1. Product Overview
The VDIAGTOOL VD80BT LITE Wireless Diagnostic Tool is a professional automotive scanner designed for technicians, repair shops, and home garages. It features high-performance hardware, built-in Wi-Fi connectivity, and a suite of powerful diagnostic functions.
This tool interfaces with a vehicle's Electronic Control Unit (ECU) to retrieve diagnostic trouble codes (DTCs), access live data streams, and perform active tests. It supports various vehicle control systems including engine, transmission, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS/Airbag), Chassis, and Body systems.
Image: VDIAGTOOL VD80BT LITE Diagnostic Tool with VCI box, highlighting features like 2-Years Free Update, ECU Coding/PMI, DOIP, CAN FD, 2+64 Memory, 5000mAh 7.3V Battery, FCA, and ECU Online Code.
2. Safety Information
Always prioritize safety when operating or maintaining this unit. Read and understand all safety messages and instructions in this manual before use.
2.1 Safety Messages
Safety messages are provided to help prevent personal injury and equipment damage. Signal words indicate the hazard level:
- Danger: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders.
- Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders.
2.2 Safety Instructions
- When an engine is operating, ensure the service area is WELL VENTILATED or use a building exhaust removal system. Engines produce carbon monoxide, a poisonous gas.
- Always perform automotive testing in a safe environment.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, and test equipment away from moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area.
- Put the transmission in PARK (automatic) or NEUTRAL (manual) and engage the parking brake.
- Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Be cautious around ignition coil, distributor cap, ignition wires, and spark plugs, as these components create hazardous voltages.
- Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Keep the test equipment dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment.
- Do not drive the vehicle and operate the test equipment at the same time.
- Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions.
- To avoid damaging the test equipment or generating false data, ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.
- Do not place the test equipment on the distributor of the vehicle to avoid strong electro-magnetic interference.
3. Setup
3.1 What's in the Box
The VD80BT LITE package includes the following items:
Image: Contents of the VD80BT LITE box, showing the VD80BT Lite Diagnostic Tablet, VCI Box, US Power Charger, EU Power Charger, UK Power Charger, Quick Start Guide, Packing List, Type-C to Type-A Adapter, Type-C to Type-C Charger Cable, Hard Case, and Color Carton.
| Item | Quantity |
|---|---|
| VD80BT Lite Diagnostic Tool | 1 |
| VD80BT Lite VCI Box | 1 |
| Type-C to Type-A Adapter (Connecting to PC) | 1 |
| Type-C to Type-C Charger Cable | 1 |
| Charger Adapter US Standard | 1 |
| Charger Adapter EU Standard | 1 |
| Charger Adapter UK Standard | 1 |
| Color Carton | 1 |
| Quick Start Guide | 1 |
| Packing List | 1 |
| Hard Case | 1 |
Watch the unboxing and initial setup video:
Video: Unboxing and initial setup of the VDIAGTOOL VD80BT LITE, demonstrating how to unpack the device, connect the VCI box, and assemble the power adapter.
3.2 Power Sources
The VD80BT LITE Diagnostic Tool can be powered from its internal rechargeable battery pack or a standard AC power supply. The VCI Box is powered by connecting it to the vehicle's OBDII port.
- Internal Battery Pack: Provides approximately 3.5 hours of continuous operation when fully charged. Charging occurs when connected to the AC Power Supply.
- AC Power Supply: Connect the provided AC power supply to a standard AC outlet and then to the DC power supply input jack on top of the Diagnostic Tool.
3.3 Connecting the VCI Box
The VCI Box communicates with the Diagnostic Tool via Wi-Fi, offering faster and more stable data transmission than Bluetooth. If Wi-Fi is unavailable, you can connect the VCI Box directly to the Diagnostic Tool via a Type-C cable.
To establish communication with the vehicle:
- Turn on the Diagnostic Tool.
- Plug the VCI box into the vehicle's OBDII port. Ensure Power and Wi-Fi indicators light up.
