DayPlus 5000W High Pressure Washer

Contents

DayPlus 5000W High Pressure Washer User Manual

Portable Jet Wash for Car, Patio, Garden & Driveway Cleaning

1. Introduction

Thank you for choosing the DayPlus 5000W High Pressure Washer. This powerful and portable cleaning machine is designed for effective removal of dirt and grime from various surfaces, including cars, patios, gardens, driveways, floors, walls, roofs, and windows. With its robust 5000W motor, 350Bar/5000PSI pressure, and a flow rate of 5L/min (1.32GPM), it offers strong cleaning performance in a compact and lightweight design.

This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your new pressure washer. Please read it thoroughly before first use and keep it for future reference.

DayPlus 5000W High Pressure Washer with accessories and nozzle spray patterns

Figure 1: DayPlus 5000W High Pressure Washer and included accessories.

2. Product Components

Familiarize yourself with the parts of your DayPlus High Pressure Washer:

Labeled diagram of pressure washer components including handle, gun holster, water pipe rack, wire rack, switch, water outlet, water inlet

Figure 2: Main components of the pressure washer.

  • Handle: For carrying the unit.
  • Gun Holster: Storage for the spray gun.
  • Water Pipe Rack: For organizing hoses.
  • Wire Rack: For organizing the power cord.
  • Switch: Power on/off.
  • Water Outlet: Connection point for the high-pressure hose.
  • Water Inlet: Connection point for the water supply hose.

Included Accessories:

  • Multi-functional short gun
  • Extended lance
  • Gun head
  • Foam spray bottle
  • 7M water outlet hose
  • 5.5M Power cord
  • 2M water inlet hose
  • Filter screen
  • Quick connector
  • Plastic Connector
  • Brass Connector
  • Universal connector
  • Dual-purpose Hand-tight Connector
  • Short rotating nozzle
  • Quick connect faucet

3. Specifications

Attribute Value
Product TypeElectric Pressure Washer / High Pressure Cleaner
Brand NameDayPlus
ColorGREEN
Voltage240V
Power5000W
Pressure350Bar / 5000PSI
Flow Rate5L/min (1.32GPM)
Power Cord Length5.5M (approx. 18ft)
Inlet Pipe Length2M (approx. 6.6ft)
Water Outlet Pipe Length7M (approx. 23ft)
Body Size28 x 17 x 15 CM
Body Weight3.5 KG
Packaging Size33.5 x 19.5 x 40 CM
OriginMainland China
Dimensions of the pressure washer unit and spray gun

Figure 3: Product dimensions.

4. Setup and Installation

4.1 Fuselage Installation

  1. Install the rear water inlet pipe bracket and secure it with screws.
  2. Install the right short gun bracket, align it with the groove and insert it downwards.
  3. Install the left power cord bracket, align it with the groove and insert it downwards.

4.2 Water Inlet Pipe Installation

  1. Install the quick connector and filter screen on both ends of the water inlet pipe respectively.
  2. Install the transparent water inlet connector at the water inlet position behind the body, tighten it clockwise, and then connect the water inlet pipe quick connector.
  3. Connect one end of the water inlet pipe to the quick connector, and the other end to the universal hand-tight fitting/dual-use hand-tight fitting.

Connection Methods for Common Faucet Adapters:

