ENJOYWOOD 700mm Woodworking Router Table Fence System

1. Introduction

Thank you for choosing the ENJOYWOOD 700mm Woodworking Router Table Fence System. This system is designed to provide stable, reliable, and safe operation for your woodworking routing tasks. Made from durable aluminum alloy, it features a 700mm fence, 300mm T-track sliding brackets, an adjustable bit guard, and an efficient dust collection system. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and safety.

2. Safety Information

Always prioritize safety when operating woodworking machinery. Failure to follow safety guidelines can result in serious injury.

• Read and understand all instructions before assembly and operation.
• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and dust mask.
• Ensure your router table is stable and securely mounted before attaching the fence system.
• Keep hands clear of the router bit during operation.
• Always disconnect power to the router before making adjustments or changing bits.
• Ensure all fasteners are tightened securely before use.
• Use the bit guard and other safety features provided.
• Maintain a clean and well-lit work area.

3. Package Contents

Carefully unpack the box and verify that all items listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Figure 1: Overview of package contents.

• 1 x 700mm Fence
• 2 x 300mm T-track
• 2 x Fence Stop
• 2 x Bracket
• Necessary fasteners and hex keys (included with product)

4. Specifications

Figure 2: Key dimensions of the fence and T-track.

5. Assembly and Setup

Follow these steps to assemble and set up your router table fence system:

1. Prepare the Router Table: Ensure your router table has appropriate slots for mounting the T-tracks. The system is designed to be used with most models of router tables or custom-built consoles. The console should have grooves with a depth of 13mm and a width of 45.1mm for optimal fit.
   

   Figure 3: Router table plate with T-track grooves.

2. Install T-tracks: Secure the two 300mm T-tracks onto your router table using appropriate fasteners. These tracks will allow the fence to slide and be positioned accurately.
3. Attach the Fence: Position the 700mm fence onto the T-tracks. The fence is designed with brackets that slide along the T-tracks. Secure the fence to the T-tracks using the provided knobs.
   

   Figure 4: Fence system installed on a router table.

4. Install Fence Stops and Brackets: Attach the fence stops and additional brackets as shown in the diagram. These components help secure the fence and provide additional functionality.
   

   Figure 5: Labeled components of the fence system.

5. Adjust Verticality: Use a hex key to adjust the verticality of the backside and console of the fence. This ensures the fence is perfectly perpendicular to the router table surface. Tighten the screws once adjusted.
   

   Figure 6: Adjusting fence verticality.

6. Adjust Dust Collector Size: The middle dust collector features sliding panels. Adjust these panels to match the size of your router bit and workpiece for optimal dust extraction. Secure the panels in place.
   

   Figure 7: Adjusting the dust collector opening.

7. Adjust Bracket Range: The brackets can be adjusted to range from 0mm to 10mm, allowing for fine-tuning of the fence position relative to the router bit. Use the adjustment knob to set the desired offset.
   

   Figure 8: Adjusting the bracket range.

8. Connect Dust Collection: Attach a standard dust collection hose to the central dust port. The system includes adapters for various hose diameters (63.5mm, 50mm, 35mm, 38mm, 32mm) to ensure compatibility with your dust collection system.
   

   Figure 9: Dust collection port and adapters.

6. Operation

The ENJOYWOOD Router Table Fence System provides stable and precise guidance for your routing operations.

• Positioning the Fence: Loosen the locking knobs on the T-track brackets and slide the fence to the desired position relative to your router bit. Use the integrated measurement tape for accurate placement. Tighten the knobs securely before operation.
• Using the Bit Guard: The transparent bit guard provides a clear view of the workpiece while offering protection from the spinning router bit. Ensure it is properly positioned for your specific operation. For certain operations, the safety baffle (bit guard) can be removed if necessary, but always exercise extreme caution.
• Feather Board Compatibility: The side of the fence is designed with brackets that allow for flexible use with a variety of tools, such as feather boards, to enhance stability and control during routing.
  

  Figure 10: Using the fence with a feather board.

• Dust Collection: Always use the dust collection system during operation to maintain a clean work environment and improve visibility. The central dust collection design is powerful and direct.
• Flip Stop: Utilize the flip stop for repeatable cuts and precise workpiece positioning.

7. Maintenance

Regular maintenance will prolong the life and ensure the accuracy of your router table fence system.

• Cleaning: After each use, clean the fence, T-tracks, and dust collection port to remove sawdust and debris. A dry cloth or compressed air is recommended.
• Inspection: Periodically inspect all components for wear, damage, or loose fasteners. Tighten any loose screws or bolts.
• Lubrication: Lightly lubricate the sliding mechanisms of the T-tracks and adjustment brackets with a dry lubricant to ensure smooth operation.
• Storage: Store the fence system in a clean, dry environment when not in use to prevent corrosion and damage.

8. Troubleshooting

Here are some common issues and their solutions:

9. User Tips

• Check Compatibility: Before purchasing or attempting to install, verify that your existing router table or console has the necessary mounting options and dimensions (e.g., groove depth 13mm, slot width 45.1mm) to accommodate this fence system. This product is a fence system and does not include a router table or router mounting plate.
• Inspect Upon Arrival: Upon receiving your package, carefully unpack and inspect all components. Users have noted the high quality of materials and thorough packaging, but it's always good practice to confirm everything is present and undamaged.
• Precision is Key: This fence system is designed for precision. Take your time during setup to ensure all adjustments (verticality, bracket range) are accurate for the best results.
• Utilize Accessories: The flexible design allows for integration with other woodworking tools like feather boards. Experiment with these accessories to enhance safety and control for various routing tasks.

10. Warranty and Support

For any issues, questions, or support needs regarding your ENJOYWOOD Router Table Fence System, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

We are committed to providing the best customer service and will do our best to resolve any problems you may encounter.