserted into the socket until you hear a "click".
6. Operating Instructions
Adjusting Current and Setting Delayed Charging:

- Adjust Current (Button A): Tap button "A" to adjust the current before charging. Available settings are 8A, 10A, 13A, and 16A.
Caution: The charging current set shouldn't be higher than the supply current, otherwise there may be a safety hazard. The device cannot adjust the current during charging.
- Set Delayed Charging Time (Button D): Tap button "D" to set a delayed charging time from 1 to 15 hours.
Note: Electric vehicles are required to support delayed charging for this feature to work.

Figure 10: Save money by delaying charging to off-peak hours. Your EV must support delayed charging.
Ending Charging:
There are three methods to end charging:
- Plan A (Automatic Stop): The charger will automatically stop charging when the car is fully charged. You can then directly unplug it.
- Plan B (Power Switch): Turn off the power switch to end charging, then unplug the charger.
- Plan C (Vehicle Control): Stop vehicle charging first by locating the stop charging button or switch inside the vehicle or next to the door of the electric vehicle. Touch or press it to stop charging. Then unplug the charger connector.
Warning: Do not unplug the charger during an active charging session without first stopping the charging process via one of the methods above.
7. LCD Display Guide
The 1.8-inch LCD screen provides real-time information about the charging status.

Status of LED Display:
| Serial No. | Control Box Status | LED1 | LED2 | LED3 | LED4 | LED5 | LED6 |
|---|---|---|---|---|---|---|---|
| 1 | Standby (Green Light) 8A | Constant Light | |||||
| 2 | Standby (Green Light) 10A | Constant Light | Constant Light | ||||
| 3 | Standby (Green Light) 13A | Constant Light | Constant Light | Constant Light | |||
| 4 | Standby (Green Light) 16A | Constant Light | Constant Light | Constant Light | Constant Light | ||
| 5 | Wait For Connection (Green Light) | Breathing Light | Breathing Light | Breathing Light | Breathing Light | Breathing Light | Breathing Light |
| 6 | Charging (Green Light) | Flowing Light | Flowing Light | Flowing Light | Flowing Light | Flowing Light | Flowing Light |
| 7 | Charge Complete (Blue Light) | Constant Light | Constant Light | Constant Light | Constant Light | Constant Light | Constant Light |
| 8 | CP error | Constant Light | Constant Light | Constant Light | Constant Light | Constant Light | Constant Light |
| 9 | Overvoltage Warning (Red Light) | Flashing Light | Flashing Light | ||||
| 10 | Undervoltage Warning (Red Light) | Flashing Light | Flashing Light | ||||
| 11 | PE Warning (Red Light) | Constant Light | Constant Light | ||||
| 12 | Electric Leakage Warning (Red Light) | Constant Light | Constant Light | ||||
| 13 | Overcurrent Warning (Red Light) | Flashing Light | Flashing Light | Flashing Light | Flashing Light | Flashing Light | Flashing Light |
| 14 | Overheat (Red Light Flashing) | Flashing Light | Flashing Light | ||||
| 15 | CP Short Circuit (Red Light) | Constant Light | Constant Light | Constant Light | Constant Light |
8. Maintenance
- Regularly inspect the charging cable, control box, and plugs for any signs of wear, damage, or corrosion.
- Keep the charger clean and dry. If the charging plug or socket becomes dirty or wet, disconnect power and wipe with a dry, clean cloth before use.
- Store the charger in a dry environment, away from extreme temperatures and direct sunlight.
- Do not attempt to repair or modify the charger yourself. All servicing should be performed by qualified personnel.


9. Troubleshooting
Refer to the table below for common issues and their recommended solutions.
| Fault Name | Reason for Failure | Recommendations |
|---|---|---|
| Over Voltage | AC input voltage is too high |
|
| Under Voltage | AC input voltage is too low |
|
| Over Current | AC input current is too high |
|
| Over TEMP | Charger internal temperature greater than 85°C |
|
| Elec leakage | Leakage is greater than the following values: TypeA:60Hz:AC 20mA, 50Hz:AC 30mA |
|
| PE Fault | Poor grounding or incorrect wiring |
|
| Err:cp | Charging plug CC/CP connection abnormality |
|
10. User Tips
- Cable Management: While the cable is robust, some users note it can be stiff. Ensure it is uncoiled properly before use to avoid kinks and facilitate connection.
- Screen Readability: The LCD screen provides useful information. Familiarize yourself with the display indicators for real-time monitoring. If readings appear inconsistent, verify your vehicle's status or consult the troubleshooting section.
- Plug Material: The charging gun is made of high-quality metal. In cold weather, be mindful that metal can be cold to the touch.
- Grounding Check: Always ensure proper grounding of your electrical outlet to prevent potential issues.
11. Warranty & Support
Customer Service Team:
E-mail: tina@feyree.com
Two-Year Warranty:
Feyree offers a two-year warranty to customers who have purchased an original Feyree product.
Lifetime Technical Support:
In case of any product-related issues, we encourage you to reach out to us, providing pictures and videos for further assistance.
Exclusions:
The warranty does not cover:
- Any product damage resulting from failure to follow the recommended guidelines.
- Damage caused by unauthorized disassembly of the machine or seeking maintenance from a non-designated service center.
- Purchased non-original Feyree products.
- Any modifications or do-it-yourself alterations carried out without guidance from a licensed electrician.
12. FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antennas.
13. Additional Resources
A user manual in PDF format is available for download: Feyree Portable EV Charger User Manual (PDF).