staniot LoRa PR200

Contents

Staniot LoRa Version Wireless PIR Motion Detector

Model: LoRa PR200

1. Introduction

The Staniot LoRa Version Wireless PIR Motion Detector (Model: LoRa PR200) is an advanced human presence sensor designed to enhance the security of your home or property. Utilizing LoRa technology, it offers a long communication distance of up to 500 meters, ensuring stable and reliable connectivity with your security system. This detector features low power consumption for extended battery life, a wide 110° detection angle, and an anti-dismantling alarm for added security. It is specifically designed to work with the Staniot Secpanel 7 Pro alarm system.

Staniot LoRa PIR Motion Detector front view
Figure 1: Staniot LoRa Version Wireless PIR Motion Detector

2. Safety Information

  • Read all instructions carefully before installation and use.
  • Keep the device away from water and excessive humidity.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
  • Ensure batteries are inserted with correct polarity.
  • Dispose of used batteries according to local regulations.

3. Key Features

  • LoRa Technology: Provides strong penetration and fully encrypted communication for stable connections.
  • Extended Communication Range: Up to 500 meters wireless distance with the security panel.
  • Motion Detection: Detects human presence within its 110° wide-angle field.
  • Low Power Consumption: Ensures longer battery life for continuous operation.
  • Anti-Dismantling Alarm: Triggers an alarm if the device is tampered with.
  • Toggleable Indicator Light: Allows control over the LED indicator.
  • Adjustable Trigger Time: Configurable detection trigger duration (5 seconds or 5 minutes).
  • Instant APP Alerts: Sends signals to the security host upon detection, which can then send app notifications.
Staniot LoRa PIR Motion Detector mounted, highlighting features
Figure 2: Key features of the Motion Detector

4. Specifications

ParameterValue
Model NumberLoRa PR200
Brand Namestaniot
CertificationCE, RoHS
Smart Home PlatformTuya
Wireless ParametersLoRa
Wireless Distance500m (communication distance with security panel)
Detection Angle110°
Battery SpecificationAA battery × 2
Standby Current≤10µA
Alarm Current≤15mA
Working Temperature-10°C ~ +50°C
Relative Humidity<95% (no condensation)
Product Size50 × 92mm
Package Weight0.1 kg
Table of Product Parameters
Figure 3: Product Parameters
Product dimensions diagram (50mm width, 92mm height)
Figure 4: Product Dimensions

5. Setup and Installation

IMPORTANT: This LoRa version Motion Detector is ONLY compatible with the Staniot Secpanel 7 Pro. It will NOT work with Staniot Secpanel 7, Secpanel 5, Secpanel 3, or other 433MHz alarm hosts.

5.1. Battery Installation

  1. Open the back cover of the motion detector.
  2. Insert two AA batteries, ensuring correct polarity (+/-).
  3. Close the back cover securely.
Internal view of the motion detector showing battery compartment, anti-tamper switch, power ON/OFF, LED light switch, and trigger time settings (5s/5min)
Figure 5: Internal components and settings

5.2. Pairing with Staniot Secpanel 7 Pro

Follow these steps to pair your motion detector with the Staniot Secpanel 7 Pro:

  1. On your Secpanel 7 Pro, navigate to the 'Connection' menu.
  2. Select 'Sensor'.
  3. Choose 'Motion' from the sensor types.
  4. Tap the '+ Pair' button on the screen. The panel will prompt you to 'Please trigger accessories'.
  5. To trigger the motion detector, open its back cover and press the internal tamper switch or the power ON/OFF switch. The panel should confirm 'Pair ok'.
  6. Once paired, you can configure settings such as 'Mode', 'Delay', and 'Name' for the motion sensor on the panel.
Video 1: Demonstration of pairing the motion sensor with the security panel and triggering an alarm.

5.3. Mounting the Detector

The motion detector can be mounted on a wall in areas requiring surveillance. Consider the 110° detection angle for optimal coverage. Avoid placing it directly facing heat sources or in areas with frequent air currents that might cause false alarms.

Floor plan showing optimal placement of multiple motion detectors and a central security panel
Figure 6: Example floor plan for motion detector placement
Motion detector and security panel in a living room setting, demonstrating it working together
Figure 7: Motion detector working with the security panel

6. Operation

6.1. Arming and Disarming

Once paired, the motion detector operates in conjunction with your Staniot Secpanel 7 Pro. Arm the system (e.g., 'Away' or 'Home' mode) via the security panel to activate the motion detector. When motion is detected while the system is armed, an alarm will be triggered. Disarm the system to deactivate the motion detector and prevent false alarms.

6.2. Adjusting Trigger Time

The motion detector has an adjustable trigger time setting (5 seconds or 5 minutes). This setting determines how long the sensor remains in an 'alarm' state after detecting motion before it can detect new motion. This can be configured via the internal switch as shown in Figure 5, or potentially through the Secpanel 7 Pro's advanced settings for the sensor.

6.3. LED Indicator Light

The device features a toggleable LED indicator light. This can be switched ON or OFF using the internal switch (refer to Figure 5). Turning it off can make the detector less conspicuous.

Motion detector sensing a burglar in a living room, connected to a security panel
Figure 8: Real-time home monitoring in action

7. Maintenance

7.1. Battery Replacement

The motion detector uses two AA batteries. When the battery level is low, the security panel may indicate a low battery warning. To replace the batteries:

  1. Open the back cover of the detector.
  2. Remove the old batteries.
  3. Insert new AA batteries, observing correct polarity.
  4. Close the back cover.

7.2. Cleaning

Wipe the exterior of the motion detector with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

8. Troubleshooting

ProblemPossible CauseSolution
Detector not pairingIncorrect model, low battery, pairing mode not activated on panel.Ensure you have Secpanel 7 Pro. Check batteries. Re-enter pairing mode on the panel and trigger the sensor.
False alarmsImproper placement, pets, direct sunlight/heat sources, high air currents.Relocate the detector. Adjust sensitivity if possible (check panel settings). Avoid direct heat/airflow.
No detectionSystem disarmed, low battery, obstructed view, sensor malfunction.Ensure system is armed. Replace batteries. Clear any obstructions. If problem persists, contact support.
Short communication rangeObstacles (thick walls), interference, incorrect placement.Ensure minimal obstructions between detector and panel. Reposition for better signal path.

9. User Tips

  • Understanding 'Trigger' Setting: The 'trigger' setting (5 seconds or 5 minutes) in the motion sensor configuration on the Secpanel 7 Pro refers to the re-detection interval. If set to 5 seconds, the sensor will be ready to detect new motion 5 seconds after the last detection. If set to 5 minutes, it will wait 5 minutes. A shorter interval is more sensitive but can drain batteries faster or cause repeated alarms for continuous presence.
  • Battery Life: While LoRa technology is designed for low power consumption, actual battery life can vary based on detection frequency and environmental factors. Regularly check the battery status via your Secpanel 7 Pro.
  • Animal Detection: This PIR motion detector is designed to detect human-sized heat signatures. Small pets might not trigger it, but larger animals could. Consider placement to avoid pet-induced false alarms.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Staniot website or contact your retailer. Keep your purchase receipt as proof of purchase.

For video guides and additional resources, you may visit the Staniot YouTube channel: https://www.youtube.com/channel/UC0omnisV9_rZOcGsSMH1hLQ

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.