Introduction
The Staniot WSR300 Wireless Strobe Siren is a powerful and versatile security device designed to enhance your home or office alarm system. Featuring a loud 120dB alarm and a bright strobe light, it effectively deters intruders and alerts occupants. Its waterproof and tamper-proof design makes it suitable for both indoor and outdoor installations. The siren includes a built-in 5000mAh battery and supports optional solar panel charging for continuous operation.

Figure 1: Staniot WSR300 Wireless Strobe Siren
Key Features
- High-Decibel Alarm: Emits a powerful 120dB sound to effectively deter intruders.
- Strobe Light Flash: Visual deterrent accompanies the acoustic alarm.
- Waterproof Design: Suitable for outdoor installation, resistant to rain and harsh weather.
- Built-in Battery: Equipped with a 5000mAh lithium battery for reliable power.
- Optional Solar Charging: Can be connected to an external solar panel for continuous charging.
- Wired & Wireless Configuration: Offers flexible integration with alarm systems.
- Tamper-Proof: Designed to prevent unauthorized removal or disabling.
- Adjustable Volume: 5 levels of alarm volume (120dB, 100dB, 80dB, 60dB, Mute).
- Two Alarm Tones: Provides options for different alert preferences.
- Compatibility: Works with Staniot alarm hosts (Secpanel 3, Secpanel 5, Secpanel 7, Secpanel 7 Pro, SecCube 3) and Tuya smart home platform.

Figure 2: Visual representation of key features
Package Contents
Please verify the contents of your package upon receipt. The Staniot WSR300 Strobe Siren is available in two options:
Option A: Strobe Siren Only
- Strobe Siren x 1
- User Manual x 1
- Screw Pack x 1
- Charger x 1

Figure 3: Package contents for Siren Only option
Option B: Solar Strobe Siren Kit
- Strobe Siren x 1
- Solar Panel x 1
- User Manual x 1
- Screw Pack x 1
- Charger x 1

Figure 4: Package contents for Solar Siren Kit option
Setup
1. Physical Installation
The Staniot WSR300 siren can be installed both indoors and outdoors. Choose a location where the siren is visible and its sound can be heard effectively. For outdoor installation, ensure it is mounted securely to withstand weather conditions. Use the provided screw pack for mounting.

Figure 5: Multiple application scenarios for installation
2. Internal Components and Connections
To access the internal connections, carefully open the siren casing. The internal board provides terminals for wired input, DC power (6V-15V 1A), and an optional solar charging interface (5V 1A). Ensure the battery switch is in the 'ON' position for operation.

Figure 6: Internal view of the siren with connection points labeled
3. Solar Panel Connection (Optional)
If you have the Solar Strobe Siren Kit (Option B), connect the solar panel to the designated solar charging interface (5V 1A) on the siren's internal board. Position the solar panel in a location that receives ample direct sunlight for optimal charging.

Figure 7: Solar charging panel
4. Pairing with Alarm Panel
The WSR300 siren is designed to work in conjunction with a compatible Staniot alarm host (e.g., Secpanel 3, Secpanel 5, Secpanel 7, Secpanel 7 Pro, SecCube 3). Follow these steps to pair the siren with your alarm panel:
- Ensure the siren's battery switch is ON.
- On your alarm panel, navigate to the "Accessory" or "Siren" pairing menu.
- Select the option to "Pair Siren" or similar.
- The alarm panel will send a pairing code. The siren will indicate successful pairing (e.g., with a flash or sound).
- Once paired, the siren will synchronize its armed/disarmed state with the alarm panel.

Figure 8: Working principle diagram
Video 1: Demonstration of siren pairing and alarm activation with an alarm panel.
Operating Instructions
1. Arming and Disarming
The siren's armed/disarmed state is controlled by your connected Staniot alarm panel. When the alarm panel is armed (e.g., "Away" or "Home" mode), the siren will also enter the armed state. When the alarm panel is disarmed, the siren will disarm.
2. Alarm Activation
If a sensor connected to your alarm panel is triggered while the system is armed, the alarm panel will activate the siren. The siren will then emit a loud sound and flash its strobe light to alert of a potential intrusion.

Figure 9: Siren activating during an intrusion scenario
3. Adjusting Alarm Volume
The siren offers 5 adjustable volume levels: 120dB (Default), 100dB, 80dB, 60dB, and Mute. To adjust the volume, use the "Volume Touch Button" located on the internal board (refer to Figure 6). Press the button to cycle through the volume levels. Select a lower decibel for indoor use to avoid startling occupants, and the maximum decibel for outdoor use for effective deterrence.

Figure 10: Recommended volume settings for indoor vs. outdoor use
Maintenance
1. Battery Management
The siren is equipped with a built-in 5000mAh lithium battery. For optimal performance, ensure the battery is adequately charged. If using the solar panel, regularly check that the panel is clean and unobstructed to maximize charging efficiency. If not using solar charging, ensure the siren is connected to the provided charger periodically to maintain battery life.

Figure 11: Built-in 5000mAh battery for extended operation
2. Waterproof and Tamper-Proof Features
The siren is designed with excellent waterproof performance, making it suitable for outdoor use. Periodically inspect the casing for any signs of damage or wear that could compromise its waterproof seal. The tamper switch (refer to Figure 6) is designed to trigger an alarm if the siren is forcibly removed from its mounting. Ensure the siren is securely mounted to prevent false tamper alarms.

Figure 12: Siren's waterproof capability
Troubleshooting
- Siren not pairing with alarm panel: Ensure the siren's battery switch is ON. Verify that your alarm panel is in pairing mode and that the siren is within range. Check for any obstructions or interference.
- Siren not alarming: Confirm that the alarm panel is armed and that the sensors are functioning correctly. Check the siren's volume setting; it might be set to mute.
- Siren constantly alarming (false alarms): Check the tamper switch for proper installation. Ensure the siren is securely mounted and not being accidentally triggered. Review your alarm panel's event log for clues.
- Siren not charging via solar panel: Ensure the solar panel is clean, unobstructed, and receiving direct sunlight. Verify the connection between the solar panel and the siren.
- Compatibility issues: The siren is compatible with Staniot alarm hosts (Secpanel 3, 5, 7, 7 Pro, SecCube 3) and the Tuya platform. If using a different system, compatibility cannot be guaranteed.
Specifications
| Parameter | Value |
|---|---|
| Power supply | DC6V-15V 1A |
| Built-in battery | 3.7V 5000mAh lithium battery |
| Standby current | <10mA |
| Alarm current | <1000mA |
| Wired zone | 2 (NC, NO) |
| Alarm volume | 120dB (5 levels adjustable) |
| Working temperature | -20°C ~ +50°C |
| Relative humidity | <95% (no condensation) |
| Wireless parameters | 433MHz, eV1527 |
| Solar charging panel | Optional |
| Product size | 270 × 180 × 47mm |
Figure 13: Product Specifications Table
User Tips
- For indoor use, consider setting the siren to a lower decibel level (e.g., 60dB or 80dB) to avoid startling family members, especially children or pets.
- When installing outdoors, ensure the siren is in a prominent location and set to the maximum 120dB volume for optimal deterrence.
- If using the solar charging option, regularly clean the solar panel to ensure it can efficiently convert sunlight into power.
- The siren is compatible with the Tuya smart home platform, allowing for integration with other smart devices.
Warranty and Support
For any technical assistance, warranty claims, or further inquiries regarding your Staniot WSR300 Wireless Strobe Siren, please contact Staniot customer support through your purchase platform or the official Staniot website. Please have your product model number and purchase details ready when contacting support.