- Turn on the ignition (do not start the engine) and run the diagnostic program on the Diagnostic Tool.
Image: Diagram illustrating the VCI box connected to the OBDII port and wirelessly communicating with the VD80BT LITE Diagnostic Tablet.
3.4 Product Activation and Registration
After the initial trial period, you must register and activate the Diagnostic Tool to continue using its full diagnostic programs. The video above demonstrates the registration and activation process.
- From the Welcome screen, select "Register" or "Log in" if you already have an account.
- Enter your email address and create a password (8-20 characters, combination of letters and numbers).
- Agree to the User Terms and submit your registration.
- Upon successful registration, the device will be activated, and you can start using it. The tool will remember your account information, so you won't need to log in every time.
3.5 Wi-Fi Connection
The Diagnostic Tool can connect to 2.4 GHz or 5.0 GHz frequency hotspots or Wi-Fi networks. To connect:
- Swipe up the hidden bottom toolbar and select the tab menu.
- Click Home > Network & internet.
- Switch on Wi-Fi connection.
- Click the Wi-Fi icon to view available networks.
- Select your desired Wi-Fi network and input the password.
If your home Wi-Fi is not working well, you can connect to your mobile phone's hotspot. For iOS users, go to Settings > Personal Hotspot > "Allow Others to Join" and "Maximize Compatibility". For Android users, go to Settings > Wireless & networks > Tethering & portable hotspot > Portable WLAN hotspot > Switch on hotspot > Configure WLAN hotspot > Encryption Type- WPA2 PSK > Show advanced options and ensure "Max connections allowed" is set.
Note:
- Wi-Fi connection is not required for diagnostics on most vehicle brands. However, some brands (e.g., Peugeot) require online server access, necessitating a Wi-Fi connection during diagnosis.
- The VCI Wi-Fi is distinct from your home Wi-Fi. You can connect to your home Wi-Fi for software upgrades while connected to the VCI.
3.6 Language Settings
The VD80BT LITE supports 22+ languages, including Arabic, Traditional Chinese, Danish, German, Greek, English, Spanish, Finnish, French, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Portuguese, Russian, Swedish, Thai, Turkish, and Vietnamese.
Image: Screenshot of the language selection menu on the VD80BT LITE Diagnostic Tablet, showing various flags and language options.
To change the language:
- Activate the device with your email.
- Switch the language in Settings ('Diagnosis' APP > Setting > Language).
- Click 'Updates' in Device to download language-specific software.
Note:
- If you cannot switch languages at will, please update the APP to the latest version ('Diagnosis' APP > Setting > APP).
- To change the menu language, you may need to send the S/N of the diagnostic tool to support@vdiagtool.com to get authorization for the desired language software program. After authorization, download all software programs under Updates.
3.7 USB Settings
This section allows you to set the USB Type-C mode between "Data Transfer Mode" and "Expansion Mode".
- Data Transfer Mode: To transfer data between the Android tablet and a PC.
- Expansion Mode: To work with extension accessories like an EEPROM adapter.
To connect to a PC for data transfer:
- Connect the Diagnostic Tool to a PC using the Type-C cable.
- Swipe down from the upper right or left corner of the Diagnostic Tool to bring up the drop-down menu and click "Android System. Charging this device via USB".
- Change the option from "No data transfer" to "File Transfer".
- On your PC, check for the connected device ("VD80BT Lite") to access its internal memory.
3.8 Red-Green Color Blindness Correction Mode
To enable red-green color blindness correction mode:
- Click the home button to switch to the main screen of the Android tablet.
- Click Settings > Accessibility.
- Swipe down to find "Color correction" and switch "Use color correction" to the ON position.
4. Operating Instructions
4.1 Diagnostic Screen Layout & Icons
When the Diagnostic Tool is turned on, the diagnostic program will run automatically, displaying the main diagnostic screen. A hidden toolbar at the bottom of the tablet can be revealed by swiping up, appearing for 3 seconds.
