1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your FDIK Air Diesel Heater. Designed for various vehicles and spaces, this autonomous heater ensures warmth and comfort in cold conditions. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the heater:
- Ensure proper ventilation during operation to avoid carbon monoxide poisoning.
- Do not operate the heater in enclosed spaces without adequate airflow.
- Keep flammable materials away from the heater's exhaust and air outlet.
- Ensure all electrical connections are secure and correctly wired according to the diagram.
- Only use diesel fuel for this heater. Do not use gasoline or other fuels.
- Regularly inspect the exhaust system for leaks or blockages.
- Do not modify the heater or its components. Use only original replacement parts.
- Disconnect power before performing any maintenance or repairs.
3. Package Contents
Verify that all items listed below are included in your package:

- Heater Host Unit
- LCD Controller Switch
- Remote Control
- Silencer
- Oil Pump
- Exhaust Pipe
- Tubing (for fuel and air)
- 8.0L Fuel Tank
- Wire Harness
- 75mm Wind Head (Air Outlet)
- Air Filter
- Oil Filter
- Rubber Pad
- Fixed Plate
- Oil Pump Clamp
- Screw Accessory Kit
- User Manual (this document)
4. Specifications
The FDIK Air Diesel Heater is available in 2KW and 5KW models, supporting both 12V and 24V systems. Key specifications are detailed below:

| Feature | 5000W Model | 2000W Model |
|---|---|---|
| Power | 5000W | 2000W |
| Voltage | 12V or 24V | 12V or 24V |
| Fuel | Diesel | |
| Shell Material | Plastics + Aluminum | |
| Circuit Board | FDIK Version Smart Motherboard | |
| Fuel Pump | 22ml Pulse Pump | |
| Fuel Consumption | 0.1-0.46 L/H | 0.1-0.35 L/H |
| Air Volume | 60-185 m³/h | 60-90 m³/h |
| Operation Temperature | -40°C to 40°C | |
| Item Length | 37.8 cm | 33.5 cm |
| Item Width | 14.1 cm | 12.0 cm |
| Item Height | 15.0 cm | 11.5 cm |
| Item Weight | Approx. 6 kg | |
| External Testing Certification | CE | |

5. Installation
Proper installation is crucial for the safe and efficient operation of your FDIK Air Diesel Heater. If you are unsure about any steps, consult a qualified professional.
5.1 General Installation Guidelines
- Choose a mounting location that is stable, dry, and provides adequate clearance for air intake and exhaust.
- Ensure the heater is securely fastened to prevent movement during vehicle operation.
- The air inlet and air outlet must be reserved for air circulation.
- The oil pump should be installed at a 45° angle to ensure proper fuel flow.
- All fuel lines must be properly secured and free from kinks or leaks.
- The exhaust pipe must be routed away from flammable materials and directed outside the vehicle/space.
5.2 Wiring Diagram
Follow the wiring diagram carefully to ensure correct electrical connections. The positive and negative main power lines should be connected directly to the car battery or the main power source.

5.3 Recommended Installation Positions
The heater can be installed in various locations depending on the vehicle type and available space. Ensure the chosen location protects the heater from water splashes and allows for proper air circulation.
- Trunk: On the driver's legroom, on the back wall of the cab, under the passenger seat, or within the toolbox.
- RV: In front of the passenger seat, between the driver seat and passenger seat, under the passenger seat, or in the trunk.
- 5 Seater/7 Seater Car: The heater is mainly installed in the trunk or under the passenger seat of the vehicle. If it cannot be installed, place it under the vehicle, but beware of splashing.
- Excavator: Inside the driver's seat, on the back wall of the cab, or inside the protection box.
6. Operation
The FDIK Air Diesel Heater operates by drawing in cold air, passing it through a heated aluminum body, and then blowing out warm air. Fuel (diesel) is supplied to a combustion chamber where it is ignited by a glow plug, heating the aluminum cylinder.

