NEEWER RGB61

Contents

NEEWER Magnetic RGB Video Light RGB61 User Manual

Model: RGB61

1. Safety Tips

To prevent any damage to your product or the risk of personal injury, please read the instructions carefully and adhere to any safety precautions prior to using the product. Please retain this manual for future reference.

Battery Use Warning:

  1. Do not attempt to detach, modify, or repair the battery by yourself. Any unauthorized operation may cause battery leakage, overheating, burning, and other hazards.
  2. Be sure to use the provided or certified chargers to prevent overcharging and shortcuts.
  3. If unusual charging speed and indicator flashing occur, please stop charging and contact customer service immediately.
  4. Keep away from inflammable and explosive items.

2. Product Overview

The NEEWER RGB61 is a portable RGBWW fill light featuring a compact and clean design. It is equipped with 25 ultra-bright RGB LED bulbs, 18 x 2500K warm white, and 18 x 8500K cool white LEDs. It includes an integrated 2000mAh battery and offers dual color temperature, full color adjustment, and multiple scene modes for versatile lighting applications.

NEEWER Magnetic RGB Video Light RGB61 with accessories

Figure 2.1: NEEWER Magnetic RGB Video Light RGB61 and included accessories.

3. Product Illustration

Diagram of RGB61 showing power button, OLED display, control buttons, cold shoe slots, Type-C port, and light board

Figure 3.1: Detailed view of the RGB61 LED Camera Light components.

Key Components:

  • Power/Switch button: For turning the device on/off and navigating settings.
  • OLED display: Shows current light settings (CCT, HSI, FX modes, brightness, color temperature, hue, saturation).
  • ◄ / ► buttons: For adjusting values and navigating options.
  • Mode button (M): For switching between CCT, HSI, and FX modes.
  • Cold shoe slot: For mounting accessories.
  • Cold shoe locking ring: Secures the light to a cold shoe mount.
  • Diffuser: Softens the light output.
  • Type-C charging port: For charging the built-in battery.
  • Cold shoe support: Provides additional mounting options.
  • Light board: The LED panel.

4. Setup and Installation

4.1. Attaching the Diffuser

The light comes with a diffuser to soften the light output.

  • Without cold shoe interface: Insert the diffuser directly into the cold shoe connector and turn the locking ring to secure it.
  • With cold shoe interface: The screw underneath the device should be moved back slightly to create a small gap for the diffuser. Turn the locking ring to secure.

Note: It is advised against using the soft light diffuser when utilizing the side cold shoe slot.

4.2. Using the Cold Shoe Slot

The RGB61 features multiple cold shoe mounts for attaching to cameras, light stands, or other accessories.

  • Attaching to equipment: Remove the soft light diffuser first (if attached), then loosen the locking ring. Insert the cold shoe adapter into the groove, twist the locking ring to secure it in place, and then re-attach the soft light diffuser if desired.
  • Magnetic Attachment: The light has an integrated magnet at the rear, allowing it to be attached to any magnetic surface for flexible mounting.
RGB61 mounted on a camera rig with a microphone, showing its portable size and multiple cold shoe mounts

Figure 4.1: Portable and customizable mounting options for the RGB61.

5. Operating Instructions

5.1. Powering On/Off

  • To turn on: Long press the Power button (Power button icon).
  • To change settings: Short press the Power button.

5.2. Brightness Adjustment

  • In any mode, short press the Power button to change the level of brightness.
  • With the ">" indicator pointing to the brightness value on the OLED display, adjust the setting using the "◄" and "►" buttons.

5.3. Color Temperature Adjustment (CCT Mode)

  • Short press the "M" (Mode) button to switch to CCT mode.
  • Short press the Power button to toggle the ">" indicator to the color temperature value on the screen.
  • Use the "◄" and "►" buttons to adjust the color temperature (2500K-8500K).
RGB61 display showing CCT, HSI, and brightness adjustments

Figure 5.1: Visual representation of color temperature and brightness adjustments.

5.4. Hue Adjustment (HSI Mode)

  • Short press the "M" (Mode) button to switch to HSI mode.
  • Short press the Power button to toggle the ">" indicator to the "H" (Hue) value on the screen.
  • Use the "◄" and "►" buttons to adjust the hue (0-360° full color).

