MESTEK EMF02R

Contents

EMF02R Color Screen EMF Meter User Manual

Model: EMF02R | Brand: MESTEK

1. Introduction

This MESTEK EMF02R is a digital high-frequency electromagnetic radiation meter equipped with a precision high-frequency electromagnetic sensor. It is designed to accurately detect electromagnetic radiation, electric field radiation from various electrical equipment, and high-frequency radiation from base stations.

The instrument offers convenient and simple operation, featuring a dual display and a buzzer alarm. It can measure electromagnetic radiation, electric field radiation, and high-frequency radiation, making it suitable for a wide range of applications in homes, offices, living areas, industrial environments, high-speed rail systems, and high-frequency signal base stations.

1.1. Safety Information

WARNING:

  • Before operating or maintaining this instrument, please read this manual carefully and use the instrument according to the instructions.
  • After storage and shipment in harsh environments, check and confirm whether the instrument is damaged.
  • The instrument must be operated within the specified environmental temperature and humidity range.
  • If any abnormality or failure occurs during use, stop using the instrument immediately.
  • Do not store or use the instrument in direct sunlight, high temperature, or humid environments.
  • Non-professional maintenance personnel are forbidden to open, adjust, or repair this instrument.
  • If there is dust on the instrument, wipe it with a clean, moist, dust-free cloth. Do not use solvents or abrasives for cleaning.
  • During measurement, keep the instrument away from bare conductors or high-voltage devices to prevent electric shock injury.

2. Device Components and Key Functions

Familiarize yourself with the physical components and controls of your EMF02R meter.

Labeled diagram of the MESTEK EMF02R EMF Meter showing its parts and dimensions.
Figure 1: EMF02R Meter Components (Induction probe, Display screen, Function keys, Charging indicator light, Type-C charging port)

2.1. Key Introduction

Close-up of the EMF02R meter's buttons and a table describing their functions.
Figure 2: Key Functions
SymbolDescription
⑂Power button
SELFunction conversion key (E-field, H-field)
AVG/MAXAverage and maximum value conversion keys
HOLDData lock key
🔔Ringtone on/off key
RFHigh frequency signal conversion key

2.2. Display Screen

The EMF02R features a VA reverse display color screen, providing a high-definition digital and analog dual display for clear readings.

Detailed view of the EMF02R meter's color screen display with various indicators and units.
Figure 3: Display Screen Overview
SymbolDescriptionUnitDescription
🔋Battery indicationuTMicro Teslas
⑂Automatic shut-downmGMilliGauss
▁▂▃▄▅▆▇█Simulated displayV/mVolts per meter
AVGAverage valueuW/cm²Microwatt/square centimeter
MAXMaximum value hold℃Celsius
HOLDData hold℉Fahrenheit degree
RFRadio frequency%Percentage
H-fieldMagnetic field🔔Ringtones
E-fieldElectric field

3. Setup and Charging

The EMF02R meter comes with a built-in 18650/2000mAh/3.7V lithium battery. It is ready for use after charging.

3.1. Charging Instructions

EMF02R meter connected to a wall charger via USB Type-C cable, showing 'Charging' and 'Full' indicators.
Figure 4: Charging the EMF02R Meter
  • Use an adapter that meets relevant safety certification requirements (5V/1A) to charge the unit. Ensure charging is done in a well-ventilated and heat-dissipating environment, adhering to electrical safety regulations.
  • When the battery indicator on the screen shows low battery (🔋 icon), charge the unit as soon as possible. A full charge takes approximately 4 hours.
  • During charging, the charging indicator light will be red. It turns green when charging is complete, indicating a full battery. Unplug the charging cable promptly after charging is complete to avoid overcharging.
  • The instrument will automatically turn off during the charging process and cannot be started. It can be used normally once charging is completed or if charging is stopped.

4. Operating Instructions

4.1. Power On/Off

  • Power On/Off: Long press the ⑂ key to turn the unit on or off.

4.2. Measurement Modes

The EMF02R supports three primary measurement modes: High Frequency (RF), Electric Field (E-field), and Magnetic Field (H-field).

Examples of measurement modes: RF for base stations, E-field for kitchen appliances, H-field for high-speed rail.
Figure 5: Measurement Mode Examples
  • High-Frequency Signal Radiation (RF) Measurement:

    Short press the RF key. The screen will display "RF" to enter the high-frequency signal radiation measurement mode. This mode can measure high-frequency signal radiation from base stations within the 30 MHz to 8 GHz range.

  • Electric Field (E-field) Radiation Measurement:

    Short press the SEL key until "E-field" is displayed on the screen. This enters the electric field radiation measurement mode, allowing you to measure the electric field radiation value of electrical equipment.

  • Magnetic Field (H-field) Radiation Measurement:

    Short press the SEL key until "H-field" is displayed on the screen. This enters the electromagnetic field radiation measurement mode. Press the SEL key again to convert the electromagnetic field radiation measurement unit (mG ↔ uT) to measure the electromagnetic radiation values of electrical equipment.