6.1 LCD Switch Control
The LCD switch serves as the primary control interface for your heater. It allows you to:
- Adjust Temperature: Set your desired temperature between 16°C and 35°C. The heater will automatically regulate its output to maintain this temperature, functioning as a thermostat.
- Adjust Power: Control the heating power output (typically between 1KW and 5KW, depending on model).
- Monitor Status: View current temperature, power settings, and diagnostic information.
- Timer Function: Some models and controllers support a timer function to program power-on at a given time. Refer to your specific controller's manual for detailed programming instructions.

6.2 Remote Control
The included remote control provides convenient operation from a distance. It typically allows for basic functions such as turning the heater on/off and adjusting temperature/power. For specific instructions on programming the remote control, please refer to the separate remote control manual or the detailed instructions provided with your LCD switch.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your heater.
- Clean Air Filter: Periodically check and clean the air filter to ensure unrestricted airflow. A clogged filter can reduce efficiency and potentially cause overheating.
- Inspect Fuel Lines: Check fuel lines for any signs of wear, cracks, or leaks. Replace damaged lines immediately.
- Exhaust System Check: Ensure the exhaust pipe is clear of obstructions and securely attached. Look for any signs of corrosion or damage.
- Electrical Connections: Verify that all electrical connections are tight and free from corrosion.
- Glow Plug: While designed for durability, if ignition issues occur, the glow plug may need inspection or replacement.
- General Cleaning: Keep the exterior of the heater clean and free from dust and debris.
8. Troubleshooting
Before contacting support, try these common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not start | No power, low battery voltage, fuel issue, glow plug fault. | Check power connections, ensure battery voltage is sufficient (above 10.5V for 12V systems), check fuel level and pump, inspect glow plug. |
| No heat output | Air intake/outlet blocked, fuel supply issue, fan malfunction. | Clear any obstructions, check fuel lines and pump, ensure fan is operating. |
| Excessive smoke | Poor combustion, incorrect fuel mixture, clogged exhaust. | Ensure proper fuel quality, check exhaust for blockages, inspect combustion chamber. |
| Unusual noise | Loose components, fan obstruction, motor issue. | Check for loose parts, ensure fan is clear, inspect motor assembly. |
| Overheating protection activated | Blocked airflow, fan failure, sensor issue. | Ensure air intake/outlet are clear, check fan operation, consult manual for sensor diagnostics. |
9. User Tips
- Fuel Type: This heater is designed exclusively for diesel fuel. Do NOT use gasoline or other fuel types, as this can cause damage and is a fire hazard.
- Voltage Compatibility: Ensure you select the correct 12V or 24V model for your vehicle's electrical system. The heater is available in both voltage options.
- Remote Control Programming: If you encounter difficulties programming the remote control or setting the timer, refer to the specific instructions for your LCD controller model. These often involve a sequence of button presses on the controller itself.
- Thermostat Functionality: The LCD switch allows you to set a target temperature, and the heater will modulate its output to maintain that temperature, effectively acting as a thermostat.
10. Frequently Asked Questions (FAQ)
- Q: Does this device also work on gasoline?
- A: No, this heater is specifically designed to operate on diesel fuel only. Using gasoline can cause severe damage to the unit and poses a significant safety risk.
- Q: Does it have a thermostat, meaning does it maintain a set temperature?
- A: Yes, the LCD control switch allows you to set a desired temperature (e.g., 16°C - 35°C). The heater will then automatically adjust its operation to maintain that temperature, functioning as a thermostat.
- Q: How do I program the remote control?
- A: Programming instructions for the remote control are typically found in the detailed manual for your specific LCD controller. This usually involves a pairing sequence initiated on the main control panel.
- Q: Which controller supports power-on mode at a given time (timer function)?
- A: Many FDIK LCD controllers include a timer function. Please consult the specific manual for your LCD switch model to determine if this feature is available and for instructions on how to set it.
- Q: Can it be connected to a 24V power supply?
- A: Yes, FDIK Air Diesel Heaters are available in both 12V and 24V versions. Ensure you have purchased the correct voltage model for your vehicle's electrical system.
11. Warranty and Support
FDIK products are built with quality and reliability in mind. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official FDIK website. Please have your model number (FDIK-C24) and purchase date ready when contacting support.