1. Introduction
The NEOHIPO BP10 is a versatile mini Bluetooth amplifier designed to deliver high-fidelity audio for passive speakers and bass shakers. Featuring both stereo and mono modes, it offers flexible connectivity options via Bluetooth 5.0 and AUX input. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and an immersive Hi-Fi listening experience.
2. Package Contents
Please check the box for the following items:
- BP10 Power Amplifier x1
- 12V 3A Power Adapter x1
- User Manual x1
3. Product Overview
Familiarize yourself with the amplifier's components and connections.

The front panel features the Mode/Vol Knob, Mode Indicator, and 3.5mm AUX Input. The rear panel includes Left Passive Speaker Output (R+ R-), DC 12V-24 IN power input, and Right Passive Speaker Output (L+ L-).
Controls and Ports:
- Mode/Vol Knob: Rotates to adjust volume. Press to switch between input modes (Bluetooth/AUX).
- Mode Indicator: LED light indicating the currently active input mode.
- AUX (3.5mm Aux Input): For wired audio connection from devices like laptops or CD players.
- DC 12V-24 IN: Power input port for the DC power adapter.
- Left Passive Speaker Output (R+ R-): Connects to the right channel of a passive speaker.
- Right Passive Speaker Output (L+ L-): Connects to the left channel of a passive speaker.
4. Setup Instructions
Follow these steps for initial setup of your NEOHIPO BP10 amplifier.
4.1 Power Connection
- Ensure the amplifier is turned off (if applicable) and unplugged.
- Connect the provided 12V 3A DC power adapter to the 'DC 12V-24 IN' port on the rear of the amplifier.
- Plug the power adapter into a suitable wall outlet. The amplifier will power on.
4.2 Speaker Connection
The BP10 supports both stereo and bridged mono configurations for passive speakers or bass shakers.

Illustrates how to connect passive speakers for stereo output (50W x 2) and how to bridge the output for mono mode (100W x 1), suitable for bass shakers.
Stereo Mode (50W x 2)
For standard stereo sound with two passive speakers:
- Connect the positive (+) terminal of your left passive speaker to the 'L+' terminal on the amplifier.
- Connect the negative (-) terminal of your left passive speaker to the 'L-' terminal on the amplifier.
- Connect the positive (+) terminal of your right passive speaker to the 'R+' terminal on the amplifier.
- Connect the negative (-) terminal of your right passive speaker to the 'R-' terminal on the amplifier.
Bridged Mono Mode (100W x 1)
For a single, more powerful output, typically used for bass shakers:
- Connect the positive (+) terminal of your bass shaker (or single speaker) to the 'L+' terminal on the amplifier.
- Connect the negative (-) terminal of your bass shaker (or single speaker) to the 'R-' terminal on the amplifier.
- Ensure the amplifier is set to mono mode (refer to Operating Instructions).
4.3 Input Connection
Bluetooth Connection
- Ensure the amplifier is powered on.
- Press the Mode/Vol knob to cycle through input modes until the Mode Indicator shows Bluetooth mode (usually a blue light).
- On your source device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "NEOHIPO BP10" from the list. Once connected, the Mode Indicator will typically show a solid blue light.
AUX Input Connection
- Connect a 3.5mm audio cable from your audio source (e.g., laptop, CD player) to the 'AUX' input port on the front of the amplifier.
- Press the Mode/Vol knob to cycle through input modes until the Mode Indicator shows AUX mode (usually a green light).
5. Operating Instructions
5.1 Power On/Off
The BP10 amplifier powers on automatically when connected to a power source. To turn it off, disconnect the power adapter.
5.2 Volume Control
Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume.
5.3 Input Mode Selection
Press the large knob on the front panel to cycle between the available input modes: Bluetooth and AUX. The Mode Indicator light will change color to reflect the active mode (e.g., blue for Bluetooth, green for AUX).
5.4 Stereo and Mono Output Modes
The amplifier automatically detects the speaker configuration. For stereo output, connect two speakers as described in Section 4.2. For a single, more powerful mono output (e.g., for a bass shaker), bridge the speaker connections as described in Section 4.2. The amplifier will adjust its output accordingly.
This video demonstrates the amplifier's use with bass shakers, Bluetooth connectivity, AUX input, and stereo/mono configurations.
6. Specifications
Technical specifications for the NEOHIPO BP10 Mini Bluetooth Amplifier:

A visual representation of the amplifier's technical data.
| Feature | Specification |
|---|---|
| Amplifier Type | 2.0 Channel Stereo Amplifier |
| Amplifier Chips | TI TPA3116 |
| Terminal Impedance | 2-8Ω |
| Bluetooth Version | V5.0 |
| Bluetooth Connection Distance | 20m (65ft) |
| Bluetooth Transmission Format | SBC/AAC |
| Maximum Power Output | Stereo 50W x 2, Mono 100W x 1 |
| Input Mode | Bluetooth, AUX (3.5mm) |
| Output | Passive speaker output (banana head or bare wire) |
| THD (Total Harmonic Distortion) | ≤ 0.04% |
| SNR (Signal-to-Noise Ratio) | ≥ 100dB |
| Voltage Range | DC 12V-24V |
| Weight | 200g |
| Dimensions (W x D x H) | 107mm x 142mm x 41mm |
7. Troubleshooting
If you encounter issues with your NEOHIPO BP10 amplifier, please refer to the following common problems and solutions:
7.1 No Sound Output
- Check Power: Ensure the power adapter is securely connected to both the amplifier and a working power outlet.
- Verify Input Source: Press the Mode/Vol knob to confirm the correct input mode (Bluetooth or AUX) is selected, indicated by the Mode Indicator light.
- Speaker Connections: Double-check that your passive speakers are correctly wired to the amplifier's output terminals (positive to positive, negative to negative).
- Volume Level: Rotate the Mode/Vol knob clockwise to increase the volume. Ensure the volume on your source device is also turned up and not muted.
- Source Device: Test with a different audio source device or cable to rule out issues with the original source.
7.2 Crackling or Distortion in Mono Mode
- Speaker Impedance: Ensure the impedance of your bass shaker or speaker is compatible with the amplifier's output in mono mode (2-8Ω). Incompatible impedance can cause distortion.
- Cables: Try using different speaker cables to rule out faulty wiring.
- Input Signal: Ensure the audio input signal is not overdriven, which can cause distortion at higher volumes.
- Power Supply: While the included adapter is 12V 3A, for demanding loads in mono mode, ensure your power supply is sufficient and stable within the 12V-24V range.
7.3 Bluetooth Connection Issues (e.g., with Windows 11 Notebook)
- Audio Output Settings: On your Windows 11 notebook, go to Sound Settings and ensure that "NEOHIPO BP10" is selected as the primary audio output device.
- Bluetooth Drivers: Update your notebook's Bluetooth drivers to the latest version.
- Interference: Move the amplifier and notebook closer together and away from other wireless devices that might cause interference.
- Re-pair Device: Remove "NEOHIPO BP10" from your notebook's Bluetooth device list and attempt to re-pair.
- Test with Other Devices: Confirm the amplifier's Bluetooth functionality by pairing it with a different device (e.g., a smartphone). If it works with other devices, the issue is likely with the notebook's configuration.
7.4 Power Adapter Discrepancy (3A vs. 5A)
The NEOHIPO BP10 amplifier is designed to operate within a DC 12V-24V range. The standard package includes a 12V 3A power adapter, which is sufficient for typical use. While the amplifier can technically handle up to 5A or more (depending on voltage and load), the included 3A adapter meets the specified requirements. If you require higher power output for specific applications, you may consider a compatible 12V-24V power supply with a higher amperage (e.g., 5A) that matches the amplifier's input requirements, ensuring it has the correct barrel connector size and polarity.
8. User Tips
- The NEOHIPO BP10 is an affordable and practical option for achieving decent sound quality in smaller spaces like a studio or loft.
- It pairs well with 60-watt center channel speakers, offering straightforward setup and use.
- When connecting via Bluetooth to a computer, always verify your operating system's audio output settings to ensure the amplifier is selected as the active playback device.
9. Maintenance
To ensure the longevity and optimal performance of your NEOHIPO BP10 amplifier, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the exterior of the amplifier. Avoid using liquid cleaners, aerosols, or solvents, as they may damage the finish or internal components.
- Environment: Keep the amplifier in a clean, dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Ventilation: Ensure that the ventilation openings are not blocked to prevent overheating. Do not place the amplifier on soft surfaces that may obstruct airflow.
- Storage: If the amplifier will not be used for an extended period, disconnect it from the power outlet.
- Handling: Handle the device with care to avoid physical damage.
10. Warranty & Support
The NEOHIPO BP10 Mini Bluetooth Amplifier comes with a 1-year trade-in warranty, ensuring peace of mind for your purchase. For any product-related inquiries, technical assistance, or warranty claims, please contact our dedicated customer support team.
For more detailed information and comprehensive diagrams, you can refer to the complete user manual available as a PDF document: NEOHIPO BP10 User Manual (PDF)