5.5. Saturation Adjustment (HSI Mode)

  • While in HSI mode, short press the Power button to toggle the ">" indicator to the "S" (Saturation) value on the screen.
  • Use the "◄" and "►" buttons to adjust the saturation (0-100).

5.6. Scene Modes (FX Mode)

  • Short press the "M" (Mode) button to switch to FX mode.
  • Short press the Power button to toggle the ">" indicator to the scene mode on the screen.
  • Use the "◄" and "►" buttons to enter this mode and select between the 20 available scene modes.
Grid of 20 special effects modes for the RGB61 LED light

Figure 5.2: Overview of the 20 special effects scene modes.

5.7. Charging

  • Connect the USB power cable (USB-A to USB-C) to the Type-C charging port on the light and a USB power source (5V/1A recommended).
  • The charging indicator on the OLED display will flash while charging and stop flashing when fully charged.
RGB61 showing USB-C charging port and battery life indicators

Figure 5.3: Charging port and battery information.

6. Maintenance

6.1. General Care

  • This fill light is not dustproof or waterproof. Avoid exposure to dust and moisture.
  • The video light is a precision device. Do not allow the lamp to fall to the ground, strike against other objects when transporting, or subject it to strong physical impact.
  • Please do not obstruct the vents to prevent a rise in the device's internal temperature, which could result in a fire or accident.
  • Be sure to turn off the power after using this fill light.
  • After use, do not place the product in a carry case immediately as residual heat will reduce the lifespan of the LED bulbs. Please allow it to cool down fully first.

6.2. Cleaning

  • Please use a dry soft cloth to clean the fill light.
  • You can use a cloth slightly moistened with some neutral detergent to remove stubborn dirt. Dry with a soft cloth.
  • Never use strong cleaning agents such as thinner, petrol, or alcohol, as these solvents can damage the protective layer of the surface.

7. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Connect to a power source using the USB-C cable and check the charging indicator.
  • Light not responding to controls: Try turning the device off and on again. If the issue persists, ensure the buttons are not obstructed or damaged.
  • Unusual charging behavior: If the charging speed is unusual or the indicator flashes erratically, stop charging immediately and contact customer support.

For any persistent issues or technical support, please refer to the warranty and support information provided in this manual or contact NEEWER customer service.

8. Specifications

FeatureDetail
ModelRGB61
Lighting TypeRGB Video Light
Number of LEDs61 (18 warm white, 18 cool white, 25 RGB)
Power6W
Maximum Illuminance800 Lux at 0.5m
Color Temperature Range2500K-8500K
Color Rendering Index (CRI)97+
Brightness Adjustment Range0% - 100%
RGB Color0-360° full color
Saturation Range0-100
Built-in Battery Type2000mAh lithium polymer battery (3.7V, 7.4Wh)
Charging Time2.6 hours
Continuous Lighting Time2.6 hours (at 100% brightness)
Charging VoltageUSB (5V 1A)
Control MethodPush button
Display TypeOLED display with white text on black background
Net Weight (without diffuser)Approx. 96g
Net Weight (with diffuser)Approx. 109g
Product Size66 × 79.65 × 30mm
Operating Temperature0°C ~ 40°C
Storage Temperature-10°C ~ 50°C
Relative Humidity20% ~ 80%
CertificationCE

* Specifications and design are subject to change without notice.

9. User Tips

  • Optimal Lighting Distance: For the best lighting results, keep the RGB61 close to your subject, ideally within a 6.6 feet (2 meter) distance.
  • Magnetic Mounting: Utilize the integrated magnet for quick and flexible placement on metal surfaces, expanding your creative shooting angles.
  • App Control: Please note that this specific model (RGB61) is controlled via its onboard buttons and OLED display, and does not feature app control functionality.

10. Warranty and Support

NEEWER products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official NEEWER website. If you encounter any issues or require technical assistance, please contact NEEWER customer support.

A detailed user manual in PDF format is available for download from the seller's product page or by scanning the QR code (if provided) in the packaging. You can also find it at: NEEWER RGB61 User Manual (PDF)

11. Product Video

Video: NEEWER RGB61 LED Video Light product demonstration, showcasing features like color adjustment, scene modes, magnetic design, and portability.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.