Faucet Type Recommended Connector Installation Method
20MM Male Thread (DN20)1. Plastic Connector
2. Universal Hand-tight Connector
1. Unscrew water filter cap from faucet outlet.
2. Install plastic connector.
3. Install universal hand-tight connector.
25MM Male Thread (DN25)1. Brass Connector
2. Universal Hand-tight Connector
1. Unscrew water filter cap from faucet outlet.
2. Install brass connector.
3. Install universal hand-tight connector.
20MM Outlet Without ThreadDual-purpose Hand-tight ConnectorDirectly install dual-purpose tightening connector, tighten clamping ring to prevent leakage. (For faucets with 20MM diameter, inner ring of connector needs to be pulled out).
15MM Outlet Without ThreadDual-purpose Hand-tight ConnectorDirectly install dual-purpose tightening connector, tighten clamping ring to prevent leakage.
24MM Female Thread (M24)1. Brass Connector
2. Universal Hand-tight Connector
1. Unscrew water filter cap from faucet outlet.
2. Install brass connector.
3. Install universal hand-tight connector.
22MM Male Thread (M22)1. Brass Connector
2. Universal Hand-tight Connector
1. Unscrew water filter cap from faucet outlet.
2. Install brass connector.
3. Install universal hand-tight connector.
Diagram illustrating two methods of water intake: faucet water supply and self-suction from a bucket

Figure 4: Two ways to take water: Faucet water supply and self-suction.

4.3 Water Outlet Pipe Installation

Use the explosion-proof water outlet plug (included in accessories) to insert it into the water outlet, and then tighten the nut clockwise.

4.4 High-Pressure Water Gun Installation

Connect the high-pressure water outlet hose to the multi-functional short gun and extended lance as shown in the diagram. Ensure all connections are secure to prevent leaks.

5. Operating Instructions

5.1 Starting the Pressure Washer

  1. Ensure all hoses are securely connected and the water supply is turned on.
  2. Plug the power cord into a grounded electrical outlet.
  3. Turn the main switch to the 'ON' position.
  4. Before starting cleaning, press the trigger on the spray gun to release any trapped air and allow water to flow steadily.

5.2 Adjusting the Nozzle

The one-piece nozzle allows for adjustable spray patterns from 1-180° to suit various cleaning tasks. Rotate the nozzle head to change the spray pattern:

  • High-Pressure Straight Radiation: For stubborn dirt and concentrated cleaning.
  • 0-60° Diffuse Jet: For general cleaning and wider coverage.
  • 60-180° Free Jet: For gentle rinsing or covering large areas.
  • Foam Kettle Spray: Attach the foam spray bottle for applying detergent.
Close-up of the one-piece nozzle demonstrating different spray patterns: straight, diffuse, free jet, foam kettle spray

Figure 5: Nozzle spray patterns.

5.3 Application Scenarios

Your DayPlus pressure washer is versatile for many cleaning applications:

  • Car Washing: Use a diffuse jet or foam spray for gentle yet effective cleaning.
  • Patio & Driveway Cleaning: Use a straight or diffuse jet for removing dirt, moss, and grime.
  • Garden Furniture & Fences: Adjust the spray to a wider angle for delicate surfaces.
  • Walls, Roofs & Windows: Utilize the extended lance for reaching high areas.
Collage showing various application scenarios for the pressure washer including car washing, patio cleaning, fence cleaning, and roof cleaning

Figure 6: Various application scenarios.

5.4 Self-Suction Function

The machine supports self-suction, allowing it to draw water from a static source like a rain barrel or bucket. When using this function, ensure the inlet hose is fully submerged and does not exceed two meters in length. The water supply hose length is not restricted.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your pressure washer.

  • Cleaning: After each use, rinse the machine and accessories with clean water. Do not splash or rinse the machine itself directly with high-pressure water.
  • Storage: Store the hose, cable, and accessories neatly on the device. Keep the pressure washer in a dry, protected area.
  • Water Filter: Regularly check and clean the filter screen on the water inlet pipe to prevent impurities from entering the pump.
  • Winterization: In freezing temperatures, ensure all water is drained from the pump and hoses to prevent damage.

