1. Introduction
The Radtel R8000 (APX-8000) is a high-performance dual-band, dual-display portable two-way radio designed for reliable communication across various frequencies. This manual provides essential information for safe and effective operation, covering setup, features, and maintenance of your device.
Key features include 10W power output, 128 memory channels, dual LCD display, dual PTT, duplex working mode, and UHF/VHF cross-band reception. It also supports AM air band reception and FM radio reception.

Figure 1: Radtel R8000 with key features (10W power, 128 channels, FM/AM, dual LCD, dual PTT, duplex, UHF/VHF cross-band).
2. Package Contents
Please check the contents of your package to ensure all items are present:
- Radtel R8000 Radio Unit
- Li-ion Battery Pack
- Antenna
- Belt Clip
- Desktop Charger
- USB Charging Cable
- User's Manual (this document)
- Screwdriver (for belt clip installation)

Figure 2: Radtel R8000 package contents including radio, battery, antenna, charger, and accessories.
3. Initial Setup
Follow these steps to prepare your Radtel R8000 for first use:
- Install the Battery: Align the battery pack with the back of the radio unit. Slide the battery into place until it clicks securely. Ensure the battery release latch is engaged.
- Install the Antenna: Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.
- Charge the Battery: Connect the USB charging cable to the desktop charger, then plug the charger into a power outlet. Place the radio unit into the charging cradle. The charging indicator will show the charging status. Ensure the battery is fully charged before first use.
- Attach Belt Clip: Use the provided screwdriver to attach the belt clip to the back of the radio unit, if desired.
Watch the video below for a visual guide on assembly and basic operation:
Video 1: Radtel R8000 assembly and basic operation demonstration.
4. Operating Instructions
4.1 Power On/Off and Volume Control
To power on the radio, rotate the top-left knob clockwise. Continue rotating to adjust the volume. To power off, rotate the knob counter-clockwise until it clicks.
4.2 Dual Display and Independent Operation
The Radtel R8000 features an extra-large color screen with dual-frequency display, allowing two completely independent operating systems (Zone A and Zone B) to function simultaneously. This enables duplex working mode, where one zone can transmit while the other receives, or double receiving, where both zones can receive simultaneously on the same or different segments.

Figure 3: Close-up of the dual display, showing two independent operating systems.
4.3 Frequency Selection and Menu Navigation
Use the numeric keypad to directly input frequencies. The arrow buttons (up/down/left/right) allow for menu navigation and frequency adjustment. Press the 'Menu' button to access the main menu options such as SETP (settings), SQL (squelch), SAVE, TXP (transmit power), and ROGER (roger beep).
4.4 Push-to-Talk (PTT) Buttons
The radio features a double PTT design. Press and hold the appropriate PTT button to transmit on the selected frequency. Release to listen.

Figure 4: Multiple side buttons and double PTT design for versatile operation.
4.5 Key Features and Functions
- Duplex Different-Segment Relay: Enables relay functionality between different frequency segments.
- Same-Frequency Duplex Relay: Supports duplex relay on the same frequency.
- Repeater Mode: Allows setting frequency difference and direction for repeater operation. Supports UHF/HF cross-section relay or VHF/UHF cross-section relay, and U/U or V/V same frequency relay.
- 128 Memory Channels: Store your frequently used frequencies for quick access.
- Frequency Reversal Function: Reverses transmit and receive frequencies.
- Companding Function: Improves audio clarity by compressing and expanding the dynamic range of the signal.
- VOX Voice-Activated Transmitting: Allows hands-free transmission when voice is detected.
- Fast Frequency Scan: Quickly scans through frequencies to find active channels.
- Day/Night Theme Selection: Customize the display theme for optimal visibility in different lighting conditions.
- Single-band/Dual-band Display: Choose to display one or both frequency bands.
- Priority Channel Scanning: Prioritizes scanning of designated channels.
- Wide and Narrow Band Optional: Select between 25KHz (wide) and 12.5KHz (narrow) bandwidths.
- Operation Voice Prompts: Provides voice prompts in Chinese and English.
- Chinese and English Display Interface: User interface available in both languages.
- Single Tone Pulse Frequency: Supports 2100Hz, 1750Hz, 1000Hz, and 1450HZ for signaling to activate relays.
- Scrambling Function: Enhances communication privacy.

Figure 5: Frequency reversal, companding, and VOX voice-activated transmitting functions.

Figure 6: Setting frequency difference and direction in repeater mode.

Figure 7: Fast frequency scan capability.

Figure 8: Air Band Receive frequencies (AM 109-135MHz, FM 76-108MHz).
5. Specifications
| Feature | Description |
|---|---|
| Brand Name | Radtel |
| Model Number | R8000 |
| Walkie Talkie Type | Portable |
| Maximum Range | 5km-10km |
| Output Power (VHF/UHF) | 12W |
| Frequency Range (Receive/Transmit) | 136-174MHz & 400-470MHz 136-174MHz & 400-480MHz 136-174MHz & 420-520MHz 144-146MHz & 430-440MHz |
| Air Band Receive (AM) | 109MHz-135MHz |
| FM Radio Receive | 76MHz-108MHz (100KHz interval) |
| Storage Channels | 128 |
| Display | Yes |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |
| Material | Metal |
| Dimensions (L x W x H) | 124.5 x 61.49 x 33.88 mm |
| Channel Step Frequency | 5KHz / 6.25KHz / 10KHz / 12.5KHz / 25KHz / 50KHz / 100KHz |
| Signal-to-noise ratio | ≥ 45dB (Wide) / ≥ 40dB (Narrow) |
| Audio distortion | ≤5% |
| Working mode | F2D / F3E |
| Operation temperature | -20°C - 40°C |
| Antenna impedance | 50Ω |
| Power requirement | 7.4VDC |
| Weight | 490g |

Figure 9: Detailed parameter specifications for the Radtel R8000.
6. User Tips
- PC Programming: The Radtel R8000 can be programmed via a PC. A specific programming cable and software are required for this process. Please refer to the official Radtel website or support resources for the correct software and cable specifications.
- External Microphone: An external microphone can be connected to the device for enhanced audio input, which can be useful in noisy environments or for hands-free operation.
7. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the casing and display.
- Storage: When not in use for extended periods, store the radio in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for very long durations.
- Battery Care: To prolong battery life, avoid overcharging or completely draining the battery. Charge the battery regularly, even if the radio is not in frequent use.
- Antenna Care: Ensure the antenna is securely attached but not overtightened. Avoid bending or stressing the antenna, as this can affect performance.

Figure 10: The Radtel R8000 is constructed with wear-resistant and tough materials suitable for various environments.
8. Troubleshooting
If you encounter issues with your Radtel R8000, try the following solutions:
- Radio does not power on:
- Ensure the battery is correctly installed and fully charged.
- Check the power/volume knob is rotated clockwise past the 'off' position.
- No signal or poor reception:
- Verify the antenna is securely attached.
- Ensure you are within the effective communication range.
- Check that the frequency settings are correct for the channel you are trying to access.
- Adjust the squelch level (SQL) in the menu.
- No audio or distorted audio:
- Increase the volume.
- Check for any obstructions in the speaker or microphone.
- Ensure no external audio accessories are improperly connected.
- Cannot transmit:
- Ensure the correct PTT button is being pressed.
- Check if the frequency is busy or if there are any transmission restrictions (e.g., CTCSS/DCS settings).
- Verify transmit power (TXP) setting in the menu.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact Radtel customer service or visit their official website. Keep your purchase receipt as proof of purchase for any warranty claims.