Introduction
Thank you for purchasing the Blueendless Adjustable Aluminum Tablet & Laptop Stand with integrated USB-C Hub. This device is designed to expand the connectivity of your USB-C enabled devices, offering a versatile solution for office, gaming, and multimedia needs. Please read this manual carefully to ensure proper setup and operation.
This product is available in two models:
- ST801A: 8-in-1 USB-C Hub without RJ45 LAN port.
- ST901A: 9-in-1 USB-C Hub with RJ45 LAN port.
Both models feature a 360° rotating and foldable stand, made from aluminum alloy for durability and efficient heat dissipation.
Package Contents
- Adjustable Aluminum Tablet & Laptop Stand (USB-C Hub)
- User Manual
Setup Instructions
- Unpack the Device: Carefully remove the USB-C Hub with iPad Stand from its packaging.
- Position the Stand: Place the stand on a stable, flat surface. The base features anti-slip silicone pads for stability.
- Adjust the Stand: The stand has a foldable design, allowing you to adjust its height and viewing angle from 70° to 180° for optimal comfort. It also features a 360° rotating turntable for easy screen sharing or viewing adjustments.
- Connect to Host Device: Connect the integrated USB-C cable from the hub to the USB-C port on your tablet, laptop, or other compatible device.
- Power Connection (Optional but Recommended): For optimal performance, especially when connecting multiple devices or an external hard drive, connect your device's original power adapter to the hub's USB-C Power Delivery (PD) port. This ensures sufficient power is supplied to all connected peripherals and charges your host device simultaneously.


Operating Instructions
Port Functions
The Blueendless USB-C Hub provides a range of ports to expand your device's capabilities:
- USB-C Power Delivery (PD100W): Connect your device's power adapter here to charge your host device and power the hub simultaneously. Supports up to 100W power delivery.
- HDMI 2.0 (4K@60Hz): Connect to an external monitor, TV, or projector for high-definition video output. Supports 4K resolution at 60Hz and 2K resolution at 144Hz.
- USB 3.0 Ports (3x): Connect USB peripherals such as keyboards, mice, USB flash drives, or external hard drives. These ports offer data transfer speeds of up to 5Gbps.
- SD/TF Card Slots: Insert SD or TF (MicroSD) cards for data transfer. Note: These slots cannot be used simultaneously. The hub will recognize the card slot that is used first.
- 3.5mm Audio Jack: Connect headphones or external speakers for audio output.
- RJ45 LAN Port (ST901A only): Connect an Ethernet cable for a stable wired internet connection. Supports 10/100/1000M speeds.



Stand Adjustments
- Rotation: The base of the stand features a high-density turntable that allows for 360° rotation. Gently flick the stand to rotate it to your desired viewing angle.
- Lifting/Tilting: The stand's arm can be adjusted to change the height and tilt of your device. This allows for a comfortable ergonomic setup for various tasks.

Compatibility
The USB-C Hub is compatible with various operating systems and devices that support a Type-C interface, including:
- Operating Systems: Mac OS, Windows 10/7, Linux, Android.
- Devices: Phones, Tablets (e.g., iPad), Laptops, Desktops, TVs, Projectors.

Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the hub and stand. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, you can fold the stand for compact storage.
- Environmental Conditions: Keep the device away from liquids, excessive moisture, and extreme heat to prevent damage.
- Heat Dissipation: The aluminum alloy material and hollow-out design are engineered for better heat dissipation, helping to prevent lagging or freezing during extended use.
Troubleshooting
- No power to connected devices or host device not charging:
- Ensure your device's original power adapter is connected to the hub's USB-C PD port. Your host device may not deliver the required power for all peripherals without external power.
- SD or TF card not recognized:
- The SD and TF card slots cannot be used simultaneously. Ensure only one card is inserted at a time. The hub will recognize the card slot that is used first.
- Video output issues (no display or flickering):
- Check all HDMI cable connections. Ensure your host device supports video output over USB-C and that your monitor is set to the correct input source. Verify that the resolution and refresh rate are supported by both your device and the monitor.
- Lagging or freezing during use:
- While the aluminum design aids in heat dissipation, prolonged heavy use with many peripherals can generate heat. Ensure adequate ventilation around the hub. Disconnect and reconnect the hub if issues persist.
- USB devices not recognized:
- Ensure the USB devices are properly inserted into the USB 3.0 ports. Try connecting the device directly to your host device to confirm it's functioning correctly. If using an external hard drive, ensure the hub is powered via the PD port.
Specifications
| Feature | ST801A (8-in-1) | ST901A (9-in-1) |
|---|---|---|
| Model Name | ST801A | ST901A |
| Input | Type-C port, PD port (PD100W) | |
| Output | 4K@60Hz HDTV Output*1, SD card slot*1, TF card slot*1, USB3.0 interface*3, 3.5mm headset*1 | 4K@60Hz HDTV Output*1, LAN RJ45 Port, SD card slot*1, TF card slot*1, USB3.0 interface*3, 3.5mm headset*1 |
| Operating Voltage | 5V~20V | |
| USB Transmission Rate | 5Gbps/s | |
| Color | Gray | |
| Material | Aluminum alloy + silica gel | |
| Folded Size | 165 × 152 × 49MM | |
| Cable Length | 100mm (15cm total length) | |
| Certifications | CE, FCC, RoHS | |

User Tips
- Tablet Compatibility: The stand is designed to accommodate various tablet sizes, including iPads. Its adjustable nature allows for a secure fit for most common tablets.
- Nintendo Switch: While not explicitly listed, the hub's compatibility with various Type-C devices and HDMI output suggests it may work with a Nintendo Switch for video output and peripheral connection, provided the Switch supports these functions via its USB-C port.
- MacBook Compatibility: The hub is fully compatible with MacBook models (e.g., MacBook 13") running Mac OS, providing expanded connectivity options.
- Optimal Performance: Always connect your device's power adapter to the hub's PD port when using multiple power-hungry peripherals (like external hard drives) to ensure stable operation and charging.
Warranty and Support
For any assistance, questions, or to report issues, please contact our support team. Refer to the original packaging or product listing for contact information.
A detailed user manual in PDF format is also available for download. Please check the product page or contact support for the link.