1. Introduction
Thank you for choosing the TNICER G1EX Motorcycle Intercom Bluetooth Headset. This device is designed to enhance your riding experience by providing seamless communication, entertainment, and navigation capabilities. With advanced Bluetooth 5.2 technology, CVC and DSP noise reduction, and IP65 waterproofing, the G1EX ensures clear audio and reliable performance in various conditions. This manual will guide you through the setup, operation, and maintenance of your G1EX intercom.

2. Package Contents
Please check the box for the following items:

- G1EX Unit
- Speaker & Hard Tube Microphone
- Button Microphone
- Mounting Bracket
- Rubber Pad
- 3M Double-Sided Pad
- Velcro for Speakers (2 pieces)
- Spacer for speaker thickening (2 pieces)
- Velcro for Microphone
- Metal Clip
- USB Charging Cable
- User Manual
3. Product Overview
The G1EX unit features an intuitive design for easy operation while riding. The main unit houses the control buttons, charging port, and speaker/microphone jacks. The large rotary knob and distinct buttons allow for tactile control even with gloves.
Key Features:
- Bluetooth 5.2: Ensures stable and efficient connections.
- 6-Rider Intercom: Supports group communication up to 1000 meters.
- Noise Reduction: CVC and DSP technologies, along with a windproof microphone, provide clear audio.
- IP65 Waterproof: Designed to withstand various weather conditions.
- Long Battery Life: 1000mAh battery for extended use.
- FM Radio: Built-in FM tuner for entertainment.
- Voice Assistant: Compatible with Siri and OK Google.
- Music Sharing: Share music with another connected G1EX unit.


4. Setup and Installation
4.1 Charging the Device
Before first use, fully charge the G1EX unit. Connect the provided USB charging cable to the charging port on the intercom unit and a USB power source (e.g., computer, wall adapter). The charging indicator will show the charging status and turn off when fully charged. A full charge takes approximately 2 hours.

4.2 Mounting the Intercom Unit
The G1EX can be mounted to your helmet using either the mounting bracket with a metal clip or the 3M double-sided adhesive pad.
- Choose Location: Select a flat surface on the left side of your helmet, near the bottom edge, where the unit will not obstruct your vision or movement.
- Using Metal Clip:
- Slide the metal clip of the mounting bracket between the helmet shell and the inner padding.
- Ensure the bracket is securely fastened and does not move.
- Attach the G1EX unit to the bracket.
- Using 3M Double-Sided Pad:
- Clean the chosen area on your helmet thoroughly with alcohol and let it dry completely.
- Peel off one side of the protective film from the 3M pad and firmly attach it to the back of the mounting bracket.
- Peel off the other side of the protective film and firmly press the bracket onto the helmet surface for at least 30 seconds.
- Allow 24 hours for the adhesive to cure before attaching the G1EX unit.
4.3 Installing Speakers and Microphone
- Speaker Placement: Position the speakers inside the helmet's ear pockets. Use the provided Velcro pads to secure them. If needed, use the spacer pads for better fit and audio quality.
- Microphone Placement:
- For full-face helmets, use the hard tube microphone. Position it in front of your mouth, ensuring it is close but not touching.
- For open-face or modular helmets, use the button microphone. Attach it to the inside of the helmet near your mouth using the Velcro.
- Connect Cables: Plug the speaker and microphone cables into the corresponding ports on the G1EX unit. Ensure connections are secure.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds until the indicator light turns on.
- Power Off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.
5.2 Bluetooth Pairing (Smartphone)
- With the G1EX off, press and hold the Power button for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your smartphone, enable Bluetooth and search for new devices.
- Select "TNICER G1EX" from the list of available devices.
- Once connected, the indicator light will flash blue slowly.
5.3 Intercom Function (Group Pairing)
The G1EX supports one-touch connection for up to 6 riders with a maximum communication distance of 1000 meters. The system automatically reconnects if connection is lost due to distance.