Image: Main diagnostic screen layout with icons for Auto Scan, Manual Diagnosis, Special Function, Report, Updates, More, Settings, Remote Control, and Service Center.
Key icons on the diagnostic screen include:
- Auto Scan: Automatically detects and decodes the VIN, then comprehensively scans all available vehicle electronic control modules.
- Manual Diagnosis: Allows manual navigation to select vehicle make, model, year, and configurations for diagnostics, including DEMO program and OBDII tests.
- Special Functions: Accesses commonly performed maintenance services.
- Report: Includes diagnostic reports, data playback, and data view functions.
- Updates: Downloads diagnostic software programs.
- More: Accesses user account settings, workshop profile, subscription period, firmware info, endoscope, and user manual (PDF).
- Settings: Adjusts language, units, USB mode, OS settings, volume, brightness, App version, OS version, Serial Number, and VCI number.
- Remote Control: Initiates TeamViewer for remote assistance.
- Service Center: Provides contact methods and social media links for support.
4.2 Diagnosing Vehicles
The Diagnostic Tool communicates with the vehicle's electronic control systems to retrieve DTCs, view PID data, perform active tests, and execute various resets, relearns, and adaptations. The Diagnosis icon is located on the Home screen.
To identify a vehicle for diagnostics, you have four options:
- Auto Scan: Click the "Auto Scan" icon. The tool will scan the VIN and decode it automatically.
- Manual Diagnosis: Click the "Manual Diagnosis" icon, then the VIN icon. Select "Manual Input" to enter the 17-digit VIN manually.
- Automatic Detection: Click "Manual Diagnosis", select the region (e.g., "Americas"), then the vehicle brand (e.g., "CADILLAC"), and choose "Automatic Detection".
- Manual Selection: If other methods fail, select "Manual Selection" under "Manual Diagnosis" to manually choose the vehicle's make, model, and year. This is the most reliable option.
Important:
- Auto Scan and Automatic Detection may not work on all vehicles.
- Special Functions on the main diagnostic screen are not universally available to all vehicles. Compatibility depends on the vehicle VIN, make, model, and year.
4.3 OBDII/EOBD Functions
The OBDII/EOBD function allows access to generic emission-related data, including DTCs, MIL status, and monitor status. It supports 5 communication protocols: SAE J1850 PWM, SAE J1850 VPW, ISO 14230-4 (KWP2000), ISO 9141-2, and ISO 15765-4/SAE J2480.
To access OBDII/EOBD data:
- Click "Manual Diagnosis" on the main diagnostic screen.
- Select the region where the vehicle manufacturer is originated.
- Click the "OBDII" icon.
The OBDII/EOBD menu includes:
- Read Trouble Code: Displays current, pending, and permanent emission-related DTCs.
- Clear Trouble Code (Mode $04): Erases all emission-related diagnostic data.
- Live Data (Mode $01): Displays current emission-related data from the ECM.
- Read Freeze Frame (Mode $02): Displays a snapshot of critical parameter values when a DTC was set.
- I/M Readiness (Smog Check): Checks the readiness of the monitoring system for emissions certification.
- O2S Monitoring Test (Mode $05): Checks the integrity of oxygen sensors.
- On-Board Monitor Test (Mode $06): Views results of on-board monitor tests.
- Component Test (Mode $08): Enables bidirectional control of the ECM for testing components.
- Read Vehicle Information (Mode $09): Displays VIN, calibration ID, and calibration verification number.
4.4 Live Data Display and Graphing
The tool allows viewing real-time PID (Parameter ID) data from various sensors. You can view data in a list, individual graphs, analog dashboards, and custom lists of up to 8 PID data points.
Image: 8-in-1 Live Data Display, allowing simultaneous monitoring of eight real-time data streams for efficient troubleshooting.
- Individual PID Data Graphing: Click the blue arrow icon to view individual PID data graphs.
- Individual PID Data in Analog Dashboard: Click the meter icon to view PID values in an analog dashboard.
