1. Introduction
The HUGEROCK T80 is an 8-inch industrial rugged Android tablet PC designed for demanding professional environments. It features a robust, drop-proof and dust-proof construction, an 8-inch IPS/AFFS FHD sunlight-readable display, and powerful processing capabilities. The T80 supports various optional modules including barcode/QR code readers, RFID, fingerprint sensors, and NFC, making it highly adaptable for applications in logistics, medical services, city management, agriculture, industrial manufacturing, and more.
2. Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the device to severe impacts, despite its rugged design.
- Use only the specified charger (5.0V 2A-10W) to prevent damage and ensure safety.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Keep the device away from strong magnetic fields.
- Clean the device with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
3. Product Overview
3.1 Device Appearance

The image above shows the front view of the HUGEROCK T80 tablet, highlighting its robust design and display.
3.2 Component Identification

This diagram illustrates the various components and ports of the T80 tablet:
- Type-A Port (Sealed Cover)
- M8 Aviation Connector (Optional)
- Front Camera
- Light Sensor
- Charge Lamp
- Fingerprint Module (Optional)
- Home Button
- Back Button
- Volume Down Button
- Volume Up Button
- Scan Button / Defined Button
- Defined Button
- Speaker
- Power Button
- SIM/TF Card Slot (Sealed Cover)
- Type-C Port (Sealed Cover)
- SMA Interface
- Barcode Module
- Microphone
- 4-pin Pogo Pin (Magnetic, Optional)
- Main Camera
- 10-PIN Expansion Interface
- Nameplate
3.3 Port Details

The image above provides a closer look at the Type-A port, the combined TF/SIM card port, and the Type-C port, all protected by sealed covers.
4. Setup
4.1 Initial Charging
Before first use, fully charge the T80 tablet. Connect the provided 5.0V 2A-10W charger to the Type-C port (16) or the optional 4-pin pogo pin (20) on the device. The charge lamp (5) will indicate charging status.
4.2 SIM and TF Card Installation
- Locate the SIM/TF card slot (15) on the side of the device, protected by a sealed cover.
- Carefully open the sealed cover.
- Insert up to two Nano SIM cards and/or a Micro SD (TF) card (up to 256GB) into their respective slots. Ensure correct orientation.
- Close the sealed cover firmly to maintain the device's waterproof and dustproof rating.
4.3 Powering On/Off
- To Power On: Press and hold the Power button (14) until the screen illuminates.
- To Power Off: Press and hold the Power button (14) until the power options appear on the screen, then select 'Power Off'.
- To Restart: Press and hold the Power button (14) until the power options appear, then select 'Restart'.
5. Operating Instructions
5.1 Basic Navigation
- Touch Screen: The 8-inch IPS/AFFS FHD capacitive touch screen supports glove touch, wet finger operation, and active capacitive pens. Navigate the Android 10.0 interface by tapping, swiping, and pinching.
- Home Button (7): Returns to the home screen.
- Back Button (8): Returns to the previous screen or closes the current application.
- Volume Buttons (9, 10): Adjust the device's audio volume.
5.2 Network Connectivity
- Wi-Fi: Access Wi-Fi settings to connect to available wireless networks (supports dual-band 2.4GHz/5Ghz 802.11 a/b/g/n/ac).
- Cellular Data: With a Nano SIM card installed, enable mobile data in settings for 2G (GSM), 3G (WCDMA, EVDO), or 4G (FDD/TDD LTE) connectivity.
- Bluetooth: Enable Bluetooth 4.2 Low Energy (LE) in settings to pair with compatible devices.
5.3 Camera Operation
The T80 is equipped with a 5.0MP Front Camera (3) and a 13.0MP (AF) Main Camera (21) with flash LED. Open the camera application to capture photos and videos.
5.4 Navigation
The device supports GPS+Beidou+Glonass+AGPS+SBAS for precise positioning and navigation (EPO 2.5m accuracy). Use compatible mapping or navigation applications.
6. Optional Modules
The T80 tablet can be customized with various optional modules to suit specific industrial needs. The diagram below illustrates the locations of these extensions:

- Extension 1 (Rear): Supports UHF, LF, or HF RFID modules, or other customer-supplied modules for advanced data collection.
- Extension 2 (Side): UART (Chargepoint) for specialized communication or charging.
- Extension 3 (Top): Barcode Module for 1D/2D barcode and QR code scanning.
- Extension 4 (Rear): Temperature Pressure Sensor for environmental monitoring.
- Extension 5 (Front-side): Fingerprint Module for secure biometric authentication.
- Extension 6 (Front-side): NFC Module for near-field communication (NFC / 13.56M / ISO14443 / ISO15695).
6.1 Barcode Reader