- Pairing Two G1EX Units:
- Ensure both units are off.
- On both units, press and hold the Intercom button (usually a dedicated button or a combination with Power) until they enter pairing mode (indicator flashes red and blue).
- Briefly press the Intercom button on one of the units. It will search for and connect to the other unit.
- Once connected, the indicator lights will flash blue slowly.
- Pairing Multiple G1EX Units (3-6 Riders):
- Pair the first two units as described above.
- To add a third unit, put the third unit into pairing mode.
- On one of the already paired units, initiate pairing again (refer to specific button combination in your quick start guide if available, typically a short press of the Intercom button).
- Repeat this process for additional units, pairing them sequentially.
- Universal Connection: The G1EX can connect to most Bluetooth motorcycle intercoms on the market. Follow the pairing instructions for both devices to establish a connection.
5.4 Music Playback and Sharing
- Play/Pause: Short press the Play/Pause button (often the Power button or a dedicated button).
- Next/Previous Track: Rotate the multi-function knob or use dedicated buttons (if present).
- Music Sharing: While playing music, short press the Music Sharing button (if available) or a specific button combination to share audio with a paired intercom unit.
5.5 FM Radio
- Turn On/Off FM: Short press the FM button (if available) or a specific button combination.
- Scan Channels: Short press the Volume Up/Down buttons or rotate the multi-function knob to scan for stations.
5.6 Voice Assistant
Once paired with your smartphone, you can activate your phone's voice assistant (Siri, OK Google) by pressing the dedicated Voice Assistant button or a specific button combination on the G1EX unit.
5.7 Volume Control
Adjust the volume by rotating the multi-function knob or using the Volume Up/Down buttons on the unit.
6. Specifications
The following table outlines the technical specifications of the TNICER G1EX Intercom:
| Feature | Specification |
|---|---|
| Model | G1EX |
| Item Type | Helmet Bluetooth Headset |
| Brand Name | TNICER |
| Connection Mode | Bluetooth 5.2 |
| Maximum Intercom Distance | 500-1000m |
| Maximum Number of Riders | 6 |
| Special Features | FM Radio, Voice Control, Universal Pairing, Waterproof, Noise Reduction |
| Noise Reduction Technologies | Windproof Microphone, DSP Noise Reduction, CVC Noise Reduction |
| Waterproof Rating | IP65 |
| Applicable Helmet Type | Universal |
| Power Supply Mode | Built-in Battery |
| Battery Capacity | 1000mAh |
| Talking Time | Up to 18 Hours |
| Music Time | Up to 20 Hours |
| Charging Time | Approximately 2 Hours |
| Standby Time | Up to 260 Hours |
| Speaker Size | 40mm |
| Certifications | CE, RoHS, KC, FCC |
| Battery Included | Yes |
| High-concerned Chemical | None |
| Origin | Mainland China |

7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery | Charge the device fully (approx. 2 hours). |
| Cannot pair with smartphone/intercom | Not in pairing mode; device too far; interference | Ensure device is in pairing mode (flashing red/blue). Bring devices closer. Turn off other Bluetooth devices. |
| No sound from speakers | Volume too low; speakers disconnected; faulty connection | Increase volume. Check speaker cable connection. Test with another audio source. |
| Microphone not working | Microphone disconnected; incorrect mic type for helmet | Check microphone cable connection. Ensure correct microphone (hard tube/button) is used and positioned correctly. |
| Intercom range is short or connection drops | Obstructions; environmental interference; exceeding max range | Ensure line of sight between units. Avoid dense urban areas or large obstacles. Stay within 1000m range. |
8. User Tips
- Quantity Clarification: Please note that the TNICER G1EX is sold as a single unit. The feature '6 Riders Intercom' refers to the device's capability to connect and communicate with up to six other G1EX units, not that six units are included in one purchase.
- Microphone Placement: For optimal noise reduction and clear communication, ensure your microphone is positioned as close to your mouth as possible without touching it. This helps the windproof and CVC noise reduction technologies work most effectively.
- Firm Mounting: When installing the unit, ensure the mounting bracket (either clip or adhesive) is very firm. A loose mount can lead to vibrations and affect sound quality or even cause the unit to detach.
- Regular Charging: To maintain battery health, avoid completely draining the battery frequently. Charge the unit regularly, especially before long rides.
9. Safety Information
- Always prioritize road safety. Do not operate the device in a way that distracts you from riding.
- Keep the volume at a level that allows you to hear ambient traffic sounds. Excessive volume can damage your hearing and impair your ability to react to hazards.
- Do not attempt to disassemble or modify the device. This may void the warranty and cause damage or injury.
- Keep the device away from extreme temperatures, open flames, and corrosive materials.
- Ensure the charging port cover is securely closed when not charging to maintain its waterproof rating.
10. Warranty and Support
Your TNICER G1EX intercom comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official TNICER website. Please retain your proof of purchase for warranty claims.