1. Introduction
Thank you for choosing the SAMOLLA TY800 Baitcasting Fishing Reel. This high-performance reel is designed for both saltwater and freshwater fishing, offering durability, precision, and a powerful drag system. Please read this manual carefully to ensure proper setup, operation, and maintenance, maximizing your fishing experience and the longevity of your reel.

2. Key Features
- Durable Construction: Features a stainless steel reinforced metal base, enhancing strength and providing corrosion and seawater resistance.
- Precision Gear System: Equipped with Japan Precision Gear Manufacturing, ensuring smooth rotation and improved spool precision.
- High Performance Drag: Offers a maximum drag of 15KG, suitable for handling large fish.
- Advanced Braking System: Incorporates a 10-piece magnetic bean, 12-level magnetic brake system for accurate casting control.
- Smooth Line Management: Funnel-shaped vortex ceramic line guide greatly reduces line friction for super long casts.
- Comfortable Grip: High-strength lightweight grip designed for extended use.
- Aluminum Spool: Die-cast aluminum spool with large line capacity.
- Pressure Release Alarm: Added brake sound device that produces a 'click' sound when a fish pulls the spool, alerting the angler.





3. Specifications
| Parameter | Value |
|---|---|
| Model | TY800 |
| Gear Ratio | 6.3:1 |
| Ball Bearings | 5+1BB |
| Max Drag | 15KG |
| Weight | 236g |
| Line Capacity (mm/m) | 0.23mm/330m, 0.33mm/230m, 0.38mm/160m |
| Material | Metal |
| Fishing Reels Type | Baitcast Reel |
| Fishing Method | Spinning |
| Brake System | 10 Magnetic Beans, 12-level Magnetic Brake System |
| Spool Type | Die-cast Aluminum |
| Line Guide | Funnel-shaped Vortex Ceramic |
| Base Material | Stainless Steel Reinforced Metal |
| Reel Dimensions (approx.) | Width: 10cm (3.93in), Height: 8cm (3.2in), Handle Length: 12cm (4.73in) |
| Spool Dimensions (approx.) | Diameter: 3.7cm (1.45in), Width: 3.8cm (1.5in), Inner Diameter: 1.2cm (0.47in) |
Note: Information is for reference only and may have slight differences due to manual measurement.


4. Setup
- Attach to Rod: Securely mount the baitcasting reel onto your fishing rod's reel seat. Ensure it is tightened firmly to prevent wobbling during casting and retrieval.
- Spooling Line:
- Open the side plate of the reel to access the spool.
- Tie your fishing line to the spool using an appropriate fishing knot (e.g., arbor knot).
- Close the side plate.
- Begin winding the line onto the spool, maintaining light tension to ensure even and tight winding. Do not overfill the spool; leave a small gap from the edge.
- Adjusting Magnetic Brake: The TY800 features a 12-level magnetic brake system. Locate the magnetic brake adjustment knob on the side of the reel. Start with a higher setting (more braking force) to prevent backlashes, especially when learning to cast. As you gain experience, you can reduce the setting for longer casts.
- Adjusting Star Drag: The star-shaped knob near the handle controls the drag system. Turn it clockwise to increase drag tension and counter-clockwise to decrease it. Set the drag to approximately 25-30% of your line's breaking strength. This allows the line to pay out before breaking under heavy load.
- Adjusting Spool Tension (Cast Control Knob): This knob is typically located opposite the handle. It controls the free fall speed of the lure. Adjust it so that when you press the thumb bar and release the spool, the lure falls slowly to the ground without the spool continuing to spin excessively once the lure lands. This helps prevent backlashes.
5. Operating Instructions
- Casting:
- Hold the rod and reel comfortably.
- Press the thumb bar to disengage the spool.
- Use your thumb to lightly feather the spool, preventing it from spinning freely.
- Make a smooth casting motion. As the lure flies, release your thumb from the spool.
- Just before the lure hits the water, lightly feather the spool again with your thumb to stop it from overrunning, preventing a backlash.
- Engage the reel by turning the handle or pressing the thumb bar again (depending on the model).
- Retrieving: Turn the handle to retrieve your line. The 6.3:1 gear ratio provides a good balance of speed and power for various fishing techniques.
- Using the One-Click Slow Down Button: This feature allows for faster and more convenient control of line laying. Press the button during retrieval or when adjusting line tension to slow down the spool, aiding in precise line management.
- Fighting a Fish: When a fish strikes, maintain a steady retrieve and let the drag system do its job. The pressure release alarm will sound with a 'click' when the fish pulls the spool, indicating a strong run. Adjust the drag as needed during the fight, but avoid sudden, drastic changes.



6. Maintenance
Regular maintenance will extend the life and performance of your SAMOLLA TY800 reel.
- After Each Use:
- Rinse the reel with fresh water, especially after saltwater use. Do not submerge the reel.
- Wipe down the exterior with a clean, soft cloth.
- Loosen the drag completely to prevent compression of the drag washers.
- Periodic Cleaning and Lubrication (Every 3-6 months or as needed):
- Carefully disassemble the reel according to a general baitcasting reel disassembly guide (if you are comfortable doing so).
- Clean all internal components, especially gears and bearings, with a reel cleaning solution.
- Apply a thin layer of high-quality reel grease to gears and moving parts.
- Apply a small drop of reel oil to bearings and other friction points.
- Reassemble the reel, ensuring all parts are correctly placed.
- Storage: Store your reel in a dry, cool place away from direct sunlight and extreme temperatures. Use a reel cover to protect it from dust and scratches.
7. Troubleshooting
- Problem: Frequent Backlashes
- Solution: Increase the magnetic brake setting. Ensure the spool tension knob is adjusted correctly (lure should fall slowly). Practice your casting technique, focusing on a smooth motion and thumb control.
- Problem: Stiff or Grinding Handle
- Solution: The reel may need cleaning and lubrication. Disassemble, clean old grease/dirt, and apply fresh reel grease to the gears and handle shaft. Check for any bent or damaged components.
- Problem: Drag Slipping or Inconsistent
- Solution: Check if the drag washers are dry, dirty, or worn. Clean or replace them if necessary. Ensure the drag knob is tightened appropriately for your fishing line and target species. Always loosen the drag after each use to prevent washer compression.
- Problem: Line Not Laying Evenly on Spool
- Solution: Check the line guide for obstructions or damage. Ensure the line is spooled under consistent tension. If the problem persists, the worm gear for the line guide may need cleaning or lubrication.
8. User Tips
No specific user tips are available from reviews or Q&A at this time. However, general tips for baitcasting reels include:
- Start with Heavier Lures: When learning, use heavier lures as they are easier to cast and manage with a baitcaster.
- Practice Casting: Spend time practicing your casting technique in an open area to get a feel for the reel's braking and tension settings.
- Match Line to Lure: Use a fishing line that is appropriate for the weight of your lure and the conditions you are fishing in.
- Regular Inspection: Periodically check your line for nicks or fraying, especially after fighting a fish or casting near abrasive structures.
9. Warranty and Support
For any questions, technical assistance, or warranty claims regarding your SAMOLLA TY800 Baitcasting Fishing Reel, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty purposes.