- Set Maximum & Minimum Value Alarms: Set alarms for PID data to easily spot values outside the normal range.
- Zoom In & Zoom Out & View In Full Screen: Use magnifier icons to zoom in/out on X and Y axes of graphs.
- Custom Up to 8 PID Data: Select up to 8 PID data points for a custom real-time display.
- 8-In-1 Graphing: Merge individual graphs into one screen for comparison.
- Fold & Unfold PID Data Name: Fold the PID data name list to view merged graphs on a bigger screen.
- Data Recording & Playback: Record PID data for later review using the "Data Playback" function.
4.5 Bi-Directional Control (Active Test)
This function allows the Diagnostic Tool to send commands to the vehicle's ECU to perform active tests on various components. This helps in accurately and quickly locating faulty components.
Image: Bi-Directional Test diagram illustrating the ability to send commands to vehicle components such as windows, mirrors, headlights, horns, and wipers for active testing.
Note: Available Actuation Tests vary by car manufacturer, model, and year. Please check compatibility.
4.6 Special Functions & Maintenance Services
The tool offers over 28 special functions for common maintenance services. These functions often involve menu-driven executive commands with on-screen instructions.
Image: Menu showing 28+ Maintenance Services, including Oil Reset, ABS Bleeding, SAS Reset, EPB Reset, BMS Reset, Injector Coding, A/C Relearn, Throttle Reset, Airbag Reset, Coolant Bleeding, DPF/GPF Reset, Power Balance, VGT Relearn, Gearbox Match, Headlight, Tire Size Reset, Suspension, Language Change, Window Initialization, A/F Reset, Control Unit Reset, HV Battery, Rain/Light Sensor, Seat Calibration, Stop/Start Reset, EGR Relearn, and Crank Sensor Relearn.
Note: Special Functions vary across vehicle makes, models, and year. Please check compatibility.
- Oil Reset: Resets the engine oil life system after an oil change.
- EPB (Electronic Parking Brake): Service/reset procedure for EPB systems and brake pads.
- ABS Bleeding: Removes air from ABS brake lines to restore brake sensitivity.
- BMS Reset: Resets the car battery monitoring unit after battery replacement.
- TPMS Reset: Resets tire pressure sensors and turns off the TPMS MIL.
- Injector Coding: Codes new injector numbers into the ECU.
- SAS (Steering Angle Sensor): Calibrates the steering angle sensor.
- Airbag Reset: Resets airbag data to clear collision fault indicators.
- DPF (Diesel Particulate Filter): Clears PM from the DPF filter.
- Gearbox Match: Completes gearbox self-learning after disassembly or repair.
- Crank Sensor Relearn: Performs tooth learning for the vehicle.
- Headlight: Initializes adaptive headlight systems.
- Tire Size Reset: Sets size parameters for modified or replaced tires.
- Suspension: Adjusts vehicle body height sensor for level calibration.
- Language Change: Changes the system language of the vehicle central control panel.
- Window Initialization: Recovers ECU initial memory for power windows.
- A/F Reset: Sets or learns Air/Fuel ratio parameters.
- Control Unit Reset: Resets ECU software for VW control modules.
- HV Battery: Checks the voltage of individual battery packs.
- Rain/Light Sensor: Adjusts initial parameters for rain/light sensors.
- Seat Calibration: Matches seats with memory function.
- Stop/Start Reset: Opens or closes automatic Start/Stop function.
- EGR Relearn: Learns the EGR valve after cleaning or replacement.
- VGT Relearn (Turbocharging Matching): For learning after replacement of turbocharger system components.
4.7 ECU Coding & PMI
The tool offers advanced ECU coding capabilities to re-flash vehicle control modules, update software, and reprogram adaptive data after repairs or replacements. This helps optimize vehicle performance, customize settings, and resolve issues related to drivability, fuel efficiency, and fault codes.
