1. Introduction
Thank you for choosing the DAREU EK820 Slim LED Keyboard. This manual provides detailed instructions on how to set up, operate, and maintain your keyboard to ensure optimal performance. The EK820 is a versatile mechanical keyboard featuring a slim design, Kailh LP switches, and dual connectivity options (wired USB and Bluetooth).

Figure 1: DAREU EK820 Slim LED Keyboard Overview
2. Package Contents
Please check the package for the following items:
- DAREU EK820 Slim LED Keyboard
- USB Cable (detachable)
- User Manual (this document)
3. Setup
3.1 Wired USB Connection
- Locate the Micro USB port on the DAREU EK820 keyboard.
- Connect the provided USB cable to the keyboard's Micro USB port.
- Plug the other end of the USB cable into an available USB port on your computer.
- The keyboard will be automatically recognized by your operating system. The LED backlight will illuminate.
3.2 Bluetooth Connection
The DAREU EK820 supports Bluetooth v3.0 and can pair with up to 5 devices.
- Switch to Bluetooth Mode: Press
Fn + Delsimultaneously. The 'Connect' LED indicator (located near Esc key) will blink rapidly, indicating it's in pairing mode. - Select a Bluetooth Profile: The keyboard has 5 Bluetooth profiles (F1-F5). To select a profile, press
Fn + F1,Fn + F2,Fn + F3,Fn + F4, orFn + F5. The 'Connect' LED will blink slowly for the selected profile. - Initiate Pairing: Press
Fn + Insfor 3 seconds to enter pairing mode for the selected profile. The 'Connect' LED will blink rapidly. - Pair with Your Device:
- On your computer, tablet, or smartphone, enable Bluetooth.
- Search for new Bluetooth devices.
- Select 'DAREU EK820' from the list of available devices.
- If prompted, enter the pairing code displayed on your screen.
- Once successfully paired, the 'Connect' LED will stop blinking and remain solid for a few seconds before turning off. The keyboard will automatically connect to the last paired device when in Bluetooth mode.

Figure 2: Bluetooth Function Diagram and Pairing Steps
3.3 Charging the Keyboard
The DAREU EK820 has a built-in 250mAh Lithium Polymer battery. To charge:
- Connect the USB cable to the keyboard's Micro USB port and the other end to a USB power source (e.g., computer USB port, USB wall adapter).
- The 'Battery Low' LED indicator will show charging status (specific behavior not detailed, typically solid while charging, off when full).
- A full charge takes approximately 2 hours and provides up to 40 hours of continuous use. A 5-minute charge can provide approximately 1 hour of use.
4. Operating Instructions
4.1 Switching Between Wired and Bluetooth Modes
- To Wired Mode: Connect the USB cable to the keyboard and your computer. The keyboard will automatically switch to wired mode.
- To Bluetooth Mode: Disconnect the USB cable. The keyboard will attempt to connect to the last paired Bluetooth device. If not connected, follow the Bluetooth pairing steps (Section 3.2).
4.2 Backlight Control
The DAREU EK820 features an LED backlight. Specific key combinations for backlight control (e.g., brightness, effects) are not explicitly detailed but are typically controlled via Fn key combinations (e.g., Fn + Arrow keys, Fn + specific function keys). Experiment with Fn + F-keys or arrow keys to adjust backlight settings.
4.3 N-Key Rollover
- Wired USB Mode: The keyboard supports full N-key rollover, meaning all keys pressed simultaneously will be registered.
- Bluetooth Mode: The keyboard supports 10-key rollover, allowing up to 10 keys to be registered simultaneously.

Figure 3: Battery Life and N-Key Rollover Details
4.4 Compatibility
The DAREU EK820 is compatible with a wide range of operating systems:
- Windows
- Mac OS X
- Android
- iOS