4.3. Data Functions

  • HOLD Data Hold: Short press the HOLD key to lock or unlock the displayed data.
  • AVG/MAX Value: Short press the AVG/MAX key to cycle through MAX (maximum value), AVG (average value), and Cancel (return to real-time reading).

4.4. Alarm and Temperature Unit

  • Ringtone On/Off: Short press the 🔔 key to turn the ringtone on or off.
  • Temperature Unit Selection: Long press the 🔔 key to select between Celsius (℃) and Fahrenheit (℉).

4.5. Interpreting Readings and Alarms

Hold the instrument in hand and slowly move the probe closer to the radiation source. When the radiation value is displayed on the screen and the analog display bar reaches the yellow area, the instrument will emit an audible alarm, indicating that the radiation exceeds safe levels. In such cases, take protective measures or move away from the radiation source.

Table showing radiation levels categorized by color (Green, Yellow, Red) for different units.
Figure 6: Radiation Area Comparison Table
Analog DisplayGreen (Low)Yellow (Moderate)Red (High)
uW/cm²0.0-39.940-99.9100-9999
V/m0-3940-399400-999
mG0.0-3.94.0-39.940.0-199.9
uT0.00-0.390.40-3.994.00-19.99

5. Maintenance

  • Keep the instrument clean. If dust accumulates, wipe it with a clean, moist, dust-free cloth. Avoid using solvents or abrasive cleaners.
  • Store the device in a cool, dry place, away from direct sunlight, high temperatures, and high humidity.
  • Ensure the battery is charged regularly, especially if storing for extended periods, to maintain battery health.
  • Do not attempt to open or repair the instrument yourself. Refer to authorized service personnel for any repairs.

6. Troubleshooting

  • Device not turning on:

    Ensure the battery is sufficiently charged. Connect the device to a power source using the USB Type-C cable and allow it to charge for at least 30 minutes before attempting to power on again. If the device was charging, it will automatically shut down and cannot be started until charging is complete or stopped.

  • Inaccurate or erratic readings:

    Ensure you are holding the device correctly and not obstructing the induction probe. Move away from other strong electromagnetic sources that might interfere with the measurement. Check if the device is in the correct measurement mode (RF, E-field, H-field) for the type of radiation you intend to measure.

  • Buzzer not sounding:

    Check if the ringtone is enabled by short pressing the 🔔 key. If the analog display bar does not reach the yellow or red area, the radiation level might be below the alarm threshold.

  • Automatic shutdown function disabled unexpectedly:

    If the automatic shutdown symbol (⑂ icon) is missing from the upper left corner of the display, the function has been canceled. To restore it, restart the unit after manually shutting it down.

7. Technical Specifications

Table listing the technical parameters of the EMF02R EMF Meter.
Figure 7: Technical Parameters
ParameterValue
Working height2000m
Measurement methodElectromagnetic induction, RF receiving sensor
Display screenVA reverse display color screen
Maximum display9999
Sampling rateAbout 0.4 seconds
Measuring rangeV/m: 0~999 / uT: 0.00~19.99 / mG: 0.0~199.9 / uW/cm²: 0.0~9999
Test bandwidth30MHz~8GHz
Resolution ratioV/m: 1 / uT: 0.01 / mG: 0.1 / uW/cm²: 0.1 / ℃: 0.1 / ℉: 0.2 / %RH: 1%
Alarm modeSound, analog bar
Automatic shut-downAbout 15 minutes
Operation currentApproximately 50mA
Charging interfaceUSB Type-C
USB charging5V/1A
Power supply18650/2000mA/3.7V lithium battery
Charging timeAbout 4 hours
Temperature measurement range0~50℃
Humidity measurement range0~90%RH
Working temperature and humidity0~50℃ / 0~90%RH
Storage temperature and humidity-10~60℃ / 0~80%RH
Size204 × 63 × 32mm
WeightApproximately 220g

8. User Tips

Based on user experiences, here are some helpful tips for using your EMF02R meter:

  • The meter is highly sensitive and effective for detecting radiation from various sources, including Wi-Fi routers, microwave ovens, televisions, and other electronic devices.
  • Pay attention to the analog display bar; when it enters the yellow or red zone, it indicates higher radiation levels, prompting you to take protective measures.
  • The device's USB Type-C charging makes it convenient to power up. Remember it will not operate while charging.
  • Its robust construction and clear color screen enhance the user experience, making it easy to read and interpret measurements.
  • For specific frequency measurements, such as 433MHz transmitters or 2.4GHz Wi-Fi, the meter provides accurate readings.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact their customer service directly. Keep your purchase receipt as proof of purchase.

A user manual in PDF format is available for download: EMF02R User Manual (PDF).

10. Package Contents

The following items are included in your product package:

Image showing the EMF02R detector, cloth bag, USB Type-C charging cable, product manual, and packaging box.
Figure 8: Included Accessories
  • 1 x High-frequency radiation detector (EMF02R)
  • 1 x USB Type-C charging cable
  • 1 x Product manual
  • 1 x Storage bag

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.