VAKIND A1

Contents

VAKIND A1 DAB/FM Radio Alarm Clock User Manual

Model: A1

1. Introduction

The VAKIND A1 is a versatile digital desktop alarm clock featuring DAB and FM radio reception, a large LED display, and dual USB charging ports. This manual provides detailed instructions for setting up and operating your device.

VAKIND A1 DAB/FM Radio Alarm Clock front view

Figure 1: Front view of the A1 DAB/FM Radio Alarm Clock

2. Package Contents

  • 1 x A1 DAB/FM Radio Alarm Clock
  • 1 x Data Cable (for power)
  • 1 x User Manual

3. Product Overview

3.1 Controls and Display

Close-up of A1 alarm clock controls

Figure 2: Top panel controls and LED display

  • LED Display: Shows time, radio frequency, and alarm indicators.
  • SNOOZE/DIMMER Button: Activates snooze during an alarm; adjusts display brightness.
  • SLEEP Button: Sets the sleep timer.
  • Power Button: Turns the device on/off.
  • Alarm 1/2 Buttons: Set and activate Alarm 1 and Alarm 2.
  • DR/Bz/FM Button: Selects alarm sound source (DAB Radio, Buzzer, FM Radio).
  • M (Mode) Button: Switches between DAB and FM radio modes.
  • Up/Down Arrows: Adjust frequency, time, or menu options.
  • Rotary Knob: Adjusts volume, tunes radio, or navigates menus.
  • Preset Buttons (1-5): Store and recall favorite radio stations.

3.2 Rear Panel Connections

Rear view of A1 alarm clock showing ports and telescopic antenna

Figure 3: Rear panel with power input, USB charging ports, and telescopic antenna

  • Loudspeaker: Audio output.
  • Backup Battery Compartment: Holds 3 x AA batteries (not included) for power outage backup.
  • DC 5V Input: Power input for the device (barrel jack).
  • Dual USB Output Ports (5V out1, 5V out2): For charging external devices.
  • Antenna: Extendable whip antenna for radio reception.

4. Setup

  1. Power Connection: Connect the provided data cable to the DC 5V input port on the rear of the alarm clock. Plug the other end into a compatible DC 5V 2A power adapter (not included). The power input uses a barrel jack connector.
  2. Backup Batteries (Optional but Recommended): Open the backup battery compartment on the rear and insert 3 x AA batteries (not included). These batteries will preserve your time and alarm settings during a power outage.
  3. Antenna: Extend the whip antenna fully for optimal DAB and FM radio reception. Position the antenna for the best signal quality.
  4. Initial Power On: Press the Power button to turn on the device. The LED display will light up.
  5. Clock Setting:
    • Automatic Synchronization: If a DAB signal is available, the clock may automatically synchronize its time.
    • Manual Setting: If automatic synchronization does not occur or you prefer manual setting, refer to the "Setting Time" section in Operating Instructions.

5. Operating Instructions

5.1 Basic Operation

  • Power On/Off: Press the Power button.
  • Adjust Display Brightness: Press the DIMMER button repeatedly to cycle through brightness levels.
  • Volume Control: Rotate the Rotary Knob to adjust the volume.

5.2 Radio Operation (DAB/FM)

  1. Select Radio Mode: Press the M (Mode) button to switch between DAB and FM radio modes.
  2. Tune Stations:
    • In DAB mode, the radio will scan for available stations. Use the Up/Down Arrows or Rotary Knob to navigate through the station list.
    • In FM mode, use the Up/Down Arrows or Rotary Knob to manually tune to a frequency.
  3. Store Preset Stations:
    • Tune to your desired station.
    • Press and hold one of the Preset Buttons (1-5) until the display confirms the station is saved.
  4. Recall Preset Stations:
    • Briefly press the desired Preset Button (1-5) to quickly switch to a saved station.
A1 alarm clock radio displaying DAB frequency

Figure 4: Display showing DAB radio frequency

5.3 Alarm Clock Settings

The A1 supports two independent alarms (Alarm 1 and Alarm 2).