The optional barcode module allows for efficient 1D/2D barcode and QR code scanning, essential for inventory management and logistics.
6.2 Fingerprint Function

The optional fingerprint module (G2010) provides a secure and convenient method for user authentication.
6.3 RFID Reader

With optional RFID modules (LF, HF, UHF), the T80 can read RFID tags for asset tracking and other applications.
6.4 NFC

The optional NFC module enables short-range wireless communication for tasks like data exchange or payment processing.
7. Specifications
| Feature | Description |
|---|---|
| Hardware | |
| CPU | ARM Cortex A73 Octa-core (2.0GHz) |
| GPU | Arm Mali-G72 MP3 |
| RAM | 8GB |
| Internal Memory | 128GB |
| Main Camera | 13.0MP (AF) with flash LED |
| Sub Camera | 5.0MP |
| Battery | 18900mAh |
| Display | 8 inch IPS/AFFS FHD 1920*1200 industrial 1000nit Sunlight-Readable |
| Touch Panel | Capacitive/frosted tempered film supports glove touch/spray/active capacitive pen |
| I/O, Sensors & Navigation | |
| SIM Card | Nano SIM card*2 |
| TF Card | Micro SD card (T-FLASH card); max 256GB |
| Charging Interface | Type-C & 4-pin pogo pin (magnetic) |
| Data Interface | USB Type-A (Host)*1, Type-C (OTG)*1 |
| UART (Optional) | UART TTL3.3 X2 onboard |
| RS232 (Optional) | RS232X1 |
| RS485 (Optional) | RS485X1 |
| Gravity Sensor | Support |
| Motion Sensor | Support |
| Direction Sensor | Support |
| Magnetic Field Sensor | Support |
| Gyro Sensor | Support |
| Rotation Vector Sensor | Support |
| Light Sensor | Support |
| Acceleration Sensor | Support |
| Temperature Pressure Sensor | Optional |
| Charger | 5.0V 2A-10W |
| Navigation | GPS+Beidou+Glonass+AGPS+SBAS (EPO 2.5m) |
| Appearance | |
| Size | 256*159*23mm (L×W×H) |
| Weight | 1015g |
| Color & Material | Black&Yellow; Black&Green; Black&Gray |
| Communications & Networking | |
| Phone Call | GSM /WCDMA/CDMA 1X/VoLTE |
| 2G | GSM/CDMA 1X/EDGE/GPRS/WAP |
| 2G Band | GSM(B2/3/5/8) |
| 3G | WCDMA 3.75G (HSDPA+ 42.2Mbps, HSUPA+ 11.5Mbps), EVDO |
| 3G Band | WCDMA(B1/2/5/8), Evdo: BC0/BC1 CDMA: BC0/BC1 |
| 4G | FDD: 150Mbps down, 50Mbps UP TDD: 150Mbps downlink, 50Mbps uplink |
| 4G Band | TD-LTE(B38/39/40/41); FDD LTE(B1/2/3/4/5/7/8/12/17/20/28) |
| WI-FI | Dual-band (2.4GHz/5Ghz) single stream 802.11 a/b/g/n/ac |
| BT | 4.2 Low Energy (LE) |
| Industrial & Reliability Design | |
| Shake-proof | 1-19Hz/1.0mm; 19-200Hz/1.0g |
| Dropproof / IK Rating | MIL-STD-810G/Method516.6/Procedure IV & Touch Panel IK05 |
| Waterproof | Class 7 (IEC 60529) |
| Dustproof | Class 6 (IEC 60529) |
| Reliability | MTBF>5000h; MTTR<0.5h |
| Operating Temperature | -20°C to 55°C |
| Storage Temperature | -40°C to 80°C |
| Relative Humidity (RH) | 5% to 95% |
| Operating Altitude | Max: 4,500 m (15,000 feet) |
| Certification / OS / Software | |
| Certification | 3C / FCC / CE / ROHS / IP67 (IEC 60529) |
| Language | English, Spanish, Portuguese (Brazil), Portuguese (Portugal), Italian, German, Dutch, French, Polish, Romanian, Turkish, Russian, Arabic, Indonesian, Malay, Thai, Vietnamese, Hindi, Hebrew, Simplified Chinese, Traditional Chinese, etc. |
| Operating System | Android 10.0 |
The T80 is built to withstand harsh conditions, as indicated by its IP67 rating for waterproof and dustproof capabilities.
The device's fast running capabilities are supported by its 8GB RAM and 128GB internal memory, allowing for smooth multitasking and data storage.
The 8-inch IPS/AFFS display is designed for clarity and readability even in sunlight, crucial for outdoor and industrial applications.

