1. Product Overview
The DIXSG 955465 is a high-quality 3.7V 5000mAh rechargeable Lithium Polymer (Li-Po) battery designed for various electronic devices. It features a built-in intelligent protection circuit (PCB) to ensure safe and reliable operation.
2. Specifications
| Attribute | Value |
|---|---|
| Model | 955465 |
| Type | Li-Polymer (Lithium Battery) |
| Nominal Capacity | 5000mAh (Real 5000mAh) |
| Rated Voltage | 3.7V |
| Charging Voltage | 4.2V |
| Size (H*W*L) | 9.5mm * 54mm * 65mm |
| Rechargeable | Yes |
| Charging Temperature | 0°C to 45°C |
| Discharge Temperature | -20°C to +60°C |
| Storage Temperature | -20°C to +45°C |
| Charging Current | Standard: 0.5C, Fast: 1.0C |
| Standard Charging Method | 0.5C CC charging to 4.25V, then CV (4.2V) until charging current ≤0.05C |
| Maximum Charging Current | 1C |
| Maximum Discharge Current | 1C |
| Certifications | CE, UL, KC |
3. Safety Features
The DIXSG 955465 battery is equipped with an intelligent Protection Circuit Board (PCB) to ensure safe operation and extend battery life. This PCB provides protection against:
- Overcharge protection
- Overdischarge protection
- Short circuit protection
- Overvoltage protection
- Overcurrent protection
4. Setup and Installation
- Compatibility Check: Before installation, verify that your device has sufficient space for a battery of size 9.5mm * 54mm * 65mm. It is recommended to purchase a battery with dimensions slightly smaller than the available space to ensure a proper fit.
- Wiring: Connect the battery's red wire to the positive (+) terminal and the black wire to the negative (-) terminal of your device. Ensure correct polarity.
- Prevent Short Circuits: After the battery is charged or connected, ensure that the red and black wires do not come into contact with each other to prevent short circuits.
- Secure Placement: Once connected, securely place the battery within your device, ensuring it does not move freely.
5. Operation
This rechargeable Li-Po battery is suitable for a wide range of portable electronic devices. Common applications include:
- Walkie-talkies
- PSP (PlayStation Portable)
- Electric toys
- MP5 players
- GPS devices
- Remote controls
- iPod devices
- Tablets
- Bluetooth speakers and headsets
- Cameras
- MID (Mobile Internet Devices)
- POS machines
- Solar lamps
- Home security systems
- WiFi transmitters
- Smart watches
- Car recorders
- Bluetooth ear plugs
Charging the Battery
Use a compatible charger that provides a charging voltage of 4.2V. The standard charging method involves a constant current (CC) of 0.5C until the battery reaches 4.25V, followed by a constant voltage (CV) of 4.2V until the charging current drops to ≤0.05C. Fast charging can be performed at 1.0C.
6. Maintenance and Storage
- Proper Storage: When the battery is not in use for extended periods, it should be removed from the device and stored in a cool, dry place.
- Temperature Range: Store the battery within a temperature range of -20°C to +45°C. Avoid extreme temperatures.
- Avoid Physical Damage: Do not puncture, drop, or expose the battery to excessive force.
- Keep Dry: Protect the battery from moisture and liquids.
7. Troubleshooting
The built-in intelligent PCB is designed to prevent common battery issues. If you experience problems, consider the following:
- No Power/Device Not Turning On:
- Check if the battery is properly installed with correct polarity.
- Ensure the battery is sufficiently charged.
- Verify that the device itself is functioning correctly.
- Battery Not Charging:
- Confirm the charger is compatible and working.
- Check for any visible damage to the battery or charging port.
- Ensure charging temperature is within 0°C to 45°C.
- Short Circuit Warning:
- Immediately disconnect the battery from the device.
- Inspect the wiring for any exposed or touching red and black wires.
- The internal PCB should prevent damage from short circuits, but external shorts should be avoided.
If issues persist, contact the seller for further assistance.
8. User Tips
- Measure Carefully: Always measure the available battery compartment in your device before purchasing to ensure the 9.5x54x65mm dimensions are suitable, allowing for slight manufacturing deviations (1-2mm).
- Initial Charge: For optimal performance, fully charge the battery before its first use.
- Regular Use: Li-Po batteries benefit from regular use. Avoid leaving them fully discharged or fully charged for very long periods if possible.
- Safe Handling: Always handle the battery by its body, avoiding pulling on the wires directly.
9. Warranty and Support
This product is certified with CE, UL, and KC standards, indicating compliance with relevant safety and quality requirements.
For specific warranty details, technical support, or any inquiries regarding your purchase, please refer to the information provided by the seller or contact their customer service directly.