Image: ECU Coding diagram illustrating online and offline coding options, with benefits like unlocking hidden features, matching components, optimizing performance, blocking annoying features, and improving fuel efficiency.
- ECU Coding Capability: For VW/AUDI/SKODA ONLY, performs online Coding, Component Matching, Adaptive Data Reset, and Flash Hidden Functions.
- Flash Hidden Functions (ECU Configuration): For BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN, refreshes hidden functions to reprogram adaptive data, activates higher-level car functions, and disables annoying features.
- PMI (Programmable Module Installation) / ECU Offline Programming: Writes new software, firmware, or updated versions to the ECU. Applicable to Ford, Lincoln, and Mazda models.
4.8 VAG Guided Function
The VD80BT LITE provides detailed, step-by-step procedures and guidance for specific repair tasks on VAG (Volkswagen Audi Group) vehicles. This includes replacing parts, calibrating sensors, and resetting systems, ensuring technicians follow correct procedures and improve repair accuracy.
Image: V.A.G Guided Function steps (Enter Guided Menu, Skip Security Access Code, Skip Channel Number, Matching/Calibration/Settings) and compatible brands: VW, Audi, Skoda.
4.9 FCA AutoAuth / CANFD / DoIP Compatibility
The tool supports advanced protocols like CAN-FD and DOIP for ultra-fast, high-capacity data transmission and seamless integration with modern vehicle electronic systems. It also supports FCA AutoAuth for precise diagnostics on FCA vehicles (FCA diagnostic account not provided).
Image: FCA AutoAuth, CAN-FD, and DOIP compatibility details. FCA AutoAuth supports Chrysler, Dodge, Jeep, Alfa Romeo, Fiat. CAN-FD supports 2020+ GM, Cadillac, Buick. DOIP supports BMW, Land Rover, Jaguar.
Note: For specific FCA/VAG/CAN FD/DOIP and vehicle compatibility, please consult VDIAGTOOL official store before purchasing.
4.10 Pre-Scan and Post-Scan & Diagnostic Report 2.0
The pre-scan and post-scan functions provide diagnostic reports before and after vehicle maintenance. The tool records the vehicle's status before maintenance and provides a report after maintenance to confirm problem resolution.
Image: Pre-Scan and Post-Scan process on the diagnostic tablet, showing a system scan result with DTC status before and after repair.
- Pre-Scan Function: Reads the vehicle's control module for existing fault codes before repairs, providing a baseline report.
- Post-Scan Function: Scans the vehicle again after repair to confirm fault codes are cleared and no new ones are generated.
- Upgraded Diagnostic Report 2.0: Allows creation of comprehensive reports with four types, icon display for main systems, and customizable layouts with shop logos.
4.11 AI-Assisted Diagnostics
The VD80BT LITE features an intelligent AI system that instantly retrieves and analyzes fault codes, providing precise and customized solutions to simplify the repair process. The built-in AI chatbot offers real-time troubleshooting support.
Image: AI Diagnostic Assistant interface on the tablet, showing an AI chatbot providing automotive repair assistance and analysis of fault codes.
Note: AI suggestions are for reference only and may vary by vehicle and fault code; always follow factory manuals and professional guidance.
4.12 Exporting Data
You can export PID data as CSV files for storage or later review. To do this:
- In the PID data screen, click "Export Data" to start collecting data.
- Click "OK" to finish collection.
- Go to Main Diagnostic Screen > Report > Data View to view the CSV file.
- To export the CSV file to a PC, connect the Diagnostic Tool via USB Type-C cable, enable "Data Transfer", and copy the file from the tool's internal storage (My computer > VD80BT Lite > Internal Shared Storage > Diagnosis > csv_records).
- To share via Bluetooth, click "More" > "Share" > "Bluetooth" from the bottom toolbar.
5. Maintenance
5.1 Software Updates
Software updates are crucial for adding new features, expanding vehicle coverage, and improving software performance. The subscription is a yearly fee for all compatible makes and models.