8. Maintenance
8.1 Cleaning
To clean the device, gently wipe the screen and body with a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use alcohol, solvents, or abrasive cleaners, as these can damage the device's protective coatings and seals.
8.2 Storage
When not in use for extended periods, store the T80 in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the sealed covers for ports are properly closed to maintain environmental protection.
8.3 Battery Care
To prolong battery life, avoid completely draining the battery frequently. It is recommended to keep the battery charge between 20% and 80% when possible. If storing the device for a long time, charge it to about 50% before storage.
9. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect the charger and wait a few minutes before attempting to power on again. If the issue persists, perform a hard reset by holding the power button for 10-15 seconds.
- Touch screen unresponsive: Try restarting the device. If the screen remains unresponsive, ensure there is no excessive moisture or debris on the screen.
- Network connectivity issues (Wi-Fi/Cellular): Check that Wi-Fi or cellular data is enabled in the settings. For cellular, ensure the SIM card is correctly inserted and activated. Try toggling airplane mode on and off.
- Slow performance: Close unnecessary background applications. Clear the device's cache through system settings. If performance issues continue, consider a factory reset (back up your data first).
- Optional module not working: Ensure the module is correctly installed and enabled in the device settings. Refer to the specific module's documentation for further troubleshooting.
10. User Tips
- Optimize for Outdoor Use: Utilize the sunlight-readable display by adjusting brightness settings. Ensure all port covers are securely sealed when operating in dusty or wet environments to maintain IP67 protection.
- Battery Management for Long Shifts: Given the large 18900mAh battery, for extended use, consider carrying a portable power bank that supports Type-C charging or utilizing the pogo pin charging option if available in your setup.
- Customizing Defined Buttons: Program the defined buttons (11, 12) for frequently used functions or applications to enhance workflow efficiency in industrial settings.
- Data Security: If using the optional fingerprint module, configure it for quick and secure access, especially in environments where data security is paramount.
11. Warranty and Support
11.1 Warranty
The HUGEROCK T80 tablet comes with a 24-month warranty. This warranty covers manufacturing defects and ensures the device meets its specified performance standards under normal use. For detailed warranty terms and conditions, please refer to your purchase agreement or contact your vendor.

The manufacturer focuses on quality, offering a life cycle greater than 5 years, a 2-year device warranty, free replacement within 30 days for unpacking failures, and a 1% spare parts guarantee for orders over 100 units.
11.2 Technical Support
For technical assistance, troubleshooting, or inquiries regarding your HUGEROCK T80 industrial tablet, please contact your vendor or refer to the official product website for support resources.
12. Certifications
The HUGEROCK T80 complies with various international standards and certifications, ensuring its quality, safety, and reliability:
- Product Certifications: 3C, FCC, CE, ROHS
- Environmental Protection: IP67 (IEC 60529) for Waterproof (Class 7) and Dustproof (Class 6)
- Ruggedness Standards: MIL-STD-810G/Method516.6/Procedure IV (Dropproof), Touch Panel IK05 (Impact Protection)

The image above displays various certificates, including Lithium Battery Test Report, CE, Safety Test Report, FCC, ROHS, ATEX, AGC Test Report, and CCC certificate, demonstrating the product's adherence to stringent quality and safety standards.
13. Application Scenarios
The T80 is designed for a wide range of customized application scenarios, including:

- Logistics: Storage/retail, vehicle management, collection and distribution.
- Medical: Drug tracing, medical waste tracing, mobile nursing, community medical service.
- City: Administration management, security protection, intelligent inspection, asset management.
- Agriculture: Agricultural machinery management, animal husbandry.
- Biological Information: Fingerprint information collection, quality management, face recognition.
- Industrial Manufacturing: Workline traceability, quality management, postsales service.
- Outdoor Sports: Extreme sports equipment, outdoor navigation, UAV controls.
- Surveying and Mapping Navigation: High precision surveying, digital construction site, indoor positioning.
14. Package Contents
The standard package for the HUGEROCK T80 includes:
- USB Cable
- Charger (5V 2A)
- Introduction Manual (this document)
- Screen Protector
- Packing Box (customizable logo)
- Aircraft Box
- Toolkit (optional)