Figure 4: DAREU EK820 Features and Compatibility
5. Maintenance
5.1 Cleaning
- Disconnect the keyboard from your device before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and keyboard surface.
- For dust and debris between keys, use compressed air.
- Avoid using harsh chemicals, abrasives, or solvents.
5.2 Storage
- Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
6. Troubleshooting
6.1 Keyboard Not Responding (Wired Mode)
- Ensure the USB cable is securely connected to both the keyboard and the computer.
- Try a different USB port on your computer.
- Test the keyboard on another computer to rule out a computer-specific issue.
- Check if the cable is damaged; try a different compatible USB cable.
6.2 Bluetooth Connection Issues
- Ensure the keyboard is in Bluetooth mode (
Fn + Del). - Verify that Bluetooth is enabled on your host device (computer, tablet, phone).
- Make sure the keyboard is in pairing mode (
Fn + Insfor 3 seconds) for the selected profile (Fn + F1-F5). - Delete the keyboard from your device's Bluetooth list and attempt to re-pair.
- Ensure the keyboard battery has sufficient charge.
- Move the keyboard closer to your device to ensure it's within the 8m operating range.
6.3 Keys Not Registering / Ghosting
- In Bluetooth mode, remember there is a 10-key rollover limit. If you are pressing more than 10 keys simultaneously, some may not register. Switch to wired mode for full N-key rollover.
- Ensure the keycaps are properly seated on the switches.
- Clean any debris that might be under the keycaps or around the switches using compressed air.
6.4 Backlight Not Working
- Ensure the keyboard battery is charged, as low battery can affect backlight functionality.
- Check backlight control key combinations (e.g., Fn + Arrow keys or Fn + F-keys) to ensure it's not turned off or set to minimum brightness.
7. Specifications
| Feature | Detail |
|---|---|
| Model | DAREU EK820 |
| Type | Wired / Bluetooth Mechanical Keyboard |
| Interface Type | USB |
| Switch Type | Kailh LP Switch (Red/Blue options) |
| Actuation Distance | 1.5mm |
| Lifespan | 50 million keystrokes |
| Key Count | 87 keys (Tenkeyless) |
| Keycap Material | ABS (Laser Engraving) |
| Case Material | Aluminum top, plastic bottom |
| Dimensions (L x W x H) | 354 x 127.5 x 22.5 mm |
| Weight | 520g |
| Bluetooth Version | v3.0 |
| Bluetooth Multi-pairing | Max 5 devices |
| Bluetooth Operating Distance | 8m |
| Battery | 250mAh, 3.7V Lithium Polymer |
| Charging Time | Approx. 2 hours |
| Continuous Use Time | Up to 40 hours |
| USB Cable Length | 1.5m (detachable) |
| N-Key Rollover (Wired) | Full N-key rollover |
| N-Key Rollover (Bluetooth) | 10-key rollover |
| LED Indicators | Caps Lock, Num Lock, Battery Low, Connect |
| Compatibility | Windows, Mac OS X, Android, iOS |

Figure 5: Kailh LP Switch Characteristics (Red LP: Linear, Blue LP: Clicky)
8. Warranty and Support
8.1 Warranty Information
The DAREU EK820 Slim LED Keyboard comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
8.2 Manufacturer and Importer
- Manufacturer: DAREU
- Importer (Korea): DAREU KOREA (www.dareu.co.kr)
8.3 KC Certification
KC Certification Number: MSIP-CMI-DRU-EK820
9. User Tips
- Optimize Battery Life: If using Bluetooth mode, consider turning off the backlight when not needed to extend battery life.
- Multi-Device Convenience: Utilize the 5 Bluetooth profiles (Fn+F1 to Fn+F5) to quickly switch between your computer, tablet, and smartphone without re-pairing.
- Wired for Gaming: For competitive gaming or tasks requiring maximum responsiveness and full N-key rollover, always use the wired USB connection.
- Portable Design: The keyboard's slim profile and light weight (520g) make it ideal for carrying between different workstations or for travel.
10. Frequently Asked Questions (FAQ)
Q: How do I know if the keyboard is fully charged?
A: The 'Battery Low' LED indicator will typically change its state (e.g., turn off or change color) once the keyboard is fully charged. Refer to the LED indicator section in the full manual for specific behavior.
Q: Can I use the keyboard while it's charging?
A: Yes, you can use the keyboard in wired USB mode while it is charging.
Q: What is the difference between Kailh Red LP and Kailh Blue LP switches?
A: Kailh Red LP switches are linear, offering a smooth keystroke without a tactile bump or audible click. Kailh Blue LP switches are clicky, providing a distinct tactile bump and an audible click sound with each keypress.
Q: Why is my keyboard not connecting via Bluetooth?
A: Ensure Bluetooth is enabled on your device, the keyboard is in pairing mode (Fn+Ins for 3s), and you have selected an available Bluetooth profile (Fn+F1-F5). Try removing the keyboard from your device's Bluetooth list and re-pairing. Also, check the keyboard's battery level.