You can update software programs via Wi-Fi or mobile phone hotspot. If "Network abnormal" appears, try another Wi-Fi or contact support.
To update software:
- Update All: Click "Update All" at the bottom right of the update menu.
- Update Individual: Click the "↑" icon next to the specific software program. If interrupted, click the icon again to resume.
Watch the video for a demonstration of the update process:
Video: Demonstration of device registration and software update process.
Note: Even after the free update period expires, you can still use the last updated software version.
5.2 Deleting Software Programs
If the diagnostic tablet becomes slow due to excessive memory usage, you can delete rarely used software programs to free up space.
To delete:
- Click "Manual Diagnosis" > Select Region.
- Press and hold the vehicle maker icon to activate the job menu.
- Click "Delete" to remove the software program.
Important: Do NOT delete software programs if the subscription is near expiration. It's recommended to download all deleted programs before the subscription expires.
5.3 Cleaning the Device
Keep the test equipment dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
6. Troubleshooting
6.1 Common Issues and Solutions
- Battery not charging / Device not powering on: Charge for over an hour, unplug, then press and hold the power button for 15 seconds. Repeat several times if necessary. If the issue persists, contact support.
- Cannot update / Network issues: Check your router firewall settings. If using Wi-Fi, ensure it's WPA2 (not WPA3) and not blocking outgoing network traffic. Try switching to a mobile phone hotspot for activation and updates.
- Auto VIN not working: Auto VIN may not cover all vehicles. Try turning on the ignition (without starting the engine) for auto scan. For older vehicles, start the engine. Alternatively, manually input the VIN or use Automatic Detection/Manual Selection.
- Report shared successfully but email not received: Reports are sent from noreply@service-vdiagtool.com. Check your spam folder. If using Gmail, you may need to whitelist the sender.
- 'License exception' or 'Failed' error message: Delete the software programs by pressing and holding, then re-download them under 'Updates'. If the issue persists, contact support with your S/N.
- 'Registration failure' during activation: Try using a mobile hotspot (recommended) or a different network to activate.
6.2 Emergency Shutdown
During normal operation, turn off the Diagnostic Tool using the "Turning Off" procedure (press and hold power button for 3 seconds). The emergency shutdown procedure should only be used if the Diagnostic Tool is unresponsive or exhibits erratic operation. To force an emergency shutdown, press and hold the Power button for five seconds until the Diagnostic Tool turns off.
Important: Using the emergency shutdown procedure while communicating with the vehicle ECM may lead to ECM problems on some vehicles.
7. Specifications
Image: Key specifications of the VD80BT LITE Diagnostic Tool, including Wi-Fi Connection, 64G ROM, 8-inch Touchscreen, 1280x800 Resolution, and 5000mAh Battery.
| Item | Description/Specification |
|---|---|
| Display | 8 Inch Touch Screen, 1280×800 Resolution |
| Operating System | Android 10.0 |
| Processor | Quad-Core Processor 1.5GHz |
| Memory | 4G RAM, 64G ROM |
| Connectivity | Bluetooth 4.1, Wi-Fi (2.4GHz & 5Ghz), Type-C |
| Sensor | Gravity Accelerometer/Ambient Light Sensor |
| Audio | Microphone |
| Speaker | Built-In Speaker |
| Camera | 8 Mega Pixel (Rear) |
| Battery | DC 7.3V Rechargeable Li-ion battery, 5000mAh |
| Tested Battery Life | 3.5 hours |
| Power Supply Input | 5.0V 3.0A (AC Adapter Input: 100-240V, Adapter Output: 5.0V 3.0A) |
| Operating Voltage | 9V-36V |
| Dimensions | 10.39×6.06×1.39 in (264*154*35.5mm) |
| Weight (Including Battery) | 2.34lbs (1.06kg) |
| Gross Weight | 4.96lbs (2.25kg) |
| Operating Temp Range (Ambient) | 32°F ~ 104°F (0°C ~ 40°C) |
| Storage Temp (Ambient) | 14°F ~ 122°F (-10°C ~ 50°C) |
| Operating Humidity | <90% |
7.1 Vehicle Coverage
Image: Vehicle coverage map and list of supported brands, including America, Asia, and Europe, covering over 150 brands and 10,000+ cars.