  1. Set Alarm Time:
    • Press and hold the desired Alarm 1 or Alarm 2 button. The hour display will flash.
    • Use the Up/Down Arrows or Rotary Knob to set the hour, then press the Alarm button again to confirm.
    • Repeat for minutes.
  2. Set Alarm Schedule:
    • After setting the time, press the Alarm button again to cycle through schedule options: Once, Working Day (Mon-Fri), or All Day (Mon-Sun). Select your preference.
  3. Set Alarm Sound:
    • After setting the schedule, press the Alarm button again to select the wake-up sound: Buzzer, FM Radio, or DAB Radio. If choosing radio, the alarm will play the last tuned station.
  4. Activate/Deactivate Alarm:
    • Briefly press the Alarm 1 or Alarm 2 button to toggle the alarm on or off. An alarm icon will appear on the display when active.
  5. Snooze Function:
    • When an alarm sounds, press the SNOOZE button to temporarily silence it for 9 minutes.

5.4 Sleep Timer

The sleep timer allows you to fall asleep to the radio, which will automatically turn off after a set duration.

  1. Press the SLEEP button repeatedly to cycle through sleep timer durations (10-90 minutes).
  2. The radio will play for the selected duration and then automatically turn off.

5.5 USB Charging

The A1 features dual USB output ports (5V out1, 5V out2) on the rear panel, allowing you to charge two smartphones, tablets, or other smart devices simultaneously.

  • Connect your device's charging cable to one of the USB output ports.
  • Ensure the alarm clock is powered on for charging functionality.

6. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: If the clock loses time or settings during a power outage, replace the 3 x AA backup batteries in the compartment on the rear panel. Ensure correct polarity.
  • Antenna Care: Handle the whip antenna gently to prevent damage.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not power on.No power supply or faulty connection.Ensure the DC 5V power cable is securely connected to both the device and a working power adapter. Verify the power adapter is plugged into a live outlet.
Poor radio reception.Antenna not extended or poor signal area.Fully extend the whip antenna. Try repositioning the device or antenna for better signal. Obstructions like concrete walls can affect reception.
Alarms do not sound.Alarm not activated or volume too low.Ensure the alarm is activated (icon visible on display). Check the volume level. Verify alarm time and schedule settings.
Clock loses time/settings after power off.No backup batteries or depleted batteries.Install 3 x AA backup batteries or replace existing ones.
USB charging not working.Device not powered on or cable issue.Ensure the alarm clock is powered on. Check the USB cable and the device being charged.

8. Specifications

FeatureSpecification
ModelA1
DAB Frequency Band170-240MHz
FM Frequency Band87.5-108MHz
Display3.5 inch LED white light display (5" high viewing angle screen, 1" digital display)
Screen Speaker8 ohm 2W
Clock Backup Battery3 x AA batteries (not included)
Power SupplyDC 5V 2A (power adapter not included)
USB Power Output2 sets of USB ports for charging external devices
Power Consumption1W
AntennaWhip antenna (telescopic)
Dimensions (L x W x H)135 x 65 x 55 mm (5.31 x 2.56 x 2.17 inches)
Weight200g
Dimensions diagram of A1 alarm clock

Figure 5: Product dimensions

9. User Tips

  • Visibility: The large LED display is designed for easy readability, making it particularly suitable for users with limited vision or for checking the time from across a room.
  • Power Adapter: Remember that the DC 5V 2A power adapter is not included. You will need a standard USB wall adapter with a barrel jack output to power the clock.
  • Charging Convenience: Utilize the dual USB ports on the back to conveniently charge your mobile devices overnight, reducing clutter on your nightstand.
  • Radio Reception: For the best DAB and FM radio reception, ensure the telescopic antenna is fully extended and try different orientations if you experience poor signal quality.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.