TANALAZ Y1

Contents

TANALAZ Y1 Portable Karaoke Machine User Manual

Model: Y1 | Brand: TANALAZ

Introduction

Welcome to the TANALAZ Y1 Portable Karaoke Machine user manual. This document provides detailed instructions for setting up, operating, and maintaining your new karaoke system. The TANALAZ Y1 is a versatile portable Bluetooth PA speaker system designed for home entertainment, family singing, and as a fun gift for children. It features colorful lighting, intelligent noise reduction, and supports wireless duets with its included microphones.

Safety Information

  • Do not expose the device to water or excessive moisture.
  • Keep the device away from heat sources and direct sunlight.
  • Use only the provided charging cable and adapter to prevent damage.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel.
  • Keep out of reach of small children to prevent accidental ingestion of small parts.
  • Ensure proper ventilation when operating the speaker.

Package Contents

Please check the package for the following items:

  • TANALAZ Y1 Portable Karaoke Speaker
  • Wireless Microphone(s) (Quantity may vary: 1 or 2 depending on model)
  • USB Charging Cable
  • User Manual (this document)
TANALAZ Y1 Karaoke Machine with Speaker and two Microphones

Image: TANALAZ Y1 Karaoke Machine showing the speaker and two wireless microphones, highlighting key features like Bluetooth 5.3, 10m+ wireless range, 1200mAh battery, and 100Hz-20KHz frequency range.

Specifications

FeatureSpecification
ModelY1
CategorySpeakers
UseHome
Bluetooth Version5.3
Max Wireless Range10m-20m
Battery Capacity1200mAh
Frequency Range100Hz-20KHz
Input/OutputUSB
Input Power<25 W
Weight470g
Sabwoofer Cabinet MaterialMetal
Tweeter MaterialMetal
Control FeaturesVolume control, Low-band, phase, Hi-band, Playback, Crossover, EQ, Input selector
Voice ControlNo
WaterproofNo
Support APPNo
Support Apt-xNo
Intelligent Personal AssistantNone
Display ScreenNo
Audio CrossoverFull-Range
Number of Loudspeaker Enclosure2
Power SourceDC
Channels2 (2.0)
BatteryYes
CommunicationInduction
Speaker TypePortable
Cabinet MaterialPlastic
CertificationsCE, FCC
Speaker Dimensions (H x W)8.4cm (3.30in) x 9.4cm (3.70in)
Microphone Dimensions (L x W)13.8cm (5.43in) x 4.1cm (1.61in)
Dimensions of TANALAZ Y1 speaker and microphone

Image: Diagram showing the dimensions of the TANALAZ Y1 speaker and microphone.

Setup

1. Charging the Device

  • Connect the provided USB charging cable to the speaker's USB input port.
  • Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
  • The charging indicator light will illuminate. Once fully charged, the light may change color or turn off.
  • Charge the microphones using their respective charging ports if applicable.

2. Powering On/Off

  • Speaker: Press and hold the power button on the speaker for a few seconds until you hear an audible prompt or see the indicator lights turn on.
  • Microphones: Press and hold the power button on each microphone until the indicator light illuminates.
  • To power off, repeat the process for both the speaker and microphones.

3. Bluetooth Pairing

  • Ensure the speaker is powered on and in Bluetooth pairing mode (usually indicated by a flashing LED).
  • On your mobile device (smartphone, tablet, laptop), go to Bluetooth settings and enable Bluetooth.
  • Search for available devices. You should see "TANALAZ Y1" or a similar name appear in the list.
  • Select "TANALAZ Y1" to pair. Once paired, you will hear a confirmation sound, and the speaker's LED will stop flashing.
  • The microphones should automatically connect to the speaker once both are powered on. If not, refer to the microphone's specific pairing instructions (if any, usually automatic).
Bluetooth 5.3 chip diagram

Image: Diagram illustrating the Bluetooth 5.3 chip, emphasizing stable transmission and anti-interference capabilities.

TANALAZ Y1 compatibility with various devices

Image: Illustration showing the TANALAZ Y1 speaker's compatibility with various devices such as laptops, televisions, smartphones, and tablets.

Operating Instructions

1. Playing Music

  • After successful Bluetooth pairing, open your favorite music app on your connected device.
  • Select and play your desired songs. The audio will stream through the TANALAZ Y1 speaker.
  • Use the volume controls on the speaker or your connected device to adjust the playback volume.

2. Using the Microphones

  • Ensure the microphones are powered on and connected to the speaker.
  • Speak or sing into the microphone. Your voice will be amplified through the speaker.
  • Adjust microphone volume and echo effects using the controls on the microphone or speaker (if available).
Two people singing with TANALAZ Y1 microphones

Image: Two individuals enjoying a wireless duet with the TANALAZ Y1 microphones, demonstrating high volume output and wide coverage.

3. Sound Modes and Effects

The TANALAZ Y1 features an Intelligent DSP chip for bel canto tuning and offers multiple sound modes and effects for an enhanced karaoke experience:

  • Standard Sound Modes: Hi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, Extra Bass Mode, Transparency Mode, Sleeping Mode, Standard Mode, Game Mode, 3EQ Modes.
  • Voice Changing Effects: Original sound, Male to Female, Female to Male, Warcraft Sound, Doll Sound.
  • Refer to the speaker's control panel or microphone buttons for switching between these modes.
Five sound effects options for TANALAZ Y1

Image: Icons representing five sound effects: Female voice, Male voice, Baby sound, and Warcraft Sound, available on the TANALAZ Y1.

Intelligent DSP chip diagram

Image: Diagram of the Intelligent DSP chip, highlighting its role in bel canto sound correction for delicate and textured audio.

4. Dynamic Lighting

The speaker features dynamic aperture and colorful lighting effects that synchronize with the music, creating a vibrant atmosphere. These lights can typically be toggled or changed via a dedicated button on the speaker.

TANALAZ Y1 speaker with dynamic colorful lighting

Image: The TANALAZ Y1 speaker displaying dynamic and colorful lighting effects, enhancing the musical atmosphere.

Maintenance

  • Cleaning: Use a soft, dry cloth to wipe down the speaker and microphones. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.

Troubleshooting

  • No Power: Ensure the device is fully charged. Check the charging cable and adapter for damage.
  • No Sound from Speaker: Verify the speaker is powered on and the volume is turned up. Check Bluetooth connection and ensure your audio source is playing.
  • Microphone Not Working: Ensure the microphone is powered on and within range of the speaker. Check microphone battery level.
  • Bluetooth Disconnection: Move the speaker and connected device closer to each other. Ensure no other devices are interfering with the Bluetooth signal. Try unpairing and re-pairing the device.
  • Poor Sound Quality: Ensure the audio source is of good quality. Adjust EQ settings on the speaker or your device. Check for obstructions between the speaker and your device.

User Tips

  • For the best karaoke experience, ensure your music source is instrumental or karaoke-specific tracks.
  • Experiment with the different sound effects and voice modes to find your favorite for various songs or for fun.
  • Keep the speaker and microphones charged before events to ensure uninterrupted enjoyment.
  • The portable design makes it easy to move between rooms or take to outdoor gatherings (weather permitting, as it's not waterproof).

Warranty and Support

The TANALAZ Y1 Portable Karaoke Machine comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please reach out to the customer service department of your place of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.