The VD80BT LITE supports over 85 car makers, 150+ brands, and covers 10,000+ cars across various regions:
- Europe Cars: DEMO, VW, MINI, LANDROVER, SEAT, FERRARI, FORD, OPEL, ALFA, ROMEO, VOLVO, ABARTH, SMART, BMW, FIAT, LANCIA, RENAULT, ASTONMARTIN, GAZ, MASERATI, MEREDES, UAZ, SKODA, CITROEN, DACIA, AUDI, JAGUAR, PORSCHE, PEUGEOT.
- Russian Cars: ZAZ, IZH, PAZ, UAZ, VAZ, GAZ, Lada.
- America Cars: DEMO, GM, FORD, CADILLAC, CHEVROLET, GMC, HUMMER, JEEP, SATURN, PONTIAC, LINCOLN, DODGE, CHRYSLER, BUICK.
- Asia Cars: DEMO, TOYOTA -LEXUS, ISUZU, MAZDA, KIA, INFINITI, ACURA, NISSAN, RENAILTSAM, HYUNDAICY, HYUNDAI, HONDA, SUBARU, SUZUKI, MITSUBISHI, SSANGYONG.
- Australia Cars: DEMO, Ford, Honda.
- China Cars: DEMO, JAC, CHERY, GEELY, GREAT WALL, BYD, LIFAN.
Note: Before purchasing, you can contact the seller or check the models and functions supported by the device on the official website: https://www.vdiagtool.com/support/vehicle-coverage
8. Warranty & Support
8.1 Limited Two Years Warranty
The VDIAGTOOL VD80BT LITE is warranted against defects in materials and workmanship for two years (24 months) from the date of delivery to the buyer. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective tool is repair or replacement. VDIAGTOOL is not liable for consequential or incidental damages.
8.2 Technical Assistance
For technical assistance, you can reach out via:
- Website: www.vdiagtool.com
- E-Mail: support@vdiagtool.com
- Phone: 1-213-355-7171 (United States)
- Online Contact Form: https://www.vdiagtool.com/support/tech-support
You can also schedule remote assistance by filling out the "Remote appointment" form on the website.
8.3 Service Center
The Service Center provides various ways to contact VDIAGTOOL for warranty claims, tech support, tutorials, marketing cooperation, business opportunities, or to provide feedback.
Remote Control: This function allows our tech support team to control the Diagnostic Tool remotely to check possible problems or assist with navigation. Ensure the tool is connected to Wi-Fi, then click "Remote Control" to run TeamViewer. Provide the TeamViewer ID to the support team.
8.4 Social Media
Follow VDIAGTOOL on social media for updates and community support:
- Facebook Page: Search for "vdiagtool"
- Facebook User Group: Search for "VDIAGTOOL OFFICIAL User Group"
- Instagram: Search for "vdiagtool_official"
- TikTok: Search for "vdiagtool_us"
- YouTube: Search for "Vdiagtool Official"
9. User Tips
- Software Updates: Even if your free update period expires, the scanner remains functional with its last updated software. Consider updating before the free period ends to ensure you have the latest features and vehicle coverage.
- Third-Party Apps: The diagnostic tool does not support installing Google Play Store. While you can install third-party APK files, it is not recommended as it may slow down the device's performance.
- Network Understanding: The VCI Wi-Fi is separate from your home Wi-Fi. You can connect to your home Wi-Fi for software updates while the VCI is connected to the vehicle.
- Language Change: If you need to change the menu language, contact VDIAGTOOL support with your device's serial number to request language software authorization.
- Charging Issues: If the device isn't charging, ensure it's plugged in for at least an hour. If problems persist, try unplugging and holding the power button for 15 seconds to reset.