7. Common Problems and Troubleshooting

Problem Cause Solution
Poor self-priming function, machine runs for a long time without water output
  • Air enters the water inlet pipe.
  • Water source is not clean / impurities in the filter.
  • Debris is blocking the check valve in the pump.
  • When self-priming, the water inlet pipe must be submerged in water slowly and not floating to prevent air from entering.
  • Ensure that the water source is clean.
  • Disassemble the pump part to check whether there is debris in the check valve of the water inlet or outlet and clean it up in time.
The machine does not turn off (no automatic stop function, the gun does not stop when turned off)
  • Debris is blocking the nozzle at the spray head.
  • The machine's high-pressure water flow leaks, and the machine cannot maintain pressure, causing repeated on and off.
  • Use a universal nozzle provided with the accessories to clean the nozzle and remove debris.
  • Check whether the quick connector at the machine's water inlet and the water inlet pipe is tightened, whether there is any damage, and whether the machine assembly method is correct.
The motor runs, but the nozzle sprays water irregularly and repeatedly turns on and off
  • Air enters the pump during the water inlet process.
  • The safety valve of the machine is twisted or deformed due to impact.
  • Poor contact at the micro switch.
  • Exhaust the air in the pump.
  • Replace the twisted or deformed safety valve in time.
  • Replace the micro switch component (notify the dealer or manufacturer to solve the problem).
The high-pressure hose vibrates, numbness occurs, and the high-pressure water output is weak when the machine is running / Oil/water leakage
  • The internal sealing ring of the pump is damaged or deformed.
  • The sealing parts are severely worn or the oil cylinder leaks seriously, causing the machine to work without oil.
  • Disassemble the pump component and check whether the sealing parts on the pump body and pump seat are damaged, and whether the oil seal at the connection between the oil cylinder and the pump seat is broken or deformed.

8. Safety Precautions

WARNING: Improper use of high-pressure cleaning machines can be dangerous. Always follow these safety guidelines.

  • Read and understand all product usage rules before operating.
  • Do not place the cleaning machine in low-lying areas with water or allow it to come into contact with water.
  • Do not run the machine without water for an extended period, as it can damage the motor.
  • If there is poor water flow or if the pressure gauge needle enters the red zone, immediately stop using the machine.
  • Ensure a stable and reliably grounded power supply. If the power cord is damaged, it must be replaced by a dedicated professional to avoid danger.
  • Do not splash or rinse the machine itself with water.
  • This machine is not intended for professional or commercial cleaning purposes.
  • Electrical connections should be made by a qualified electrician.
  • Use only cleaning agents provided or recommended by the manufacturer. The use of other cleaning agents or chemicals may have adverse effects on the safety of the appliance.
  • Unless wearing protective clothing, do not use this appliance within the range of activity of personnel.
  • Do not direct the water flow towards people, live electrical equipment, or the appliance itself.
  • Do not direct the water flow towards yourself or others for the purpose of cleaning clothes.
  • Disconnect the power before performing any user maintenance.
  • Children or untrained personnel should not use high-pressure cleaning machines or steam cleaners.
  • To ensure the safety of the appliance, only use original parts provided or approved by the manufacturer.
  • High-pressure hoses and fittings are important for the safety of the appliance. Only use hoses and fittings recommended by the manufacturer.
  • The overflow valve will automatically open and cut off the power supply when the pressure reaches the set value.
  • The motor thermal protection will automatically disconnect if the motor heats up under heavy load or excessive current.

9. User Tips

  • Versatile Water Source: Take advantage of the self-suction feature to draw water from alternative sources like rain barrels, offering flexibility in areas without direct faucet access.
  • Effective for Various Tasks: This pressure washer is highly effective for small to medium-sized cleaning jobs, including car washing, cleaning raw cement terraces, and removing mold and lichen from walls and outdoor floors.
  • Compact Power: Despite its small and lightweight design, users report excellent pressure, making it a powerful tool for its size.
  • Check Plug Type: Verify the power plug type is compatible with your region's electrical outlets before use.
  • Review Specifications: Always double-check the product specifications, especially pressure (350Bar/5000PSI) and power (5000W), to ensure it meets your cleaning needs.

10. Warranty and Support

For any issues not covered in the troubleshooting section, or for warranty claims, please contact the seller or manufacturer directly. Ensure you have your purchase details readily available.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

© 2024 DayPlus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.